0000000000015300
AUTHOR
Giuseppe Filardo
showing 137 related works from this author
Optimization of selectivity for the electrocarboxylation of chloroacetonitrile
2004
Electrocarboxylation of benzyl halides at silver cathodes
2006
Anodic abatement of organic pollutants in water in micro reactors
2010
The electrochemical oxidation of oxalic acid (OA) was performed in a micro flow cell equipped with a boron doped diamond (BDD) anode. This preliminary study demonstrates that a flow cell with a micrometric distance between the cathode and the anode can be used to perform the electrochemical treatment of waters contaminated by organic pollutants in the absence of added supporting electrolytes with high abatements. The effect of the distance between the cathode and the anode, the flow rate and the current density on the abatement of oxalic acid and on the current efficiency was in particular studied.
Electrochemical Incineration of Dichloroethane. Influence of the anode material
2007
Electrochemical incineration of organic pollutants: effect of the nature of the pollutants and of the operative conditions
2010
Chimica supramolecolare della beta-ciclodestrina nell'anidride carbonica supercritica: studi spettroscopici
2006
A filter-press electrolytic cell with semi-continuous renewal of sacrifical electrodes
1989
Etude d'une cellule electrolytique dans laquelle une des electrodes est consummee avec remplacement de l'element sacrifie sans demontage de la cellule. Cette cellule est testee lors de l'electrocarboxylation de la N-phenylbenzalimine en acide amine
HOST-GUEST INCLUSION COMPLEXES BETWEEN PERACETYLATED B-CYCLODEXTRIN AND DIPHENYL(4-PHENYLPHENYL)PHOSPHINE IN SUPERCRITICAL CO2: COMPUTATIONAL STUDIES
2006
Gamma radiation induced polymerization of vinyl monomers in dense CO2
2002
Abstract The dispersion polymerization of methyl methacrylate in dense carbon dioxide, initiated by γ-rays, utilizing different polysiloxanes as polymeric stabilizers, was investigated. The progress of the reaction, as a function of the irradiation dose, was also studied and the occurrence of a gel effect has been detected. For comparison, the dispersion polymerization has been carried out in supercritical conditions ( T =65°C and 38 MPa) in the presence of 2,2′-azobis(isobutyronitrile) (AIBN) as initiator. High molecular weight polymer (M w > 1000 kg/mol) with narrow molecular weight distribution has been obtained both with γ-rays and AIBN. The electron scanning micrographs show that regul…
A New Simple Static Method for the Determination of Solubilities of Condensed Compounds in Supercritical Fluids
2002
Abstract A simple static method based on gravimetric measurements has been adopted to measure the solubility of benzenecarboxylic acid, 2-hydroxy-benzenecarboxylic acid, 4-hydroxy-benzenecarboxylic acid and 1,8-dihydroxyanthraquinone along several isotherms in the temperature range 318–357 K and the pressure interval 7–23 MPa. Solubility data have been correlated with the Zieger–Eckert approach, using the Fedor atomic and group contribution method to estimate the solubility parameter and the molar volume of the solutes. A good agreement was obtained between data reported in the literature and those determined using the proposed method which allows one to measure solubility mole fraction as …
Metodologie di fabbricazione di microreattori elettrochimici
2008
A one-pot method to enhance dissolution rate of low solubility drug molecules using dispersion polymerization in supercritical carbon dioxide
2009
The surfactant assisted polymerization of 1-vinyl-2-pyrrolidone in supercritical carbon dioxide in the presence of Piroxicam, selected as a model of a low aqueous solubility drug, was studied in order to prepare in a single step a polymeric composite to enhance the rate of dissolution of the pharmaceutical compound. Reactive entrapping was carried out at 65 degrees C in the P range 21-38MPa. Under proper operative conditions we obtained the composite under the form of sub-micron spherical particles with relatively narrow particle size distribution. Drug loadings higher than 12% (w/w) were obtained and XRD and Raman spectroscopy suggest that the anti-inflammatory agent is dispersed in the ma…
Ionizing radiation induced synthesis of polymers and blends with different structures
2005
A Gas Chromatographic Method To Measure Sorption of Supercritical Carbon Dioxide in Poly(vinylidenefluoride): a Comparison between two Different Tech…
2005
Incineration of oxalic acid at boron doped diamonds. In: Giornate dell'elettrochimica italiana
2007
DISPOSITIVO PER RIFLETTERE LA LUCE SOLARE
2016
La presente invenzione si riferisce ad un dispositivo per riflettere la luce solare, e ad un eliostato comprendente tale dispositivo. The present invention relates to a device for reflecting the solar light, and to a heliostat comprising such a device.
Inclusion complexes of triphenylphosphine derivatives and peracetylated -beta- cyclodextrin in supercritical carbon dioxide.
2007
Oxide anodes in electro-organic oxidation. Oxidation of maleic addon tungsten oxide anodes
1982
The electrochemical oxidation of maleic acid on tungsten anodes has been investigated. Glyoxal and carbon dioxide were the main products together with tartaric acid and acetaldehyde. Glyoxal is also obtained as the main product from the oxidation ofd-tartaric acid. Under the same conditions succinic acid is completely oxidized to carbon dioxide and water. The anodic dissolution of tungsten and the oxidation of water to oxygen become predominant in the final stages of the electrolyses.
Copolymerization of VDF and HFP in Supercritical Carbon Dioxide: Experimental Analysis of the Reaction Loci
2010
Free radical copolymerization reactions of vinylidene fluoride (VDF) and hexafluoropropylene (HFP) were carried out in supercritical carbon dioxide at T=50 °C. When ammonium carboxylate perfluoropolyether surfactants were used, the formation of polymer particles was observed provided that HFP mole fraction in the feed was not larger than 0.30. Under these conditions, the effect of the total interphase area of the polymer phase, Ap, on the product propertieswas investigated by comparing experiments with largely different amounts of stabilizer, i.e., ranging from precipitation (smaller Ap) to dispersion (larger Ap) polymerization systems. We found that the copolymer molecular weight distribut…
Supercritical-fluid extraction of chlorofluoroalkanes from rigid polyurethane foams
1996
Abstract Preliminary results about a process for recovering expanding agents chlorofluoroalkanes (CFCs) both trapped in the cavities and dissolved in the polymer from rigid polyurethane foams are reported. The performances of liquid and supercritical carbon dioxide, and of CO2-propane supercritical mixtures were compared. Better results in terms of extraction time and amount of extracted CFCs were obtained with finely ground materials and supercritical propane-carbon dioxide fluids.
