Surface Chemistry Directs the Tunable Assembly of TiO 2 Anatase Nanocubes into Three‐Dimensional Mesocrystals

2019

A Novel Approach Towards Carbon–Ru Electrodes with Mesoporosity for Supercapacitors

2007

Sponge biosilica formation involves syneresis following polycondensation in vivo.

2011

Syneresis is a process observed during the maturation/aging of silica gels obtained by sol-gel synthesis that results in shrinkage and expulsion of water due to a rearrangement and increase in the number of bridging siloxane bonds. Here we describe how the process of biosilica deposition during spicule ("biosilica" skeleton of the siliceous sponges) formation involves a phase of syneresis that occurs after the enzyme-mediated polycondensation reaction. Primmorphs from the demosponge Suberites domuncula were used to study syneresis and the inhibition of this mechanism. We showed by scanning electron microscopy that spicules added to primmorphs that have been incubated with manganese sulfate …

Facile hybridization of Ni@Fe2O3 superparticles with functionalized reduced graphene oxide and its application as anode material in lithium-ion batte…

2015

Abstract In our present work we developed a novel graphene wrapping approach of Ni@Fe2O3 superparticles, which can be extended as a concept approach for other nanomaterials as well. It uses sulfonated reduced graphene oxide, but avoids thermal treatments and use of toxic agents like hydrazine for its reduction. The modification of graphene oxide is achieved by the introduction of sulfate groups accompanied with reduction and elimination reactions, due to the treatment with oleum. The successful wrapping of nanoparticles is proven by energy dispersive X-ray spectroscopy, high-resolution transmission electron microscopy and Raman spectroscopy. The developed composite material shows strongly i…

Highly Loaded Semipermeable Nanocapsules for Magnetic Resonance Imaging.

2017

Magnetic resonance imaging has become an essential tool in medicine for the investigation of physiological processes. The key issues related to contrast agents, i.e., substances that are injected in the body for imaging, are the efficient enhancement of contrast, their low toxicity, and their defined biodistribution. Polyurea nanocapsules containing the gadolinium complex Gadobutrol as a contrast agent in high local concentration and high relaxivity up to 40 s-1 mmol-1 L are described. A high concentration of the contrast agent inside the nanocapsules can be ensured by increasing the crystallinity in the shell of the nanocapsules. Nanocapsules from aliphatic polyurea are found to display hi…

Water-dispersed semiconductor nanoplatelets with high fluorescence brightness, chemical and colloidal stability

2019

Quasi-two dimensional semiconductor nanoplatelets (NPLs) exhibit high spectral brightness and large absorption cross sections, making them promising for various applications including bioimaging. However, the synthesis of NPLs takes place in organic solvents, therefore they require phase transfer in order to use them in aqueous environments. The phase transfer of NPLs has so far been challenging with few examples in literature. This is likely due to the facile agglomeration of materials with plate-like geometries during the coating procedure. Here we demonstrate how to overcome agglomeration and transfer NPLs, individually coated with amphiphilic polymer chains, to aqueous phase. Upon one a…

Enzyme-accelerated and structure-guided crystallization of calcium carbonate: Role of the carbonic anhydrase in the homologous system

2014

Abstract The calcareous spicules from sponges, e.g. from Sycon raphanus, are composed of almost pure calcium carbonate. In order to elucidate the formation of those structural skeletal elements, the function of the enzyme carbonic anhydrase (CA), isolated from this species, during the in vitro calcium carbonate-based spicule formation, was investigated. It is shown that the recombinant sponge CA substantially accelerates calcium carbonate formation in the in vitro diffusion assay. A stoichiometric calculation revealed that the turnover rate of the sponge CA during the calcification process amounts to 25 CO2 s−1 × molecule CA−1. During this enzymatically driven process, initially pat-like pa…

Tetragonal tungsten bronzes Nb8−xW9+xO47−δ: optimization strategies and transport properties of a new n-type thermoelectric oxide

2015

Engineering of nanoscaled structures may help controlling the electrical and thermal transport in solids, in particular for thermoelectric applications that require the combination of low thermal conductivity and low electrical resistivity. The tetragonal tungsten bronzes Nb8−xW9+xO47 (TTB) allow a continuous variation of the charge carrier concentration while fulfilling at the same time the concept of a “phonon-glass electron-crystal” through a layered nanostructure defined by intrinsic crystallographic shear planes. The thermoelectric properties of the tetragonal tungsten bronzes Nb8−xW9+xO47−δ (0 < x < 2) were studied in the temperature range from 373 to 973 K. Structural defects and the…

