0000000000040459
AUTHOR
Gunta Kunakova
showing 21 related works from this author
Catalyst-free vapour-solid technique for deposition of Bi2Te3 and Bi2Se3 nanowires/nanobelts with topological insulator properties.
2015
We present a simple two-stage vapour–solid synthesis method for the growth of bismuth chalcogenide (Bi2Te3, Bi2Se3) topological insulator nanowires/nanobelts by using Bi2Se3 or Bi2Te3 powders as source materials. During the first stage of the synthesis process nanoplateteles, serving as “catalysts” for further nanowire/nanobelt growth, are formed. At a second stage of the synthesis, the introduction of a N2 flow at 35 Torr pressure in the chamber induces the formation of free standing nanowires/nanobelts. The synthesised nanostructures demonstrate a layered single-crystalline structure and Bi : Se and Bi : Te ratios 40 : 60 at% for both Bi2Se3 and Bi2Te3 nanowires/nanobelts. The presence of…
Sensing properties of assembled Bi2S3nanowire arrays
2015
Bismuth sulfide (Bi2S3) nanowires were grown in porous aluminium oxide template and a selective chemical etching was applied to transfer the nanowires to a solution. Well aligned nanowire arrays were assembled on pre-patterned silicon substrates employing dielectrophoresis. Electron beam lithography was used to connect aligned individual nanowires to the common macroelectrode. In order to evaluate the conductometric sensing performance of the Bi2S3 nanowires, current–voltage characteristics were measured at different relative humidity (RH) levels (5–80%) / argon medium. The response of the Bi2S3 nanowires depending of RH is found to be considerably different from those reported for other ty…
Bulk-free topological insulator Bi 2 Se 3 nanoribbons with magnetotransport signatures of Dirac surface states
2018
Many applications for topological insulators (TIs) as well as new phenomena require devices with reduced dimensions. While much progress has been made to realize thin films of TIs with low bulk carrier density, nanostructures have not yet been reported with similar properties, despite the fact that size confinement should help reduce contributions from bulk carriers. Here we demonstrate that Bi2Se3 nanoribbons, grown by a simple catalyst-free physical-vapour deposition, have inherently low bulk carrier densities, and can be further made bulk-free by size confinement, thus revealing the high mobility topological surface states. Magneto transport and Hall conductance measurements, in single n…
Dielectrophoretic alignment and electrical characterization of CuO nanowire-based systems
2021
Abstract Dielectrophoresis is used to assemble nanowires between metallic electrodes to form scalable functional interconnects. The dielectrophoresis parameters are investigated for semiconductor copper oxide (CuO) nanowires that are desirable for energy conversion and storage, gas sensors and nanoelectromechanical systems. Experimental yields of multiple- and single-nanowire interconnects are explored at dielectrophoresis frequencies from 500 Hz to 500 kHz. The electrical properties of nanowire-electrode physical contact interfaces formed by dielectrophoresis, metal deposition, and dry mechanical transfer are investigated. The electrical transport mechanism in these interconnects is determ…
High-Mobility Ambipolar Magnetotransport in Topological Insulator Bi2Se3 Nanoribbons
2021
Nanoribbons of topological insulators (TIs) have been suggested for a variety of applications exploiting the properties of the topologically protected surface Dirac states. In these proposals it is crucial to achieve a high tunability of the Fermi energy, through the Dirac point while preserving a high mobility of the involved carriers. Tunable transport in TI nanoribbons has been achieved by chemical doping of the materials so to reduce the bulk carriers' concentration, however at the expense of the mobility of the surface Dirac electrons, which is substantially reduced. Here we study bare ${\mathrm{Bi}}_{2}{\mathrm{Se}}_{3}$ nanoribbons transferred on a variety of oxide substrates and dem…
Surface structure promoted high-yield growth and magnetotransport properties of Bi2Se3 nanoribbons
2019
AbstractIn the present work, a catalyst-free physical vapour deposition method is used to synthesize high yield of Bi2Se3 nanoribbons. By replacing standard glass or quartz substrates with aluminium covered with ultrathin porous anodized aluminium oxide (AAO), the number of synthesized nanoribbons per unit area can be increased by 20–100 times. The mechanisms of formation and yield of the nanoribbons synthesized on AAO substrates having different arrangement and size of pores are analysed and discussed. It is shown that the yield and average length of the nanoribbons can base tuned by adjustment of the synthesis parameters. Analysis of magnetotransport measurements for the individual Bi2Se3…
Resistive state triggered by vortex entry in YBa 2 Cu 3 O 7−δ nanostructures
2014
We have realized YBa2Cu3O7-delta nanowires and nano Superconducting Quantum Interference Devices (nanoSQUID). The measured temperature dependence of the wire resistances below the superconducting transition temperature has been analyzed using a thermally activated vortex entry model valid for wires wider than the superconducting coherence length. The extracted zero temperature values of the London penetration depth, lambda(0) similar or equal to 270 +/- 15 nm, are in good agreement with the value obtained from critical current modulations as a function of an externally applied magnetic field in a nanoSQUID implementing two nanowires.