Electrocatalytic carboxylation of chloroacetonitrile at a silver cathode for the synthesis of cyanoacetic acid
2008
Abstract The electrocatalytic carboxylation of chloroacetonitrile to cyanoacetic acid performed at silver cathodes was investigated both theoretically and experimentally. Silver exhibits powerful electrocatalytic activities towards the reduction of chloroacetonitrile. In CO 2 -saturated CH 3 CN, reduction of NCCH 2 Cl occurs at potentials that are about 0.7 V more positive than those observed at glassy carbon and gives cyanoacetic acid in good yields. Theoretical considerations on the effect of operative parameters on the performances of the process were confirmed by electrocarboxylation experiments performed in undivided cells equipped with sacrificial anodes both in a bench-scale electroc…
Polymerization of vinylidene fluoride with perfluoropolyether surfactants in supercritical carbon dioxide as a dispersing medium
2006
The heterogeneous polymerization of vinylidene fluoride (VDF) was investigated at 50 °C with supercritical carbon dioxide (scCO 2 ) as a dispersing medium and diethylperoxidicarbonate as an initiator in the presence of different perfluoropolyether surfactants. When FLK 7004A ammonium carboxylate salts were used at a 5% (w/w) concentration with respect to VDF, with an initial pressure of 31-45 MPa and with an olefin concentration of about 5.5 mol/L, monomer conversions up to 63% were obtained, corresponding to a final solid content higher than 200 g/L, and the polymer was collected at the end of the process in the form of a white powder completely composed of microspheres. The effects of the…
Dispersion Polymerization of Vinylidene Fluoride in Supercritical Carbon Dioxide
2006
The dispersion polymerization of vinylidene fluoride in supercritical carbon dioxide is investigated using two ammonium carboxylate perfluoropolyether stabilizers of different molecular weights. Under suitable operating conditions a polymer made of well-dispersed spherical particles has been obtained up to relatively high conversion. The experimental data of polymerization rate and molecular weight distribution are in good agreement with the predictions of a model previously developed. Such an agreement supports the conclusion that the polymerization kinetics is dominated by the interphase transport of the active radicals between the continuous phase and the polymer particles.
Grafting of Maleic Anhydride onto Isotactic Polypropylene in the Presence of Supercritical Carbon Dioxide as a Solvent and Swelling Fluid
2004
Grafting of maleic anhydride (MA) onto isotactic polypropylene (iPP) was carried out by thermal decomposition of dicumylperoxide (DCP) using supercritical carbon dioxide (scCO2) as a solvent and swelling fluid. Provided that the initial concentration of anhydride dissolved in scCO2 is higher than 1% w/w, the grafting occurs without significant molecular weight modification of the polymer, and with a proper selection of the operative conditions, a grafting level higher than 0.5% w/w with respect to the polymer mass was obtained. The amount of grafted MA was determined by FT-IR spectroscopy and polymer degradation was monitored by dynamic mechanical tests in the melt state. The effect of MA a…
Electrochemical oxidation of organics at metal oxide electrodes: The incineration of oxalic acid at IrO2-Ta2O5 (DSA-O2) anode
2008
Abstract The electrochemical incineration of oxalic acid (OA) at Ti/IrO2–Ta2O5 (DSA-O2) anode was investigated to find the influence of the operative parameters on the performances of the process. Polarization curves and chronoamperometric measurements indicate the probable occurrence of a direct electrochemical oxidation of OA at the surface of the DSA anode. In incineration electrolyses, the performances of the process in terms of OA conversion and current efficiency dramatically depend on the adopted operative conditions. Interestingly, very high OA removal and current efficiency were obtained when the process was performed at relatively high temperatures (50 °C) or in the presence of Na…
Two electrochemical methodologies for the synthesis of cyanoacetic acid
2005
Electrochemical incineraton of oxalic acid at boron doped diamond electrodes: influence of operative parameters
2006
Continuous dispersion Polymerization of methyl methacrylate in scCO2
2004
Complexation of phosphine ligands with peracetylated β-cyclodextrin in supercritical carbon dioxide: Effect of temperature and cosolvent on the equil…
2009
Abstract The interaction between peracetylated-β-cyclodextrin and tert-butyl and adamantyl functionalized triphenylphosphine derivatives was studied in supercritical carbon dioxide (scCO 2 ) based solvent media by UV–vis spectroscopy. The equilibrium constant for a 1:1 complexation reaction was obtained from titration spectra both in pure carbon dioxide and in the presence of methanol as a cosolvent in the temperature range 308–323 K to estimate the internal energy and entropy of the inclusion equilibrium. The values of the equilibrium constants were found significantly smaller than those obtained in aqueous solution with analogous phosphines and substantially independent of the nature of t…
Dispersion polymerization of methyl methacrylate in supercritical carbon dioxide stabilized with poly(ethylene glycol)-b-perfluoroalkyl compounds
2004
Abstract In this work selected components of an easily synthesible class of poly(ethylene glycol)-perfluoroalkyl block compounds were tested as stabilizers for the dispersion polymerization of methyl methacrylate in scCO 2 . As already observed in the case of different block surfactants the anchor soluble balance (ASB) of the stabilizer is the crucial parameter affecting the efficacy of the stabilization and the kinetics of the polymerization process. When stabilizers with appropriate ASB were used, high molecular weight poly(methyl methacrylate) was synthesized under the form of microspherical polymer particles with yields ranging up to 80%. In these experiments the occurrence of a gel-eff…
Polymer Synthesis in Supercritical Carbon Dioxide
2003
It is current opinion of most of the people involved in supercritical fluids (SCFs) technology that as the end of the twentieth century has been devoted to enlarge exploitation of compressed gases in separation processes the beginning of the twenty-first will be mainly aimed to improve their utilisation as solvents for reactions.
Carboxylation of a linear low density polyethylene via gamma irradiation in presence of carbon dioxide in subcritical and supercritical conditions
1994
Abstract In this work the molecular modifications induced in a linear low density polyethylene gamma irradiated in presence of carbon dioxide both in subcritical and supercritical conditions are presented. The obtained results indicate that this process can be a new and interesting way in order to graft oxidized groups in the polyethylene chains. Moreover it is worth noting that, together with these functionalization reactions, also a significant crosslinking occurs, with improvement in some mechanical tensile behaviour.