Precursor Polymers for the Carbon Coating of Au@ZnO Multipods for Application as Active Material in Lithium-Ion Batteries

2014

The synthesis of statistical and block copolymers based on polyacrylonitrile, as a source for carbonaceous materials, and thiol-containing repeating units as inorganic nanoparticle anchoring groups is reported. These polymers are used to coat Au@ZnO multipod heteroparticles with polymer brushes. IR spectroscopy and transmission electron microscopy prove the successful binding of the polymer onto the inorganic nanostructures. Thermogravimetric analysis is applied to compare the binding ability of the block and statistical copolymers. Subsequently, the polymer coating is transformed into a carbonaceous (partially graphitic) coating by pyrolysis. The obtained carbon coating is characterized by…

Enlarging the Toolbox: Epoxide Termination of Polyferrocenylsilane (PFS) as a Key Step for the Synthesis of Amphiphilic PFS-Polyether Block Copolymer…

2022

Epoxide termination and functionalization of living poly(ferrocenyldimethylsilane) (PFDMS) is introduced by precapping the living PFDMS with a 4/2 molar mixture of 1,1-diphenylethylene and 1,1-dimethylsilacyclobutane acting as a “carbanion pump” system. Subsequent addition of allyl glycidyl ether (AGE) leads to quantitatively functionalized PFDMS–AGE polymers with molecular weights between 1500 and 15 400 g mol–1 and polydispersity indices ≤1.10, carrying one hydroxyl group and an additional allylic double bond. PFDMS–AGE was then applied as a macroinitiator for the living anionic ring-opening polymerization of ethylene oxide (EO) to generate amphiphilic and water-soluble poly(ferrocenyldim…

Metal Oxide/Polymer Hybrid Nanoparticles with Versatile Functionality Prepared by Controlled Surface Crystallization

2012

Metal oxide/polymer hybrids are prepared from polystyrene nanoparticles functionalized at the surface with phosphonate and phosphate groups. The polymer particles are synthesized with specifically designed surface-active monomers (surfmers) and used as nucleation surfaces for the controlled in situ crystallization of cerium, iron, and zinc oxide nanocrystals. The formation of the metal oxide is driven by the addition of a base to suspensions of the polymer particles containing the corresponding precursor. The crystal formation at the particle surface is studied for the different hybrid systems by X-ray diffraction and transmission electron microscopy (TEM). The potential catalytic activity …

Thermal stability and enhanced thermoelectric properties of the tetragonal tungsten bronzes Nb8-xW9+xO47 (0 &lt;x &lt;5)

2017

Thermoelectric materials are believed to play a fundamental role in the energy field over the next years thanks to their ability of directly converting heat into usable electric energy. To increase their integration in the commercial markets, improvements of the efficiencies are needed. At the same time, cheap and non-toxic materials are required along with easily upscalable production cycles. Compounds of the tetragonal tungsten bronze (TTB) series Nb8-xW9+xO47 fulfill all these requirements and are promising materials. Their adaptive structure ensures glass-like values of the thermal conductivity, and the substitution on the cation side allows a controlled manipulation of the electronic p…

Flexible minerals: self-assembled calcite spicules with extreme bending strength.

2013

Flexi-Fibers Glass or metal fibers can show incredible flexibility. Natalio et al. (p. 1298 ; see the Perspective by Sethmann ) used the protein silicatein-α, which is responsible for the biomineralization of silicates in sponges, to guide the formation of spicules made of calcite. These synthetic spicules could be bent to a high degree because of their inherent elasticity, whilst retaining the ability to guide light.

The inorganic polymer, polyphosphate, blocks binding of SARS-CoV-2 spike protein to ACE2 receptor at physiological concentrations

2020

Graphical abstract The inorganic physiological polymer, polyphosphate, blocks binding of SARS-CoV-2 spike protein to ACE2 receptor at physiological concentrations. This discovery proposes polyphosphate as a new member of the host's antiviral innate immune defense.

