showing 80 related works from this author
Self-Assembled Monolayers: Bioinspired Catechol-Terminated Self-Assembled Monolayers with Enhanced Adhesion Properties (Small 8/2014)
2014
Linker depletion for missing cluster defects in non-UiO Metal-Organic Frameworks
2021
Defect engineering is a valuable tool to tune the properties of metal–organic frameworks. However, defect chemistry remains still predominantly limited to UiO-type MOFs. We describe the preferential formation of missing cluster defects in heterometallic titanium–organic frameworks of the MUV-10 family when synthesised in sub-stoichiometric linker conditions. Our results show the value of integrating experimental work, computational modelling and thorough characterization in rationalizing the impact of defects over the porosity and structure of this family of materials. Correlation of experiment with computational models reveals the dominance of missing cluster vacancies in the pore size dis…
Influence of alkylphosphonic acid grafting on the electronic and magnetic properties of La2/3Sr1/3MnO3 surfaces
2015
Self-assembled monolayers (SAMs) are highly promising materials for molecular engineering of electronic and spintronics devices thanks to their surface functionalization properties. In this direction, alkylphosphonic acids have been used to functionalize the most common ferromagnetic electrode in organic spintronics: La2/3Sr1/3MnO3 (LSMO). However, a study on the influence of SAMs grafting on LSMO electronic and magnetic properties is still missing. In this letter, we probe the influence of alkylphosphonic acids-based SAMs on the electronic and magnetic properties of the LSMO surface using different spectroscopies. We observe by X-ray photoemission and X-ray absorption that the grafting of …
Integrated Cleanroom Process for the Vapor-Phase Deposition of Large-Area Zeolitic Imidazolate Framework Thin Films
2019
Chemistry of materials XX(XX), acs.chemmater.9b03435 (2019). doi:10.1021/acs.chemmater.9b03435
Selective Implantation of Diamines for Cooperative Catalysis in Isoreticular Heterometallic Titanium–Organic Frameworks
2021
[EN] We introduce the first example of isoreticular titanium-organic frameworks, MUV-10 and MUV-12, to show how the different affinity of hard Ti(IV) and soft Ca(II) metal sites can be used to direct selective grafting of amines. This enables the combination of Lewis acid titanium centers and available -NH, sites in two sizeable pores for cooperative cycloaddition of CO2 to epoxides at room temperature and atmospheric pressure. The selective grafting of molecules to heterometallic clusters adds up to the pool of methodologies available for controlling the positioning and distribution of chemical functions in precise positions of the framework required for definitive control of pore chemistr…
Prussian blue@MoS2 layer composites as highly efficient cathodes for sodium- and potassium-ion batteries
2018
Prussian blue (PB) represents a simple, economical, and eco‐friendly system as cathode material for sodium‐ion batteries (SIBs). However, structural problems usually worsen its experimental performance thus motivating the search for alternative synthetic strategies and the formation of composites that compensate these deficiencies. Herein, a straightforward approach for the preparation of PB/MoS2‐based nanocomposites is presented. MoS2 provides a 2D active support for the homogeneous nucleation of porous PB nanocrystals, which feature superior surface areas than those obtained by other methodologies, giving rise to a compact PB shell covering the full flake. The nanocomposite exhibits an ex…
Self-Assembled Monolayer-Functionalized Half-Metallic Manganite for Molecular Spintronics
2012
(La,Sr)MnO(3) manganite (LSMO) has emerged as the standard ferromagnetic electrode in organic spintronic devices due to its highly spin-polarized character and air stability. Whereas organic semiconductors and polymers have been mainly envisaged to propagate spin information, self-assembled monolayers (SAMs) have been overlooked and should be considered as promising materials for molecular engineering of spintronic devices. Surprisingly, up to now the first key step of SAM grafting protocols over LSMO surface thin films is still missing. We report the grafting of dodecyl (C12P) and octadecyl (C18P) phosphonic acids over the LSMO half-metallic oxide. Alkylphosphonic acids form ordered self-a…
Effect of Metal Complexation on the Conductance of Single-Molecular Wires Measured at Room Temperature
2014
The present work aims to give insight into the effect that metal coordination has on the room-temperature conductance of molecular wires. For that purpose, we have designed a family of rigid, highly conductive ligands functionalized with different terminations (acetylthiols, pyridines, and ethynyl groups), in which the conformational changes induced by metal coordination are negligible. The single-molecule conductance features of this series of molecular wires and their corresponding Cu(I) complexes have been measured in break-junction setups at room temperature. Experimental and theoretical data show that no matter the anchoring group, in all cases metal coordination leads to a shift towar…
Cover Picture: Nanoscale Deposition of Single-Molecule Magnets onto SiO2 Patterns (Adv. Mater. 2/2007)
2007
The cover shows a schematic of scanning probe nanolithography based on the spatial confinement of an oxidation reaction within a water meniscus, and its application for fabricating ordered arrays of cationic Mn12 single-molecule magnets. Romero, Coronado, Garcia, and co-workers report on p. 291 that electrostatic interactions between the molecules and trapped charges within the nanodots drive the positioning of the molecules at the nanoscale.