Experimental P-T-ro Measurements of Supercritical Mixtures of Carbon Dioxide, Carbon Monoxide, and Hydrogen and Semiquantitative Estimation of Their …
2007
The P-T-ρ behavior of the CO2-CO-H2 system was studied in the supercritical region under operative conditions close to those adopted to perform hydrogenation and hydroformylation reactions in dense CO 2, thus providing new interesting information on this fluid mixture. Experiments were performed in a fixed volume reactor in the temperature range from 298 K to 343 K changing the density and the composition of the fluid phase. The one-component (Hildebrand) solubility parameter of the mixture was estimated from experimentally measured P vs T profiles, and its dependence on the density and composition of the system was analyzed to study the antisolvent effect of the permanent gases. We have fo…
Utilizzo della termografia per l’individuazione dell’infestazione da punteruolo rosso, la ricerca scientifica sul punteruolo rosso e gli altri fitofa…
2008
The Use of t-Bu Functionalized Phosphine Ligands for Hydroformylation of High Molecular Weight Olefins in scCO2
2007
Electrochemical incineration of 1,2-dichloroethane: Effect of the electrode material
2008
The electrochemical incineration of 1,2-dichloroethane (EDC) at Pt, Au, boron-doped diamond (BDD), Ebonex, stainless steel, Ti/IrO2–Ta2O5 and PbO2 has been studied in acid media by cyclic voltammetry and bulk electrolysis. It has been shown that the performances of the process dramatically depend on the anodic material. Higher current efficiencies were obtained at BDD. In particular, at proper values of applied current density, it is possible to obtain the almost complete conversion of EDC to CO2 at BDD with current efficiencies higher than 40%.
Heterogeneous polymerization of 1-vinyl-2-pyrrolidone in scCO2 in the presence of Ibuprofen: a one pot process for the preparation of controlled rele…
2005
Investigation of Multicomponent Gas Sorption in Polymers: the Case of the Carbon Dioxide, Vinylidene Fluoride, PVDF System.
2007
Mass swelling of PVDF exposed to supercritical carbon dioxide
2004
Electrocarboxylation of chloroacetonitrile to cyanoacetic acid
2004
Incenerimento elettrochimico di acido ossalico in presenza di NaCl
2008
Modeling Heterogeneous copolymerization of fluorinated monomers in scCO2
2009
In recent years the use of supercritical carbon dioxide (scCO2) in polymer processing and reaction has emerged as a “green” alternative to replace both environmentally hazardous organic solvents and water, whose utilization involves the production of large amount of waste streams. Moreover, scCO2 is non-toxic, inexpensive, and often exhibits intense plasticizing effect on polymers. In this work, the copolymerization of fluorinated monomers in scCO2 is explored. Batch free-radical copolymerization reactions of vinylidene fluoride (VDF) and hexafluoropropylene (HFP) have been carried out at temperature of 50 C and pressure of 400 bar using DEPDC as initiator and different amounts of stabilize…
Influence of operative parameters on the electrochemical incineration of oxalic acid.
2008
The rate of polymerization in two loci reaction systems: VDF-HFP precipitation copolymerization in supercritical carbon dioxide
2011
When the copolymerization of vinylidene fluoride (VDF) and hexafluoropropylene (HFP) is carried out in supercritical carbon dioxide (scCO 2) under heterogeneous conditions, the reaction occurs both in the continuous CO 2-rich phase and in the dispersed polymer-rich phase. The two phases being characterized by different values of reactant concentrations and kinetic parameters, one would expect that the reaction kinetics is affected by the polymer phase holdup in the reactor. However, the reaction rate is almost insensitive to the amount of produced polymer, at least at specific reaction conditions. This apparent contradiction is discussed and clarified in this paper by a series of comparativ…
Electrochemical carboxylation of aldehydes and ketones with sacrificial aluminum anodes.
1986
Abstract The electrocarboxylation of aldehydes to the corresponding α-hydroxyacids was described as impossible with conventional electrochemical systems. It is reported here that it is possible to realize it in diaphragmless cells making of sacrificial aluminum anodes. The method can be used also for the electrocarboxylation of ketones with good yields.
Electrochemical incineration in a micro flow reactor: influence of operative parameters
2010
Electrochemical processes for the treatment of chlorinated ethanes in water solutions
In the present work, the electrochemical treatment of water solutions containing chloro ethanes was performed by cathodic reduction, anodic oxidation and coupled processes with the aim of evaluate the effectiveness of these methodologies.
INFLUENCE OF THE EXPERIMENTAL SYSTEM AND OPTIMIZATION OF THE SELECTIVITY FOR THE ELECTROCARBOXYLATION OF CHLOROACETONITRILE TO CYANOACETIC ACID
2004
The electrocarboxylation of chloroacetonitrile (ClACN) to cyanoacetic acid in undivided cells equipped with sacrificial anodes was investigated both in a bench-scale electrochemical batch reactor and in a continuous batch recirculation reaction system equipped with a parallel-plate electrochemical cell. Selectivity and faradaic yields higher than 90% were obtained by working under anhydrous conditions with low halide concentrations and at more negative potentials. It was found that the instantaneous selectivity in the carboxylate compound depends mainly on the [CO 2 ]/[ClACN] ratio at high substrate concentration and is close to 100% for low ClACN concentration. These results were consisten…
A Novel Gas Chromatographic Method to Measure Sorption of Dense Gases into Polymers
2006
A novel experimental approach to determine the solubility of gaseous compounds inside polymers is here described. The method is based on the gas chromatographic determination of the composition of the fluid phase at equilibrium with the polymer. To take into account the effect of the volume swelling on the measurement a suitable probe, nonabsorbable by the polymer, was added to the fluid phase. Under the adopted configuration the apparatus can operate up to 35 MPa and 80°C. This experimental technique has been used to determine the solubility of carbon dioxide in poly(vinylidene fluoride) using argon as a probe. The latter was chosen because it is negligibly absorbed by the polymer and does…
Electrochemical oxidation of tetramethoxy precursor as a key step for the synthesis of coenzyme Q10
2007
The feasibility of electrosynthesis of coenzyme Q10 (1) by electrooxidation of tetramethoxy precursor (2) has been investigated at carbon, Pt and BDD anodes in a divided cell. The process strongly depends on the applied potential, anode material and water content of the solvent. At carbon anodes in CH3CN/CH2Cl2 + 0.15 M Bu4NBF4 at proper operative conditions high faradic efficiency (>60%) and excellent selectivity (95–97%) of the target product were obtained. Keywords: Electrosynthesis, Coenzyme Q10, Anodic oxidation
Electroactivation of Transition Metal Redox Couples for the Carbonylation of Alcohols to Dialkylcarbonates
1998
Electrochemical systems which promote the carbonylation of methanol to dimethylcarbonate, based on the anodic activation of transition metal redox couples, or the Br−/Br2 couple, are poorly active for the carbonylation of ethanol to diethylcarbonate at room temperature and atmospheric pressure. Positive results have been obtained by combined addiction of PdBr2 and Bu4NBr to the system. In this way yields up to 50% in diethylcarbonate were obtained, with very good conductivities in long range electrolyses.