Spark Plasma Sintering (SPS)-Assisted Synthesis and Thermoelectric Characterization of Magnéli Phase V6O11

2018

The Magneli phase V6O11 was synthesized in gram amounts from a powder mixture of V6O11/V7O13 and vanadium metal, using the spark plasma sintering (SPS) technique. Its structure was determined with synchrotron X-ray powder diffraction data from a phase-pure sample synthesized by conventional solid-state synthesis. A special feature of Magneli-type oxides is a combination of crystallographic shear and intrinsic disorder that leads to relatively low lattice thermal conductivities. SPS prepared V6O11 has a relatively low thermal conductivity of κ = 2.72 ± 0.06 W (m K)-1 while being a n-type conductor with an electrical conductivity of σ = 0.039 ± 0.005 (μΩ m)-1, a Seebeck coefficient of α = -(3…

Two-Step Nucleation Process of Calcium Silicate Hydrate, the Nanobrick of Cement

2018

Despite a millennial history and the ubiquitous presence of cement in everyday life, the molecular processes underlying its hydration behavior, like the formation of calcium–silicate–hydrate (C–S–H), the binding phase of concrete, are mostly unexplored. Using time-resolved potentiometry and turbidimetry combined with dynamic light scattering, small-angle X-ray scattering, and cryo-TEM, we demonstrate C–S–H formation to proceed via a complex two-step pathway. In the first step, amorphous and dispersed spheroids are formed, whose composition is depleted in calcium compared to C–S–H and charge compensated with sodium. In the second step, these amorphous spheroids crystallize to tobermorite-typ…

A Zone-Casting Technique for Device Fabrication of Field-Effect Transistors Based on Discotic Hexa-peri-hexabenzocoronene

2005

Versatile preparation of silica nanocapsules for biomedical applications

2020

Core–shell nanocapsules are receiving increasing interest for drug delivery applications. Silica nanocapsules have been the focus of intensive studies due to their biocompatibility, versatile silica chemistry, and tunable porosity. However, a versatile one-step preparation of silica nanocapsules with well-defined core–shell structure, tunable size, flexible interior loading, and tailored shell composition, permeability, and surface functionalization for site-specific drug release and therapeutic tracking remains a challenge. Herein, an interfacially confined sol–gel process in miniemulsion for the one-step versatile preparation of functional silica nanocapsules is developed. Uniform nanocap…

ZnO-latex hybrids obtained by polymer-controlled crystallization: a spectroscopic investigation.

2007

Micro- and submicrosized ZnO-polymer hybrid materials were synthesized by precipitating zinc oxide from an aqueous medium in the presence of poly(styrene-acrylic acid) latex nanoparticles, prepared by miniemulsion polymerization. Up to 10 wt % of the latex becomes incorporated into the crystals. Although the long-range order of the inorganic material is essentially not altered by the polymer, studies by photoluminescence (PL) spectroscopy and electron paramagnetic resonance (EPR) show that the latex particles influence the optical and paramagnetic properties of the hybrids, which can be correlated with changes in the defect structure. Typical PL emission spectra showed a narrow UV peak and …

Nanomedicine: In Vivo Gene-Silencing in Fibrotic Liver by siRNA-Loaded Cationic Nanohydrogel Particles (Adv. Healthcare Mater. 18/2015)

2015

Precursor-Controlled Formation of Novel Carbon/Metal and Carbon/Metal Oxide Nanocomposites

2008

Carbonaceous materials have long been considered as a high-performance material due to their light weight, high thermal resistance, tunable porosity and strength, but also because of their exciting electronic properties. When hybridized with other metal nanoparticles to form carbon/ metal nanocomposites (CMCs), multifunctionality is achieved through the combination of carbon and metal, leading to interesting magnetic materials, catalysts, battery electrodes, or chemical sensors. Various methods for preparing CMCs have been developed. In most cases, metal cations deposited on carbonaceous materials were reduced chemically or physically to form CMCs. In these processes, heterogeneous dispersi…

Synthesis of Microporous Carbon Nanofibers and Nanotubes from Conjugated Polymer Network and Evaluation in Electrochemical Capacitor

2009

One-dimensional fibers and tubes are constructed through the oriented carbon-carbon cross-linking reactions towards rigid conjugated polymer networks. As the result, a template-free and one-step synthesis of CNTs and CNFs is achieved through a simple carbonization of the as-formed carbon-rich tubular and fiberlike polyphenylene precursors under argon. Microporous CNTs and CNFs with a surface area up to 900 m2 g–1 are obtained, together with HR-TEM characterizations indicating the formation of intrinsic microporous structure in these rigid carbon-rich networks. The primary electrochemical experiments reveal their promising applications as advanced electrodes in electrochemical double-layered…

A bio-orthogonal functionalization strategy for site-specific coupling of antibodies on vesicle surfaces after self-assembly