Young’s modulus and indirect morphological analysis of Bi2Se3nanoribbons by resonance measurements
2017
An electrostatically induced resonance behaviour of individual topological insulator Bi2Se3 nanoribbons grown by a catalyst free vapour-solid synthesis was studied in situ by scanning electron microscopy. It was demonstrated that the relation between the resonant frequencies of vibrations in orthogonal planes can be applied to distinguish the nanoribbons with rectangular cross-sections from the nanoribbons having step-like morphology (terraces). The average Young's modulus of the Bi2Se3 nanoribbons with rectangular cross-sections was found to be 44 ± 4 GPa.
Photoconductive properties of Bi2S3nanowires
2015
The photoconductive properties of Bi2S3 nanowires synthesized inside anodized alumina (AAO) membrane have been characterized as a function of illuminating photon energy between the wavelengths of 500 to 900 nm and at constant illumination intensity of 1–4 μW·cm−2. Photoconductivity spectra, photocurrent values, photocurrent onset/decay times of individual Bi2S3 nanowires liberated from the AAO membrane were determined and compared with those of arrays of as-produced Bi2S3 nanowires templated inside pores of AAO membrane. The alumina membrane was found to significantly influence the photoconductive properties of the AAO-hosted Bi2S3 nanowires, when compared to liberated from the AAO membrane…
Topological insulator nanoribbon Josephson junctions: Evidence for size effects in transport properties
2020
We have used Bi$_2$Se$_3$ nanoribbons, grown by catalyst-free Physical Vapor Deposition to fabricate high quality Josephson junctions with Al superconducting electrodes. In our devices we observe a pronounced reduction of the Josephson critical current density $J_c$ by reducing the width of the junction, which in our case corresponds to the width of the nanoribbon. Because the topological surface states extend over the entire circumference of the nanoribbon, the superconducting transport associated to them is carried by modes on both the top and bottom surfaces of the nanoribbon. We show that the $J_c$ reduction as a function of the nanoribbons width can be accounted for by assuming that on…
High-Yield Growth and Tunable Morphology of Bi2Se3 Nanoribbons Synthesized on Thermally Dewetted Au
2021
The yield and morphology (length, width, thickness) of stoichiometric Bi2Se3 nanoribbons grown by physical vapor deposition is studied as a function of the diameters and areal number density of the Au catalyst nanoparticles of mean diameters 8–150 nm formed by dewetting Au layers of thicknesses 1.5–16 nm. The highest yield of the Bi2Se3 nanoribbons is reached when synthesized on dewetted 3 nm thick Au layer (mean diameter of Au nanoparticles ~10 nm) and exceeds the nanoribbon yield obtained in catalyst-free synthesis by almost 50 times. The mean lengths and thicknesses of the Bi2Se3 nanoribbons are directly proportional to the mean diameters of Au catalyst nanoparticles. In contrast, the me…
Investigating the mechanical properties of GeSn nanowires.
2019
Germanium tin (GeSn) has been proposed as a promising material for electronic and optical applications due to the formation of a direct band-gap at a Sn content >7 at%. Furthermore, the ability to manipulate the properties of GeSn at the nanoscale will further permit the realisation of advanced mechanical devices. Here we report for the first time the mechanical properties of GeSn nanowires (7.1-9.7 at% Sn) and assess their suitability as nanoelectromechanical (NEM) switches. Electron microscopy analysis showed the nanowires to be single crystalline, with surfaces covered by a thin native amorphous oxide layer. Mechanical resonance and bending tests at different boundary conditions were use…
Space charge limited current mechanism in Bi2S3 nanowires
2016
We report on the charge transport properties of individual Bi2S3 nanowires grown within the pores of anodized aluminum oxide templates. The mean pore diameter was 80 nm. Space charge limited current is the dominating conduction mechanism at temperatures below 160 K. Characteristic parameters of nanowires, such as trap concentration and trap characteristic energy, were estimated from current-voltage characteristics at several temperatures.