Particle Forming Polymerization of Vinyl Monomers in CO2 Based scFluids
2005
A continuous reaction system to investigate dispersion polymerization of vinyl monomers in supercritical carbon dioxide
2006
A laboratory-scale continuous reaction system using a stirred tank reac- tor was assembled in our laboratory to study the dispersion polymerization of vinyl monomers in supercritical carbon dioxide (scCO2). The apparatus was equipped with a suitable downstream separation section to collect solid particles entrained in the effluent stream from the reactor, whose monomer concentration could be measured online with a gas chromatograph. The dispersion polymerization of methyl methacry- late in scCO2 was selected as a model process to be investigated in the apparatus. The experiments were performed at 65 8C and 25 MPa with 2,2 0 -azobisisobutyroni- trile as the initiator and a reactive polysilox…
Electrochemical oxidation of substituted pyrroles.III.Anodic oxidation of 2,5-diphenyl-3-acetylpyrrole
1991
The electrochemical oxidation of 2,5-diphenyl-3-acetylpyrrole (I) is described. The cyclic derivative 1,6a-dihydro-2,5,6a-triphenyl-3,4-diacetylbenzo[g]pyrrolo[3,2-e]indole (II) was obtained in very good yield. However, when water was present in the reaction medium, a different derivative, 4-acetyl-2-hydroxy-2,5-diphenyl-3-(4′-acetyl-2′,5′-diphenyl-3′-yl)-2H-pyrrole (III), was obtained as the main product. 2,2′,5,5′-Tetraphenyl-4,4′-diacetyl-3,3′-dipyrryl (IV), a potentially useful intermediate for the synthesis of condensed pyrroles, was synthesized by zinc reduction of III.
A Novel Gas Chromatographic Method to Measure Solubility of Volatile Compounds in Polymers
2005
Synthetic Application of Homogeneous Charge Transfer Catalysis in the Electrocarboxylation of Benzyl Halides
1998
The results of an investigation on the performances of some outer sphere electron transfer homogeneous catalysts in the electrocarboxylation of 1-(p-isobutyl-phenyl)-1-chloroethane to 2-(p-isobutyl-phenyl)-propionic acid (Ibuprofen), using as catalysts the esters of benzoic and o-, m-, and p-phtalic acids, are reported. The performances of the catalysts are evaluated on the basis of the following parameters: faradic yields of the carboxylation and decomposition of the catalyst. The performances of dimethylisophtalate have been examined in greater detail. The rate of decomposition of the catalyst is related to the molar ratio [halide]/[catalyst].
Dispersion Copolymerization of Vinyl Monomers in Supercritical Carbon Dioxide.
2003
The thermally initiated free-radical dispersion copolymerization of methyl methacrylate (MMA) and N,N-dimethylacrylamide (DMA) in supercritical carbon dioxide has been studied in the presence of polysiloxane surfactants. The formation of a stable latex seems to be related to the presence of at least one reactive end group in the surfactant macromolecule, thus suggesting that anchoring of the stabilizer to the surface of the growing polymer particles occurs through chemical grafting. In the case of a molar ratio of DMA to MMA lower than 0.40, microspherical copolymer particles with yields ranging from 81 to 97% were collected from batch polymerizations carried out at 65 °C and 23-28 MPa usin…
Surfactant Assisted Polymerization of Tetrafluoroethylene in Supercritical Carbon Dioxide with a Pilot Scale Batch Reactor.
2008
Chain-free radical polymerization of tetrafluoroethylene (TFE) was carried out in supercritical carbon dioxide (scCO2), at 50 °C and 121–133 bar, with tertiary-amyl-per-pivalate as a free radical initiator, using a 5-L pilot scale batch reactor. Experiments were carried out both in the absence and in the presence of perfluoropolyether (PFPE) carboxylate surfactants. Stabilizers were employed under the free acid form and as sodium and calcium salts. An expanded fibrillated poly(TFE) was obtained in all experiments. In the case of surfactant-free polymerizations, the product was mainly constituted by irregular shape macroparticles having size in the range 200–500 μm. Quite interestingly, when…
Electrochemical reduction of macrocyclic polysulfonamides for the synthesis of polyazamacrocycles
2004
Modeling Heterogeneous copolymerization in scCO2
2008
ScCO2 as polymerization medium for high value polymers: two recent cases
2007
In recent years the use of supercritical carbon dioxide (scCO2) in polymer processing and polymerization reactions has merged as a “green” alternative to replace both organic solvents, environmentally hazardous (VOCs), and water, which use involves the production of large amount of waste streams. ScCO2 is non-toxic, inexpensive, and often exhibits high solubility in polymer matrixes. Moreover, it causes polymer plasticization, thus favoring the diffusion of low MW species (monomers, initiators or additives) in the polymer phase. In this work, the use of scCO2 as polymerization medium for two different special polymers is discussed. Fluorinated copolymers mainly find application in environme…
Electrochemical incineration of oxalic acid in a micro-gap flow cell
2009
Investigation of Multicomponent Sorption in Polymers from Fluid Mixtures at Supercritical Conditions: The Case of the Carbon Dioxide/Vinylidenefluor…
2008
The simultaneous sorption of carbon dioxide and vinylidene fluoride (VDF) in poly(vinylidenefluoride) from their supercritical (sc) mixtures was studied using an experimental method, already described in a previous publication, based on the gas-chromatographic determination of the equilibrium composition of the fluid phase in contact with the polymer. Argon was added to the system as a nonabsorbable molecular probe in the polymer to take into account the effect of the volume swelling on the measurement. Sorption behavior has been studied at 50 °C by changing the composition and the density of the supercritical phase. We have found that VDF dissolves in its polymer with concentrations much l…
Un unexpected ring carboxylation in the electrocarboxylation of substituted aromatic ketones
2004
Recovery of Perfluoropolyether Surfactants from PVDF and PTFE by Supercritical carbon Dioxide Extraction
2006
Elettrocarbossilazione di alogenuri benzilici su scala preparativa tramite catalisi omogenea di trasferimento di carica e catalisi eterogenea su arge…
2007
Dispersion Polymerization of Vynilidene Fluoride in scCO2: Effect of Perfluoropolyether Surfactants on the Molecular weight of the Polymer and Modell…
2006
Copolymerization of VDF and HFP in Supercritical Carbon Dioxide: A Robust Approach for Modeling Precipitation and Dispersion Kinetics
2011
A kinetic model is developed for the heterogeneous free-radical copolymerization of vinylidene fluoride and hexafluoropropylene in supercritical CO2. The model accounts for polymerization in both the dispersed (polymer-rich) phase and in the continuous (polymer-free) supercritical phase, for radical interphase transport, diffusion limitations, and chain-length-dependent termination in the polymer-rich phase. A parameter evaluation strategy is developed and detailed to estimate most of the kinetic parameters a priori while minimizing their evaluation by direct fitting. The resulting model predictions compare favorably with the experimental results of conversion and MWD at varying monomer fee…
Effective recovery of perfluoropolyether surfactants from PVDF and PTFE by supercritical carbon dioxide extraction
2007
Abstract The extraction of ammonium carboxylate perfluoropolyether surfactants from poly(vinylidenefluoride) (PVDF) and poly(tetrafluoroethylene) (PTFE) was performed with supercritical carbon dioxide. When proper conditions in terms of temperature, pressure and flow rate were used, extraction recoveries higher than 90% were obtained. For PVDF (with a concentration of surfactant of 5% w/w), at low pressure (12 MPa) and 40 °C, more than 100 min are necessary to have a quantitative extraction. On the other hand, at higher pressure (20 MPa) a quantitative recovery was obtained after few minutes. A strong influence of the temperature on the extraction recovery was also found. In the case of PTF…
Synthesys of coenzymes Qn by electrochemical oxidation of tetramethoxy precursor
2007
Electrochemical detosylation of macrocyclic polysulfonamides for the synthesis of cyclen
2004
Polymerization process
2005
Electrochemical Syntheses Involving Carbon Dioxide
1990
The recent developments of electrosynthetic processes involving carbon dioxide are reviewed. Both processes involving carbon dioxide alone and electrocarboxylations are taken under consideration. The first of these two fields, mainly projected towards the production of basic chemicals such as methanol or carbon monoxide, is at present at a stage of fundamental research. Some interesting developments have recently appeared in the literature, concerning the use of electrode materials, or of transition metal complexes with particular catalytic activity. Electrocarboxylations are at a stage of more applicative development: some processes have reached the stage of pilot plant, and other have int…
Irradiation of low density and high density polyethylenes in presence of carbon dioxide in subcritical and supercritical conditions
1998
Abstract The grafting of carboxylated and oxygenated functions on low density and high density polyethylenes is carried out by gamma irradiation in the presence of carbon dioxide. Both crosslinking and grafting of oxidised groups occur. The extent of these molecular modifications depends on the physical conditions of the gas phase and on the nature of the polymer matrix.