Effect of linker distribution in the photocatalytic activity of multivariate mesoporous crystals
2021
The use of Metal-Organic Frameworks as crystalline matrices for the synthesis of multiple component or multivariate solids by the combination of different linkers into a single material has emerged as a versatile route to tailor the properties of single-component phases or even access new functions. This approach is particularly relevant for Zr6-MOFs due to the synthetic flexibility of this inorganic node. However, the majority of materials are isolated as polycrystalline solids, which are not ideal to decipher the spatial arrangement of parent and exchanged linkers for the formation of homogeneous structures or heterogeneous domains across the solid. Here we use high-throughput methodologi…
Correction: Effect of nanostructuration on the spin crossover transition in crystalline ultrathin films
2019
Correction for ‘Effect of nanostructuration on the spin crossover transition in crystalline ultrathin films’ by Víctor Rubio-Giménez et al., Chem. Sci., 2019, DOI: 10.1039/c8sc04935a.
Synthesis, structure and physical characterization of the dimer {[(bpy)2Co]2(TPOA)}4+ (bpy=2,2′-dipyridyl; H2TPOA=N,N′,N′′,N′′′-tetraphenyl oxalamidi…
2008
Abstract The reaction between CoCl 2 , 2,2′-dipyridyl (bpy) and N , N ′, N ′′, N ′′′-tetraphenyl oxalamidine (H 2 TPOA) in a water/ethanol mixture yields the {[(bpy) 2 Co] 2 (TPOA)} 2+ dimer, that is immediately oxidized in aerobic conditions leading to the Co III species {[(bpy) 2 Co] 2 (TPOA)} 4+ . This cation was isolated as the {[(bpy) 2 Co] 2 (TPOA)}(PF6) 4 ( 1 ) salt, that was characterized by X-ray diffraction on single crystals. The dimer is formed by two Co III ions in octahedral coordination bridged by a deprotonated μ 2 -TPOA ligand. The Co III ions appear in its low spin configuration. Thus, the dimers are essentially diamagnetic, as shown by 1 H NMR and magnetic measurements.
Nanoscale Deposition of Single-Molecule Magnets onto SiO2 Patterns
2007
bet on a silicon oxide template while the rest ofthe macroscopic surface remains free of molecules. Local oxi-dation was used to fabricate silicon oxide nanopatterns, eitherdots or stripes, over a Si (100) surface coated with a SAM.Their width ranged from 30 to 500 nm whereas the lengthcould be modified from a few nanometers up to several mi-crometers. Nanoscale direct assembly arose from a combina-tion of three factors: i) the strength of the attractive electro-static interactions between the molecules and the local oxides;ii) the weak repulsive interaction between the molecules andthe unpatternedsurface; and iii) the size of the nanopattern.Local oxidation nanolithography (LON) allows the…
Magnetic molecular nanostructures: Design of magnetic molecular materials as monolayers, multilayers and thin films
2007
In this paper we summarize the importance and versatility of the molecular approach in the design and development of novel magnetic molecular materials. These materials processing, in order to obtain controlled molecular structures at the nanoscale, will also be remarked.
WS2/MoS2 Heterostructures via Thermal Treatment of MoS2 Layers Electrostatically Functionalized with W3S4 Molecular Clusters
2020
The preparation of 2D stacked layers that combine flakes of different nature, gives rise to countless number of heterostructures where new band alignments, defined at the interfaces, control the electronic properties of the system. Among the large family of 2D/2D heterostructures, the one formed by the combination of the most common semiconducting transition metal dichalcogenides WS2/MoS2, has awaken great interest due to its photovoltaic and photoelectrochemical properties. Solution as well as dry physical methods have been developed to optimize the synthesis of these heterostructures. Here a suspension of negatively charged MoS2 flakes is mixed with a methanolic solution of a cationic W3S…
ChemInform Abstract: Catenanes and Threaded Systems: From Solution to Surfaces
2009
Functional catenanes and threaded systems able to perform controllable mechanical motions are ideally suited for the design of molecular devices displaying mechanical, electronic, information or sensing functions. These systems have been extensively studied in solution phase and numerous examples of stimuli-driven molecular shuttles have been reported. However, for fully developing their potential applications, they must be interfaced with the macroscopic world. To achieve this objective, in the last few years catenanes and rotaxanes have been organized over surfaces in the form of chemisorbed monolayers or physisorbed monolayers, multilayers and thin films. This tutorial review summarizes …
Illustrating the processability of magnetic layered double hydroxides: layer-by-layer assembly of magnetic ultrathin films.