2019

Attaching targeting ligands on the surface of self-assembled drug delivery systems is the key request for a controlled transport of the drug to a desired location. Most commonly, the amphiphilic molecules (blockcopolymers, lipids etc.) are therefore pre-functionalized before the self-assembly takes place. However, this strategy cannot be applied, if it interferes with the self-assembly process, if the introduced functional groups react with loaded cargo or if natural carriers like extracellular vesicles should be functionalized. Here, we present the site-specific coupling of antibodies to the surface of amino group-terminated liposomes via bio-orthogonal copper-free click chemistry after li…

The Role of the Protein Corona in the Uptake Process of Nanoparticles

2018

Transformation of Amorphous Polyphosphate Nanoparticles into Coacervate Complexes: An Approach for the Encapsulation of Mesenchymal Stem Cells.

2018

Inorganic polyphosphate [polyP] has proven to be a promising physiological biopolymer for potential use in regenerative medicine because of its morphogenetic activity and function as an extracellular energy-donating system. Amorphous Ca2+ -polyP nanoparticles [Ca-polyP-NPs] are characterized by a high zeta potential with -34 mV (at pH 7.4). This should contribute to the stability of suspensions of the spherical nanoparticles (radius 94 nm), but make them less biocompatible. The zeta potential decreases to near zero after exposure of the Ca-polyP-NPs to protein/peptide-containing serum or medium plus serum. Electron microscopy analysis reveals that the particles rapidly change into a coacerv…

Ultrastrong composites from dopamine modified-polymer-infiltrated colloidal crystals

2015

Although strong and stiff synthetic composites have long been developed, the microstructure of today's most advanced composites has yet to achieve the sophisticated hierarchy of hybrid materials built up by living organisms. We have assembled hard and tough multilayered nanocomposites, which contain alternating layers of Fe3O4 nanoparticles and a 3-hydroxy-tyramine (dopamine) substituted polymer (dopamine modified polymer), strongly cemented together by chelation through infiltration of the polymer into the Fe3O4 mesocrystal. With a Young's modulus of 17 ± 3 GPa and a hardness of 1.3 ± 0.4 GPa the nanocomposite exhibits high resistance against elastic as well as plastic deformation. Key fea…

Nanofibrous photocatalysts from electrospun nanocapsules

2017

We present the design of multicompartment metal oxide/silica nanofibrous photocatalysts by colloid-electrospinning and subsequent calcination. During the calcination process, silica nanomaterials are cemented to form the fibrous framework and metal oxide precursors are crystallized inside and onto the fibers. This multicompartment nanofibrous structure, constructed with nanoparticles and core-shell nanocapsules, is therefore beneficial for the separation of the materials and the light utilization due to the multiple reflections and scattering of incident light in the cavities. The photocatalytic activity of the fibers was verified by the successful degradation of a model dye rhodamine B. Th…

Vitamin C Loaded Polyethylene: Synthesis and Properties of Precise Polyethylene with Vitamin C Defects via Acyclic Diene Metathesis Polycondensation

2020

A polyethylene-like polymer with an in-chain vitamin C group was synthesized by olefin metathesis polymerization. Here, we describe both the synthesis and a comprehensive physical characterization. Because of the olefin metathesis synthesis, the vitamin C groups are equidistantly arranged in the polyethylene (PE) main chain. Their separation was adjusted to 20 CH2 units. After hydrogenation, a semicrystalline polymer is obtained that is soluble in polar solvents. Because of its size and steric effect, the vitamin C acts as a chain defect, which is expelled from the crystal lattice, yielding a lamellar crystal with a homogeneous thickness corresponding to the interdefect distance. The physic…

Triple-target stimuli-responsive anti-COVID-19 face mask with physiological virus-inactivating agents

2021

Conventional face masks to prevent SARS-CoV-2 transmission are mostly based on a passive filtration principle. Ideally, anti-COVID-19 masks should protect the carrier not only by size exclusion of virus aerosol particles, but also be able to capture and destroy or inactivate the virus. Here we present the proof-of-concept of a filter mat for such a mask, which actively attracts aerosol droplets and kills the virus. The electrospun mats are made of polycaprolactone (PCL) a hydrophilic, functionalizable and biodegradable polyester, into which inorganic polyphosphate (polyP) a physiological biocompatible, biodegradable and antivirally active polymer (chain length, ∼40 Pi units) has been integr…