Modification of Poly(vinilydenefluoride) Porous Membranes by Grafting of Acrylic Acid Assisted by Supercritical Carbon Dioxide
2010
Aim of this work is to study the preparation of pH sensitive membranes for biomedical applications via thermally induced graft polymerization of acrylic acid (AA) on poly(vinilydenefluoride) (PVDF) assisted by supercritical carbon dioxide (scCO2). Using scCO2 as a solvent and swelling agent, the monomer and the initiator (benzoyl peroxide) could diffuse faster into the polymer matrix, distribute more uniformly and allows a better control of the final molecular architecture promoting grafting reactions rather than chain degradation processes. As polymer matrixes we are using commercial hydrophobic porous PVDF membranes. Grafted polymers are characterized by Fourier transform infrared spectro…
Electrochemical incineration of organic pollutants: effect of the nature of the pollutants and of the temperature
2009
The electrochemical oxidation of some organic pollutants, including three carboxylic acids (oxalic, formic and maleic), at boron doped diamond (BDD) and DSA anodes, using galvanostatic alimentation, was investigated in order to study the effect of the temperature and of the nature of the pollutants on the process. In incineration electrolyses, the performances of the process in terms of carboxylic acid conversion and current efficiency dramatically depend on the adopted operative conditions. The abatement of the organic pollutant depends on the nature of the carboxylic acid. Quite interestingly, the opposite effect of the nature of the substrate on the performances of the process was observ…
Catalytic systems based on transition metals for the carbonylation of methanol to dimethylcarbonate
1997
Abstract The results of an investigation on catalytic systems arising from the electrochemical activation of salts and complexes of several transition metals for the carbonylation of methanol to dimethylcarbonate (DMC) are reported. Metals were tested as inorganic salts or complexes with ligands such as 2,2′-bipyridine (bipy), 1,6-bis (2-oxyphenyl)-2,5-diaza-1,5-hexadiene (salen), 2,4-pentanedionate (acac), triphenylphosphine (TPP) in methanol at room temperature saturated with carbon monoxide at atmospheric pressure. Best faradic yields vs DMC were observed as follows: CuCl(bipy): 84.8%; PdCl 2 (bipy): 64.0%; CoCl 2 : 26.0%; RhCl 3 : 25.0%; AgBF 4 (bipy): 10.2%; AuCl 3 : 9.4%; Cr(acac) 3 :…
Misure termografiche da pallone aerostatico per la diagnosi precoce di attacchi da punteruolo rosso delle palme
2008
Dispersion polymerization of vinyl monomers in supercritical carbon dioxide in the presence of drug molecules: A one-pot route for the preparation of…
2008
The polymerization of 1-vinyl-2-pyrrolidone in supercritical carbon di- oxide in the presence of ibuprofen as a model drug was investigated as a new one-pot process for the preparation of polymer-based drug delivery systems (DDSs). The com- posites were prepared at 65 � C and P ¼ 31-42 MPa by changing the initial con- centration of the drug and the concentration of a crosslinking agent and that of a hydrophobic comonomer. The effects of these parameters on the performances of the polymerization and on the in vitro release kinetics of ibuprofen were studied. In all the experiments, part of the drug was entrapped inside the polymer particles and dissolved more slowly with respect to the pure …
Dispositivi microfluidici per lo studio di reazioni elettrochimiche
2008
Electrochemical synthesis of coenzymes Qn by oxidation of tetramethoxy precursors
2009
The electrochemical oxidation of tetramethoxy precursors (2) to coenzymes Q (n) (1) at a carbon anode was investigated both in a bench-scale batch electrochemical reactor and in a continuous recirculation reaction system equipped with a parallel-plate electrochemical divided cell. High faradic efficiency (> 60%) and excellent selectivity (> 90%) in coenzymes Q (n) were obtained in CH3CN or CH3CN/CH2Cl2 + 0.15 M Bu4NBF4 under potentiostatic or amperostatic alimentation.