2013
We report the preparation of single-layer layered double hydroxide (LDH) two-dimensional (2D) nanosheets by exfoliation of highly crystalline NiAl-NO3 LDH. Next, these unilamellar moieties have been incorporated layer-by-layer (LbL) into a poly(sodium 4-styrenesulfonate)/LDH nanosheet multilayer ultrathin film (UTF). Fourier transform infrared spectroscopy (FT-IR), ultraviolet-visible light (UV-vis), and X-ray diffraction (XRD) profiles have been used to follow the uniform growth of the UTF. The use of a magnetic LDH as the cationic component of the multilayered architecture enables study of the resulting magnetic properties of the UTFs. Our magnetic data show the appearance of spontaneous …
Optical mercury sensing using a benzothiazolium hemicyanine dye.
2006
[structure: see text] The selectivity and sensitivity of a benzothiazolium hemicyanine dye toward mercury(II) in aqueous solutions are described. Mercury ions coordinate to the dye forming a 1:1 complex. This interaction induces a color change in the dye at micromolar concentrations of mercury. Furthermore, the color change and quenching of the dye emission are selective for mercury when compared with other ions such as lead(II), cadmium(II), zinc(II), or iron(II).
Self-Assembly of a Copper(II)-Based Metallosupramolecular Hexagon
2008
The self-assembly of a 1:1 mixture of copper(II) ions and a rigid heteroditopic ligand L containing phen and terpy binding units gives rise in the solid state to green crystals of a hexanuclear metallamacrocycle 1. X-ray crystallography reveals that 1 consists of molecular hexagons of the grid-type family in which each metal ion is bound to two different ligands through the phen and terpy units, plus a weakly coordinated PF6 (-) anion in a highly distorted octahedral geometry. ES-MS studies of acetonitrile solutions of L and copper(II) in a 1:1 ratio show mixtures of polynuclear complexes in which trinuclear L3Cu3 species are predominant.
Smart molecular/MoS2 Heterostructures Featuring Light and Thermally-Induced Strain Driven by Spin Switching
2020
In this work we exploit the ability of spin-crossover molecules to switch between two spin states, upon the application of external stimuli, to prepare smart molecular/2D heterostructures. Through the chemical design of the hybrid interface, that involves a covalent grafting between the two components, we obtain a hybrid heterostructure formed by spin-crossover nanoparticles anchored on chemically functionalized monolayers of semiconducting MoS2. In the resulting hybrid, the strain generated by the molecular system over the MoS2 layer, as a consequence of a thermal or light-induced spin switching, results in a dramatic and reversible change of its electrical and optical properties. This nov…
Imidazolate bridged Cu(II)-Cu(II) and Cu(II)-Zn(II) complexes of a terpyridinophane azamacrocycle: a solution and solid state study.
2007
The dinuclear Cu2+ and Zn2+ as well as the mixed Cu2+-Zn2+ complexes of a 5,5''-pentaazaterpyridinophane ligand (L) are able to incorporate imidazolate (Im-) as a bridging ligand. The crystal structure of [Cu(2)L(Im)(Br)(H2O)](CF(3)SO(3))(2).3H2O (1) shows one copper coordinated by the three pyridine nitrogens of the terpyridine unit, one nitrogen of the imidazolate bridge (Im-) and one bromide anion occupying the axial position of a distorted square pyramid. The second copper atom is coordinated by the remaining imidazolate nitrogen, the three secondary nitrogens at the centre of the polyamine bridge and one water molecule that occupies the axial position. Magnetic measurements have been p…
Inorganic Materials and Ionic Liquids: Large-scale Nanopatterning of Single Proteins used as Carriers of Magnetic Nanoparticles (Adv. Mater. 5/2010)
2010
Synthesis of a novel ditopic ligand incorporating directly bonded 1,10-phenanthroline and 2,2′:6′,2″-terpyridine units
2006
Abstract The synthesis of a rigid ditopic ligand incorporating a 1,10-phenanthroline directly connected through its 3-position to the 5-position of a 2,2′:6′,2″-terpyridine is described. The synthesis is based on a series of palladium(0)-catalyzed cross-coupling reactions (Stille and Suzuki couplings) starting from 1,10-phenanthroline and bromo-substituted pyridines.