Application of electrochemical impedance for characterising arrays of Bi2S3 nanowires
2015
Abstract Electrochemical Impedance Spectroscopy (EIS) was used to characterise the electrical properties of bismuth sulphide (Bi2S3) nanowires (NWs) templated within anodic aluminium oxide (AAO) membranes. A specially engineered cell, with a nominal electrolyte volume of 0.1–0.2 ml, was used to hold and measure the electrochemical impedance of the fragile NW/AAO samples. An equivalent circuit model was developed to determine the filling density of nanowires within the porous templates. The EIS method can be utilised to probe the nanowire filling density in porous membranes over large sample areas, which is often unobtainable using electron microscopy and conductive atomic force microscopy t…
Size Distribution, Mechanical and Electrical Properties of CuO Nanowires Grown by Modified Thermal Oxidation Methods
2020
Size distribution, Young&rsquo
Impedance and admittance characteristics of Bi2S3 nanowire arrays
2013
Current studies of the electrical impedance and admittance characteristics of the anodised aluminum oxide (AAO) nanoporous arrays and bismuth sulphide (Bi2S3) nanowire within AAO membranes are presented. The influence of potential and frequency scan rate effect produced on the real, imaginary and complex electrochemical impedance and double layer capacitance of the AAO nanopore and the Bi2S3 nanowire arrays were studied.
Relative Humidity Dependent Resistance Switching of Bi2S3Nanowires
2017
Electrical properties of Bi2S3nanowires grown using a single source precursor in anodic aluminum oxide templates are sensitive to the relative humidity in an inert gas environment. Dynamic sensing dependency is obtained and shows presence of spontaneous resistance switching effect between low and high relative humidity states. Employing the thermionic field emission theory, heights of Schottky barriers are estimated from the current-voltage characteristics and in relation to the humidity response. The change of Schottky barrier height is explained by local changes in physically adsorbed water molecules on the surface of the nanowire.
Author Correction: Induced unconventional superconductivity on the surface states of Bi2Te3 topological insulator
2018
Topological superconductivity is central to a variety of novel phenomena involving the interplay between topologically ordered phases and broken-symmetry states. The key ingredient is an unconventional order parameter, with an orbital component containing a chiral p x + ip y wave term. Here we present phase-sensitive measurements, based on the quantum interference in nanoscale Josephson junctions, realized by using Bi2Te3 topological insulator. We demonstrate that the induced superconductivity is unconventional and consistent with a sign-changing order parameter, such as a chiral p x + ip y component. The magnetic field pattern of the junctions shows a dip at zero externally applied magneti…
Induced unconventional superconductivity on the surface states of Bi2Te3 topological insulator
2017
Topological superconductivity is central to a variety of novel phenomena involving the interplay between topologically ordered phases and broken-symmetry states. The key ingredient is an unconventional order parameter, with an orbital component containing a chiral $p_x$ + i$p_y$ wave term. Here we present phase-sensitive measurements, based on the quantum interference in nanoscale Josephson junctions, realized by using Bi$_2$Te$_3$ topological insulator. We demonstrate that the induced superconductivity is unconventional and consistent with a sign-changing order parameter, such as a chiral $p_x$ + i$p_y$ component. The magnetic field pattern of the junctions shows a dip at zero externally a…
Magnetotransport Studies of Encapsulated Topological Insulator Bi2Se3 Nanoribbons
2022
This research was funded by the Latvian Council of Science, project “Highly tunable surface state transport in topological insulator nanoribbons”, No. lzp-2020/2-0343, and by the European Union’s Horizon 2020 research and innovation program, Grant Agreement No. 766714/ HiTIMe. Institute of Solid-State Physics, University of Latvia as the Center of Excellence has received funding from the European Union’s Horizon 2020 Framework Programme H2020-WIDESPREAD-01-2016-2017-TeamingPhase2 under grant agreement No. 739508, project CAMART2.
High transparency Bi 2 Se 3 topological insulator nanoribbon Josephson junctions with low resistive noise properties
2019
Bi$_2$Se$_3$ nanoribbons, grown by catalyst-free Physical Vapour Deposition, have been used to fabricate high quality Josephson junctions with Al superconducting electrodes. The conductance spectra (dI/dV) of the junctions show clear dip-peak structures characteristic of multiple Andreev reflections. The temperature dependence of the dip-peak features reveals a highly transparent Al/Bi$_2$Se$_3$ topological insulator nanoribbon interface and Josephson junction barrier. This is supported by the high values of the Bi$_2$Se$_3$ induced gap and of I$_c$R$_n$ (I$_c$ critical current, R$_n$ normal resistance of the junction) product both of the order of 160 $\mu$eV, a value close to the Al gap. T…