Preparation of pH sensitive poly(vinilydenefluoride) porous membranes by grafting of acrylic acid assisted by supercritical carbon dioxide
2010
Aim of this work is to study the preparation of pH sensitive membranes for biomedical applications via thermal induced graft polymerization of acrylic acid (AA) on poly(vinilydenefluoride) (PVDF) assisted by supercritical carbon dioxide (scCO2). Using scCO2 as a solvent and swelling agent, the monomer and initiator (benzoyl peroxide) could diffuse faster and distribute more uniformly into the polymer matrix. A better control of the final molecular architecture should be achieved because bimolecular grafting reactions are accelerated with respect to chain degradation processes. Commercial hydrophobic PVDF porous matrixes were selected as model membranes. Grafted polymers were characterized b…
Electrocarboxylation of aromatic ketones: Influence of operative parameters on the competition between ketyl and ring carboxylation
2007
Abstract The purpose of this work is to investigate the effect of operational parameters on the competition between the formation of the target 2-hydroxy-2-arylpropanoic acid and ring carboxylation in the electrocarboxylation of aromatic ketones. For the investigated ketones, this competition has been found to be dramatically influenced by different parameters such as the water content and the ratio between the carbon dioxide and the ketone concentrations (q = [CO2]/[ketone]). In particular, the target carboxylic acid formation can be favoured with respect to ring carboxylation by operating at high q ratios or by addition of small amounts of H2O to the reaction medium. An increase of the wa…
Polymerization of methyl methacrylate through ionizing radiation in CO2-based dense systems
2000
Herein, we report the use of ionizing radiation to induce a dispersion polymerization reaction in dense CO2. As a model system, the polymerization of methyl methacrylate in the presence of poly(dimethylsiloxane) stabilizers was investigated. It was demonstrated that the dose plays the key role in the progress of the reaction and in the morphology of the resulting polymer. Dispersion polymerization carried out in the presence of mono- and bifunctionalized surfactants gave differently structured polymers. The polymers obtained have been characterized by scanning electron microscopy, solubility tests, and gel permeation chromatography, and the molecular structure has been related to dynamic me…
Complexation of phosphine ligands with peracetylated β-cyclodextrin in supercritical carbon dioxide: spectroscopic determination of equilibrium const…
2007
The interaction between peracetylated beta-cyclodextrin and several triphenyl phosphine derivatives was studied in supercritical carbon dioxide (scCO2) by UV-visible spectroscopy. The equilibrium constant for a 1:1 complexation reaction was obtained from titration spectra and calculated using two established mathematical models. The values of the equilibrium constants are 1-3 orders of magnitude smaller than those obtained in aqueous solution with analogous phosphines. This is likely due to the absence in scCO2 of the hydrophobic effect, which is replaced by a corresponding, but weaker, CO2-phobic effect. The largest value of Kf was found for complexes of diphenyl(4-adamantylphenyl)phosphin…
Influence of the nature of the substrate and of operative parameters in the electrocarboxylation of halogenated acetophenones and benzophenones
2005
Abstract The electrocarboxylation of halogenated acetophenones and benzophenones to the corresponding hydroxycarboxylic acids has been carried out in undivided cell equipped with aluminium sacrificial anode and using 1-methyl-2-pyrrolidinone (NMP) as the solvent. The radical anion generated by the electro-reduction of the aromatic ketone is involved in several competitive reactions which lead to the formation of the target hydroxycarboxylic acid, the corresponding alcohol and pinacol and the de-halogenated parent ketone. If sufficiently negative working potentials are imposed, the latter is reduced to the corresponding carboxylate, pinacol and alcohol. Very different results in terms of sel…
Electrochemical incineration of oxalic acid in a micro gap flow cell
2009
A one-pot method to enhance dissolution rate of low solubility drug molecules using dispersion polymerization in supercritical carbon dioxide
2009
Influence of operative parameters on the electrocarboxylation of benzyl halides at silver cathodes
2006
γ-radiation-initiated polymerization of vinylidene fluoride in dense carbon dioxide
2002
The γ-ray-initiated batch polymerization of vinylidene fluoride (VF2) has been investigated in dense carbon dioxide under relatively mild operative conditions (T ≤ 40 °C and P < 25 MPa). When the initial VF2 molar concentration was increased from 3.4 to 6.4 mol/L, monomer conversion increased from 20 to 73%; a similar trend was observed for the number-average molecular weight and the molecular complexity of synthesized poly(vinylidene fluoride) (PVDF) as determined from rheological measurements. Under all adopted experimental conditions, a synthesized PVDF polymer was collected in the form of a white powder. Despite the inherent heterogeneous character of the polymerization process, a homog…
CO2 as a C1-organic building block: Electrocarboxylation of aromatic ketones. A quantitative study of the effect of the concentration of substrate an…
2006
The purpose of this work is to establish and discuss quantitative relationships between the selectivity in preparative scale electrolysis and intrinsic and operational parameters for the electrocarboxylation of aromatic ketones. For the investigated ketones, under appopriate experimental conditions the selectivity of the process is mainly determined by the competition between carboxylation and protonation, de-halogenation reactions (when an halogenated ketone is involved), and possibly dimerizations involving the electrogenerated radical anion. A simple model was proposed to account for these unwanted side paths which allows to predict the dependence of the selectivity as a function of the …
The electrochemistry of carbon monoxide reductive cyclotetramerization to squarate anion
1978
Abstract The electrochemical reduction, of carbon monoxide to C4O2−4 squarate anion is investigated. Particular attention is devoted to the influence that solvents, electrolytes, electrodes and carbon monoxide pressure have on the yields. The main feature appears to be that strictly controlled conditions are not necessary for cyclotetramerization. In dmf — Bu4NBr the following yields vs reacted CO and circulated charge were obtained with different cathodes: Pt(49%, 34%); Au(48%, 29%); Al(47%, 38%); stainless steel (36%, 33%); graphite (39%, 31%). A distinct influence of the supporting electrolyte (inorganic and tetraalkylammonium halides) was however observed.
Host–guest inclusion complexes between peracetylated β-cyclodextrin and diphenyl(4-phenylphenyl)phosphine : computational studies
2006
PM3 and molecular dynamic calculations were performed upon the inclusion complexation of peracetylated β-cyclodextrin (Per-Ac-β-CD) with diphenyl(4-phenylphenyl)phosphine (DBP). Results show that the 4-phenylphenyl part of the DBP phosphine fits tightly in the cavity of the Per-Ac-β-CD, leading to the formation of stable inclusion complexes. Complexation energies indicate that the complex formed via the primary side of the Per-Ac-β-CD is more stable than that formed via the secondary side. Electrostatic potential mapping and frontier orbital analysis suggest that van der Waals interaction constitute a major driving force in the complexation of the DBP and Per-Ac-β-CD.
Experimental investigation and modelling of sorption phenomena in high pressure CO2/VDF/PVDF ternary systems
2007
Synthesis of hydrophilic polymers in supercritical carbon dioxide in the presence of a siloxane-based macromonomer surfactant: Heterogeneous polymeri…
2003
Batch free radical polymerization of 1-vinyl-2-pyrrolidone (VP) in super- critical carbon dioxide (scCO2) was studied in the presence of a reactive polysiloxane surfactant (PDMS-mMA). Phase behavior investigation showed that when the initial concentration of the surface active macromonomer was higher than 2.5% w/w with respect to the monomer, the reaction mixture, in the absence of efficient stirring, was initially opaque to the visible light, and it slowly turned to an orange tint. Polymeriza- tion experiments carried out with surfactant concentration higher than the aforemen- tioned value proceeded with a fast kinetics, and led to the formation of spherical nanoparticles with almost quant…
Copolymerization of VDF and HFP in Supercritical Carbon Dioxide: A Robust Approach for Modeling Precipitation and Dispersion Kinetics
2012
A kinetic model is developed for the heterogeneous free-radical copolymerization of vinylidene fluoride and hexafluoropropylene in supercritical CO 2. The model accounts for polymerization in both the dispersed (polymer-rich) phase and in the continuous (polymer-free) supercritical phase, for radical interphase transport, diffusion limitations, and chain-length-dependent termination in the polymer-rich phase. A parameter evaluation strategy is developed and detailed to estimate most of the kinetic parameters a priori while minimizing their evaluation by direct fitting. The resulting model predictions compare favorably with the experimental results of conversion and MWD at varying monomer fe…
Electrochemical production of initiators for polymerization processes
2007
The most important technological interest in initiator production lies, in the electrosynthesis of complex catalytic systems, i. e. coordination compounds and Ziegler-Natta catalysts, although the choice of olefins to be polymerized with these electrosynthesized complexes is still limited to ethylene and to very few other monomers.