Organic-Inorganic Hybrids: Metal Oxide/Polymer Hybrid Nanoparticles with Versatile Functionality Prepared by Controlled Surface Crystallization (Adv.…

2013

Extraordinary Performance of Carbon‐Coated Anatase TiO 2 as Sodium‐Ion Anode

2015

The synthesis of in situ polymer‐functionalized anatase TiO2 particles using an anchoring block copolymer with hydroxamate as coordinating species is reported, which yields nanoparticles (≈11 nm) in multigram scale. Thermal annealing converts the polymer brushes into a uniform and homogeneous carbon coating as proven by high resolution transmission electron microscopy and Raman spectroscopy. The strong impact of particle size as well as carbon coating on the electrochemical performance of anatase TiO2 is demonstrated. Downsizing the particles leads to higher reversible uptake/release of sodium cations per formula unit TiO2 (e.g., 0.72 eq. Na+ (11 nm) vs only 0.56 eq. Na+ (40 nm)) while the …

Peptide-Controlled Assembly of Macroscopic Calcium Oxalate Nanosheets

2019

The fabrication of two-dimensional (2D) biomineral nanosheets is of high interest owing to their promise for applications in electronics, filtration, catalysis, and chemical sensing. Using a facile approach inspired by biomineralization in nature, we fabricate laterally macroscopic calcium oxalate nanosheets using β-folded peptides. The template peptides are composed of repetitive glutamic acid and leucine amino acids, self-organized at the air-water interface. Surface-specific sum frequency generation spectroscopy and molecular dynamics simulations reveal that the formation of oxalate nanosheets relies on the peptide-Ca 2+ ion interaction at the interface, which not only restructures the …

Controlling protein interactions in blood for effective liver immunosuppressive therapy by silica nanocapsules

2020

Immunosuppression with glucocorticoids is a common treatment for autoimmune liver diseases and after liver transplant, which is however associated with severe side-effects. Targeted delivery of glucocorticoids to inflammatory cells, e.g. liver macrophages and Kupffer cells, is a promising approach for minimizing side effects. Herein, we prepare core–shell silica nanocapsules (SiO2 NCs) via a sol–gel process confined in nanodroplets for targeted delivery of dexamethasone (DXM) for liver immunosuppressive therapy. DXM with concentrations up to 100 mg mL−1 in olive oil are encapsulated while encapsulation efficiency remains over 95% after 15 days. Internalization of NCs by non-parenchymal muri…

In Vivo Gene-Silencing in Fibrotic Liver by siRNA-Loaded Cationic Nanohydrogel Particles

2015

Cationic nanohydrogel particles loaded with anti-Col1α1 siRNA suppress collagen synthesis and deposition in fibrotic mice: Systemically administered 40 nm sized nanogel particles accumulate in collagen-expressing cells in the liver. Their siRNA payload induces a sequence specific in vivo gene knockdown affording an efficient antifibrotic effect in mice with liver fibrosis.

Inorganic polymeric phosphate/polyphosphate as an inducer of alkaline phosphatase and a modulator of intracellular Ca2+ level in osteoblasts (SaOS-2 …

2011

Inorganic polymeric phosphate is a physiological polymer that accumulates in bone cells. In the present study osteoblast-like SaOS-2 cells were exposed to this polymer, complexed in a 2:1 stoichiometric ratio with Ca(2+), polyP (Ca(2+) salt). At a concentration of 100 μM, polyP (Ca(2+) salt) caused a strong increase in the activity of the alkaline phosphatase and also an induction of the steady-state expression of the gene encoding this enzyme. Comparative experiments showed that polyP (Ca(2+) salt) can efficiently replace β-glycerophosphate in the in vitro hydroxyapatite (HA) biomineralization assay. In the presence of polyP (Ca(2+) salt) the cells extensively form HA crystallites, which r…

Surface-Functionalized Latex Particles as Controlling Agents for the Mineralization of Zinc Oxide in Aqueous Medium

2005

Polystyrene latex particles modified at the surface with different hydrophilic functional groups were prepared by miniemulsion polymerization and used as controlling agents in the crystallization of zinc oxide from aqueous medium. The effects of the chemical nature of the surface functionalization and the latex concentration on the crystal growth, morphology, and crystalline structure of the resulting zinc oxide were analyzed. Micro- and submicrosized crystals with a broad variety of morphologies depending on the functionalization were obtained. Among the different latexes studied, the acrylic-acid-derived particles were shown to be a convenient system for further quantitative investigation…

