Search results for "device"
showing 10 items of 1286 documents
Direct temporal reconstruction of picosecond pulse by cross-correlation in semiconductor device
2012
Cross-correlation measurements using the two-photon absorption process in a semiconductor is experimentally demonstrated for two pulses of different wavelengths (shifted by ~200 nm) and durations (20 times ratio). These measurements were found to be highly repeatable and fully suitable for the determination of the temporal intensity profile of picosecond (ps) pulses.
MATERIALS AND PROCESSING ISSUES FOR THE MANUFACTURING OF INTEGRATED PASSIVE AND ACTIVE DEVICES ON FLEXIBLE SUBSTRATES
2008
Plast_ICs is a Public/Private Laboratory funded by Italian Government aimed to build a novel technological platform for the development of flexible electronics, mainly, but not solely, based on thin inorganic films. Integration of different functions, on single and/or multiple plastic foils, to generate a smart system is the final goal of the project. The building blocks of the platform will be presented, starting from the different plastic substrates characterization, going through the development of active devices, such as thin-film- transistors, and passive devices, like thin-film- resistors, capacitors, inductors. Fully inorganic elementary devices, based on optical patterning and in va…
Operating Modes of Sandwiched Light-Emitting Electrochemical Cells
2011
Light-emitting electrochemical cells (LECs) are promising lighting devices in which the redistribution of ionic charges allows for double electronic carrier injection from air-stable electrodes. Uncertainties about the mode of operation are limiting the progress of these devices. Using fast (with respect to the current growth time) but resolutive electrical measurement techniques, the electronic transport mechanism in state-of-the-art sandwiched devices can be monitored as a function of the operation time. The results indicate the formation of doped transport layers adjacent to the electrodes that reduces the extent of the central neutral light-emitting layer where electronic transport is l…
Effect of temperature on the orthodontic clinical applications of NiTi closed-coil springs
2013
NiTi spring coils were used to obtain large deformation under a constant force. The device consists on a NiTi coil spring, superelastic at body temperature, in order to have a stress plateau during the austenitic retransformation during the unloading. The temperature variations induced changes in the spring force. Objectives: The aim of this study is to investigate the effect of the temperature variations in the spring forces and corrosion behaviour simulating the ingestion hot/cold drinks and food. Study D esign: The springs were subjected to a tensile force using universal testing machine MTS-Adamel (100 N load cell). All tests were performed in artificial saliva maintained at different t…
Large area perovskite light-emitting diodes by gas-assisted crystallization:
2019
Halide perovskites have been gaining considerable attention recently for use in light-emitting applications, due to their bandgap tunability, color purity and low cost fabrication methods. However, current fabrication techniques limit the processing to small-area devices. Here, we show that a facile N 2 gas-quenching technique can be used to make methylammonium lead bromide-based perovskite light-emitting diodes (PeLEDs) with a peak luminance of 6600 cd m −2 and a current efficiency of 7.0 cd A −1 . We use this strategy to upscale PeLEDs to large-area substrates (230 cm 2 ) by developing a protocol for slot-die coating combined with gas-quenching. The resulting large area devices (9 device…
Bottom-up realization and electrical characterization of a graphene-based device.
2016
We propose a bottom-up procedure to fabricate an easy-to-engineer graphene-based device, consisting of a microstrip-like circuit where few-layer graphene nanoplatelets are used to contact two copper electrodes. The graphene nanoplatelets are obtained by the microwave irradiation of intercalated graphite, i.e., an environmentally friendly, fast and low-cost procedure. The contact is created by a bottom-up process, driven by the application of a DC electrical field in the gap between the electrodes, yielding the formation of a graphene carpet. The electrical resistance of the device has been measured as a function of the gap length and device temperature. The possible use of this device as a …
Smart composite films of nanometric thickness based on copper-iodine coordination polymers. Toward sensors.
2018
One-pot reactions between CuI and methyl or methyl 2-amino-isonicotinate give rise to the formation of two coordination polymers (CPs) based on double zig-zag Cu2I2 chains. The presence of a NH2 group in the isonicotinate ligand produces different supramolecular interactions affecting the Cu-Cu distances and symmetry of the Cu2I2 chains. These structural variations significantly modulate their physical properties. Thus, both CPs are semiconductors and also show reversible thermo/mechanoluminescence. X-ray diffraction studies carried out under different temperature and pressure conditions in combination with theoretical calculations have been used to rationalize the multi-stimuli-responsive …
DNA-based biosensor on flexible nylon substrate by dip-pen lithography for topoisomerase detection
2019
Dip-pen lithography (DPL) technique has been employed to develop a new flexible biosensor realized on nylon with the aim to detect the activity of human topoisomerase. The sensor is constituted by an ordered array of a DNA substrate on flexible nylon supports that can be exploited as a drug screening platform for anticancer molecules. Here, we demonstrate a rapid protocol that permits to immobilize minute quantities of DNA oligonucleotides by DPL on nylon surfaces. Theoretical and experimental aspects have been investigated to successfully print DNA oligonucleotides by DPL on such a porous and irregular substrate.
New concepts and applications in macromolecular chemistry of fullerenes
2010
A new classification on the different types of fullerene-containing polymers is presented according to their different properties and applications they exhibit in a variety of fields. Because of their interest and novelty, water-soluble and biodegradable C(60)-polymers are discussed first, followed by polyfullerene-based membranes where unprecedented supramolecular structures are presented. Next are compounds that involve hybrid materials formed from fullerenes and other components such as silica, DNA, and carbon nanotubes (CNTs) where the most recent advances have been achieved. A most relevant topic is still that of C(60)-based donor-acceptor (D-A) polymers. Since their application in pho…
Ultra-broad spectral photo-response in FePS3 air-stable devices
2021
Van der Waals materials with narrow energy gaps and efficient response over a broadband optical spectral range are key to widen the energy window of nanoscale optoelectronic devices. Here, we characterize FePS as an appealing narrow-gap p-type semiconductor with an efficient broadband photo-response, a high refractive index, and a remarkable resilience against air and light exposure. To enable fast prototyping, we provide a straightforward guideline to determine the thickness of few-layered FePS nanosheets extracted from the optical transmission characteristics of several flakes. The analysis of the electrical photo-response of FePS devices as a function of the excitation energy confirms a …