Sorption of high pressure fluid mixtures into semi-crystalline polymers: investigation of the system carbon dioxide/vinylidenefluoride/poly(vinyliden…
2008
A novel experimental apparatus for measuring gas absorption has been adopted to study sorption of carbon dioxide CO2 and vinylidenefluoride (VDF) in a semi crystalline polymer, namely poly(vinylidenefluoride) (PVDF). The experimental technique allows to calculate simultaneous absorption of different components in the polymer phase, through a gas chromatographic determination of the composition of the fluid phase. To take into account indirectly the polymer swelling, a suitable not-absorbable probe, namely argon, has been added to the fluid phase. Concentrations of molecules absorbed in the polymer phase were simply calculated through mass balance equations written for each component in the …
Utilization of impedance spectroscopy to investigate the self-assembly behavior of amphiphiles soluble in supercritical carbon dioxide: Preliminary r…
2007
Abstract A mixture of CO 2 , water, methyl orange (MO) and Dynol 604 surfactant was analyzed at 309 K and 20 MPa simultaneously by impedance and UV–vis spectroscopy. A plot of the static dielectric constant as a function of the surfactant concentration was obtained using a suitable equivalent circuit to elaborate impedance data. Experimental points can be fitted by two different straight lines whose intersection occurs at about 0.13% (w/w) concentration of Dynol. When the surfactant concentration crossed the aforementioned value, a peak was detectable in the UV–vis spectrum at a wavelength range corresponding to the absorption of MO; absorbance of the peak increased with the surfactant conc…
Hydroformylation of 1-Octene in scCO2 with Rh Catalyst in the Presence of Non-fluorinated Ligands
2006
Direct electrochemical detosylation of tetratosylcyclen to cyclen with carbon cathodes
2005
The electrochemical detosylation of tetratosylcyclen to cyclen (1,4,7,10-tetraazacyclododecane) in aprotic solvents at a carbon cathode was investigated both in a bench-scale batch electrochemical reactor and in a continuous batch recirculation reaction system equipped with a parallel-plate electrochemical cell. Yields and faradaic efficiency in cyclen, respectively, of 80 and 55% were obtained in the bench-scale reactor working in acetonitrile. It was found that the faradaic efficiency in cyclen depends on the competition between the reduction of the tetratosylcyclen and parasitic processes as the reduction of the tetraalkylammonium cations present in the supporting electrolyte. We have ob…
Continuous dispersion polymarization of vinyl monomers in supercritical carbon dioxide
2004
Electrochemical Incineration of oxalic acid at boron doped diamonds
2007
An unexpected ring carboxylation in the electrocarboxylation of aromatic ketones
2006
The electrocarboxylation of various aromatic ketones, carried out in N-methyl-2-pyrrolidone (NMP) in a diaphragmless cell equipped with a carbon cathode and an aluminium sacrificial anode, yielded, among the products, the target hydroxy acids, the corresponding alcohols and pinacols and, quite surprisingly, detectable amounts of substituted benzoic acids and cycloexene carboxylic acids. These compounds arise from a never reported before electrocarboxylation on the aromatic ring, respectively, for substitution of an aromatic hydrogen and from an addition reaction. For example, the electrocarboxylation of acetophenone gave rise to the substituted benzoic acids in ortho, para and meta position…
Optimization of the selectivity for the electrocarboxylation of chloroacetonitrile to cyanoacetic acid
2004
Inclusion complexes of triphenylphosphine derivatives and peracetylated-β-cyclodextrin in supercritical carbon dioxide
2008
The supramolecular chemistry of peracetylated-β-CD (perAc-β-CD) as a host for triphenyphosphine derivatives has been studied in supercritical (scCO2) using UV absorption spectroscopy. It was found that the association constant in scCO2 at 40°C and 300 bar is 10 to 1000 times smaller compared to analogous systems in aqueous solvent. Studies of the thermodynamics of the inclusion process found an enthalpy of association of -30 kJ/mole and an entropy of -55 J/moleK. This difference with respect to water is attributed to the absence of the hydrophobic effect in scCO2 due to the much smaller polarity of scCO2 versus water. To further explore the effect of the solvent on the association constant,…
Sacrificial Anodes in the Electrocarboxylation of Organic Chlorides
1984
Modification of Polymers in Supercritical Carbon Dioxide
2003
The interaction of scFluids and polymers are governed by the intermolecular forces between solvent-solvent, solvent-polymer segment, and polymer segment-segment pairs. Because of its symmetry, within reasonable pressure values, CO2 does not have a dipole moment, but it does have a quadrupole moment significant over a much shorter distance than dipolar interactions. The quadrupole moment and the Lewis acidity of CO2 imparts to the carbon dioxide the peculiarity to be a solvent for selected classes of polymers like perfluorinated polyacrylates, polysiloxanes and polyether-polycarbonate diblock copolymers [1–3].