CeO2−x nanorods with intrinsic urease-like activity

2018

The large-scale production and ecotoxicity of urea make its removal from wastewater a health and environmental challenge. Whereas the industrial removal of urea relies on hydrolysis at elevated temperatures and high pressure, nature solves the urea disposal problem with the enzyme urease under ambient conditions. We show that CeO2−x nanorods (NRs) act as the first and efficient green urease mimic that catalyzes the hydrolysis of urea under ambient conditions with an activity (kcat = 9.58 × 101 s−1) about one order of magnitude lower than that of the native jack bean urease. The surface properties of CeO2−x NRs were probed by varying the Ce4+/Ce3+ ratio through La doping. Although La substit…

Merging models of biomineralisation with concepts of nonclassical crystallisation: is a liquid amorphous precursor involved in the formation of the p…

2012

16 pages; International audience; The calcitic prisms of Pinna nobilis (Pinnidae, Linnaeus 1758) are shown to be perfect examples of a mesocrystalline material. Based on their ultrastructure and on the occurrence of an amorphous transient precursor during the early stages of prism formation, we provide evidence for the pathway of mesocrystallisation proposed by Seto et al. (2012), which proceeds not by self-organized oriented attachment of crystalline nano-bricks but by aggregation of initially amorphous nanogranules which later transform by epitaxial nucleation to a threedimensional array of well aligned nanocrystals. We further fathom the role of a liquid amorphous calcium carbonate in bi…

Enhanced thermoelectric properties of the n-type Magnéli phase WO2.90: reduced thermal conductivity through microstructure engineering

2014

The thermoelectric properties of the Magneli phase WO2.90 were investigated, with special attention to how the thermoelectric performance can be altered by changing its microstructure. Spark plasma sintering (SPS) allowed the direct preparation of large amounts of consolidated material. Adding Ta2O5 to the reaction mixture lead to the formation of solid solutions W1−xTaxO2.90via a concurrent reaction between WO3 and Ta2O5 during the SPS treatment. In addition, micron-sized inclusions containing tungsten surrounded by WOx embedded in a WO2.90 matrix were formed, which act as additional scattering centers. As a result, the thermal conductivity of the Ta-containing samples was reduced by ≈30% …

Carbon-Coated Anatase TiO2Nanotubes for Li- and Na-Ion Anodes

2014

aInstitute of Physical Chemistry and MEET Battery Research Centre, University of Muenster, 48149 Muenster, Germany bHelmholtz-Institute Ulm (HIU), Electrochemistry I, 89081 Ulm, Germany cKarlsruher Institute of Technology (KIT), 76021 Karlsruhe, Germany dInstitute for Organic Chemistry, University of Mainz, 55128 Mainz, Germany eGraduate School Materials Science in Mainz, 55128 Mainz, Germany fInstitute for Inorganic and Analytical Chemistry, University of Mainz, 55128 Mainz, Germany gMax Planck Institute for Polymer Research, 55128 Mainz, Germany

One-Dimensional Porous Carbon/Platinum Composites for Nanoscale Electrodes

2007

Robust Two-Dimensional Electronic Properties in Three-Dimensional Microstructures of Rotationally Stacked Turbostratic Graphene

2017

We report on the electronic properties of turbostratic graphitic microdisks, rotationally stacked systems of graphene layers, where interlayer twisting leads to electronic decoupling resulting in charge-transport properties that retain the two dimensionality of graphene, despite the presence of a large number of layers. A key fingerprint of this reduced dimensionality is the effect of weak charge-carrier localization that we observe at low temperatures. The disks' resistivity measured as a function of magnetic field changes its shape from parabolic at room temperature to linear at a temperature of 2.7 K indicating further this type of two-dimensional transport. Compared to Bernal stacked gr…

Turbostratic graphitic microstructures: electronically decoupled multilayer graphene devices with robust high charge carrier mobility

2013

Carbon nanomaterials continue to amaze scientists due to their exceptional physical properties. Recently there have been theoretical predictions and first reports on graphene multilayers, where, due to the rotation of the stacked layers, outstanding electronic properties are retained while the susceptibility to degradation and mechanical stress is strongly reduced due to the multilayer nature. Here we show that fully turbostratic multilayer graphitic microstructures combine the high charge carrier mobilities necessary for advanced electronic and spintronic devices with the robustness of graphitic structures. Structural characterization of disk-shaped graphitic microstructures using Raman sp…