A Gas Chromatographic Method to Measure Sorption of Supercritical Carbon Dioxide in Polymers
2005
Electrochemical oxidation of 2,4,5-triaryl-substituted pyrroles.II. Oxidative dimerization of 4,5-diphenyl-2-mesitylylpyrrole
1989
2,4,5-Triaryl-substituted pyrroles lead, upon chemical or electrochemical oxidation, to an intermediate β-β'-dimer, which, in the course of the reaction, undergoes further oxidation to a tetracyclic derivative. To improve the selectivity towards the uncyclized dimer the oxidation of a triarylpyrrole in which the ortho positions of the phenyl group in position 2 are hindered by the presence of methyl groups was attempted. The cyclization was hindered, but an α-β'-dimer was obtained as the major product. An unexspected isomeric α-β'-dimer, in which the mesitylyl group is shifted into the β position of the pyrrole ring which undergoes the oxidation, was obtained in minor amounts. Electroanalyt…
effect of the temperature on the electrochemical incineration of organic pollutants
2009
Peracetylated β‐cyclodextrin as solubilizer of arylphosphines in supercritical carbon dioxide
2006
Abstract Effect of peracetylated β-cyclodextrin on the solubility of diphenyl(4-phenylphenyl)phosphine in supercritical carbon dioxide medium has been investigated. As shown by gravimetric measurements, the presence of cyclodextrin (CD) (1 equivalent) allows to increase the solubility of phosphine (P) in supercritical carbon dioxide (scCO 2 ) (40 °C, 35.2 MPa, nominal system density 0.89 g/mL). This solubility enhancement was attributed to host–guest interactions in scCO 2 as the P was recovered in the form of an inclusion complex. Furthermore, a diffuse reflectance spectroscopy study on the samples recovered after the experiments and on various CD/P solid mixtures obtained by co-grinding i…
Polimerizzazione eterogenea di monomeri fluorurati in biossido di carbonio supercritico: sintesi di polivinilidenfluoruro
2004
Supramolecular Chemistry of Cyclodextrins in Supercritical Carbon Dioxide: Spectroscopic Investigations
2007
Two electochemical methodologies for the synthesis of cyanoacetic acid
2005
Electrochemical incineration of oxalic acid at boron doped diamond anodes: Role of operative parameters
2008
The electrochemical incineration of oxalic acid (OA) at boron doped diamond (BDD) anodes was investigated both theoretically and experimentally in order to find the influence of the operative parameters on the performances of the process. Polarization curves and chronoamperometric measurements indicate the probable occurrence of a direct electrochemical oxidation of OA at the surface of the BDD anode at low pH and of a hydroxyl radical-mediated reaction at high pH. When incineration electrolyses are performed at low pH with potentiostatic alimentation, a dramatic influence of the potential is observed. In amperostatic incineration, high CE are obtained when most part of the process was unde…
Electrochemical carboxylation of benzal chloride
1984
Abstract The clectrocarboxylation of benzal chloride to -chlorophenylacetic and phenylmalonic acids is realized in diaphragmless cells with aluminium sacrificial anodes. Yields respectively up to 50% and 30% can be obtained. Phenylacetic acid is always present among the products.
Investigation of Dense Gas Sorption in Polymers by a Gas Chromatographic Method
2006
Hydroformylation of 1-Octene in Supercritical Carbon Dioxide: Can Alkylation of Arylphosphines with tertButyl Groups Lead to Soluble and Active Catal…
2008
Abstract The possibility of increasing the solubility and activity of rhodium catalysts in the hydroformylation of 1-octene in supercritical carbon dioxide (scCO2) by attachment of tertbutyl (tBu) groups to the triarylphosphine ligand was investigated. The solubility of the parent and monoalkylated ligands in a mixture of gaseous components (CO2/CO/H2) was evaluated by visual observation in a view cell. In the case of triphenylphosphine, introduction of one tertbutyl group does not seem to affect the solubility of the phosphine. When the behaviour of (diphenyl)biphenylphosphine and (para-tertbutyldiphenyl)biphenylphosphine was compared a clear solubilising effect of the tBu group was observ…
Electrocarboxylation of benzyl chlorides at silver cathode at the preparative scale level
2008
Abstract The electrocarboxylation of benzyl chlorides to the corresponding carboxylic acids performed at silver cathodes was investigated both theoretically and experimentally in order to find the influence of the operative parameters on the selectivity and on the Faradic efficiency of the process. Theoretical considerations were confirmed by the electrocarboxylation of 1-phenyl-1-chloroethane performed in undivided cells equipped with sacrificial anodes both in a bench-scale electrochemical batch reactor and in a continuous batch recirculation reaction system equipped with a parallel plate electrochemical cell. Selectivity and Faradic yields higher than 80% and 70%, respectively, were obta…
Dispersion polymerization of vinyl monomers in supercritical carbon dioxide in the presence of drug molecules: A one-pot route for the preparation of…
2008
Utilization of dense carbon dioxide as an inert solvent for chemical syntheses
2010
Influence of operative parameters on the electroChemical incineration of oxalic acid at boron-doped diamond electrodes
2006
Elektrocarboxylierung organischer Chloride mit Zehrandon
1984
Carboxylation par CO 2 de chloro-1 propane, -butane, α-chlorotoluene, dichlorobenzene, chloro-1 naphtalene et chloro-1p ethylbenzene en presence d'une anode de Al dans DMF-bromure de tetrabutylammonium
Synthesis of cyanoacetic acid by carbon dioxide and electrogenerated acetonitrile anion in undivided cells equipped with sacrificial anodes
2008
The electrochemical synthesis of cyanoacetic acid was performed by cathodic reduction of tetraalkylammonium salts (R4NX) in acetonitrile in undivided cells equipped with sacrificial anodes with concomitant or subsequent addition of carbon dioxide. These syntheses avoid the use of dangerous reagents, yield cyanoacetic acid in moderate faradic yields and confirm that the cathodic reduction of tetraalkylammonium salts in the presence of acetonitrile leads to the formation of the anion CNCH2-.
Heterogeneous polymerization of vinylidene fluoride in scCO2 in the presence of perfluoropolyether surfactants
2004
Particle Forming polymerization of 1-Vinyl-2-Pyrrolidone in SCCO2 in the Presence of Ibuprofen: a One Pot Process for the Preparation of Controlled R…
2006
Preparation of drug-polymer composites by polymerization in supercritical carbon dioxide: a new method to increase the dissolution rate of bioactive …
2008
Elektrochemische Prozesse in superkritischen Phasen
2006
Sintesi del coenzima Q10
2007
Early warnings of Rhynchophorus ferrugineus infestation of Phoenix canariensis: a proximity thermal sensing approach
2011
Phoenix canariensis represents one of the most relevant ornamental plants within Mediterranean environment. In the last few years the infestation of a curculio coleopteron, namely the Rhynchophorus ferrugineus, caused a widespread decimation of these palms. Unluckily damages caused by the insect are evident only in the advanced phase of the disease making futile almost any plant treatment. Early warning of this disease may represents the only way to setup efficient actions to fight the coleopteron in trees where it takes over, thus limiting its spreading in contiguous palms. This research aims to achieve the former result by processing: i) short and long-wave images of the crown acquired du…
Electrochemical processes for the treatment of dichloroethane in water solutions
2008
Gamma radiation induced maleation of polypropylene using supercritical CO 2 : preliminary results
2000
Abstract The charging of maleic anhydride (MA) and dicumyl peroxide (DCP) into polypropylene matrices has been carried out by CO2 in supercritical conditions. The grafting of MA into polymer chains was done through gamma irradiation in CO2 atmosphere (0.1 MPa, 25°C). The grafting was successful and the amount of grafted anhydride was dependent on the amount of MA and DCP charged into the polypropylene matrix. The presence of grafted succinic anhydride was shown by FT-IR spectroscopy and its amount was determined through a calibration curve derived from standard samples. The effect of swelling due to supercritical CO2, maleic anhydride grafting and gamma irradiation on the molecular structur…