Effect of modulator connectivity on promoting defectivity in titanium–organic frameworks
2020
The recognition of defect chemistry as a true synthetic tool for targeted creation of defects and controllable performance remains limited by the pool of frameworks explored. The value of defect engineering in controlling the properties of defective frameworks has been beautifully exemplified and largely demonstrated with UiO-type materials based on Zr(iv) nodes. However, titanium–organic frameworks remain largely unexplored in this context arguably due to the complex chemistry in solution of Ti(iv) and the difficulties in growing crystalline solids. We report a systematic study on the ability of mono- and dicarboxylic modulators (benzoic and isophthalic acid) to promote defect creation in …
Electrical conductivity and magnetic bistability in metal–organic frameworks and coordination polymers: charge transport and spin crossover at the na…
2020
Materials scientists are currently shifting from purely inorganic, organic and silicon-based materials towards hybrid organic–inorganic materials to develop increasingly complex and powerful electronic devices. In this context, it is undeniable that conductive metal–organic frameworks (MOFs) and bistable coordination polymers (CPs) are carving a niche for themselves in the electronics world. The tunability and processability of these materials alongside the combination of electrical conductivity with porosity or spin transition offers unprecedented technological opportunities for their integration into functional devices. This review aims to summarise the chemical strategies tha…
Surfactant-assisted synthesis of titanium nanoMOFs for thin film fabrication
2021
We use dodecanoic acid as a modulator to yield titanium MOF nanoparticles with good control of size and colloid stability and minimum impact to the properties of the framework to enable direct fabrication of crystalline, porous thin films. ispartof: CHEMICAL COMMUNICATIONS vol:57 issue:72 pages:9040-9043 ispartof: location:England status: published
CO 2 Fixation and Activation by Cu II Complexes of 5,5″‐Terpyridinophane Macrocycles
2007
An aza-terpyridinophane receptor containing the polyamine 4,7,10,13-tetraazahexadecane-1,16-diamine linked through methylene groups to the 5,5″ positions of a terpyridine unit has been prepared and characterized (L). The acid-base behaviour, CuII speciation and ability to form ternary complexes (CuII-L-carbonate) have been explored by potentiometric titrations in 0.15 M NaClO4 and by UV/Vis and paramagnetic NMR spectroscopy. Comparisons are made with a previously reported terpyridinophane containing the polyamine 4,7,10-triazatridecane-1,13-diamine (L1). For this latter receptor, reductive coupling between indigo and carbon dioxide at indigo-modified electrodes produces carboxylated derivat…
Innentitelbild: Selective Implantation of Diamines for Cooperative Catalysis in Isoreticular Heterometallic Titanium–Organic Frameworks (Angew. Chem.…
2021
Spinterface: Crafting spintronics at the molecular scale
2014
A number of studies have suggested that molecular materials could offer similar performance as, or even potentially supersede, those of inorganic materials in spintronics devices. Radically new spintronics functionalities, unavailable with conventional inorganic materials, could stem from the interface between ferromagnetic (FM) and molecular materials, giving rise to the so-called “spinterface” field. In this article, we review the fundamental concepts, recent experiments, and perspectives in this fast rising field, where the functionality is brought from the bulk to the ultimate downscaled device: the interface. The article shows how spin-dependent hybridization at the FM metal/molecule i…
Inside Cover: Selective Implantation of Diamines for Cooperative Catalysis in Isoreticular Heterometallic Titanium–Organic Frameworks (Angew. Chem. I…
2021
Bioinspired catechol-terminated self-assembled monolayers with enhanced adhesion properties
2013
The role of the catechol moiety in the adhesive properties of mussel proteins and related synthetic materials has been extensively studied in the last years but still remains elusive. Here, a simplified model approach is presented based on a self-assembled monolayer (SAM) of upward-facing catechols thiol-bound to epitaxial gold substrates. The orientation of the catechol moieties is confirmed by spectroscopy, which also showed lack of significant amounts of interfering o-quinones. Local force-distance curves on the SAM measured by atomic force microscopy (AFM) shows an average adhesion force of 45 nN, stronger than that of a reference polydopamine coating, along with higher reproducibility …
Deep-Red-Emitting Electrochemical Cells Based on Heteroleptic Bis-chelated Ruthenium(II) Complexes
2009
Two ruthenium(II)-based complexes were prepared that show intense deep-red light emission at room temperature. Solid-state electroluminescent devices were prepared using one of the ruthenium complexes as the only active component. These devices emit deep-red light at low voltages and exhibit extraordinary stabilities, demonstrating their potential for low-cost deep-red light sources.
Heterometallic Titanium–Organic Frameworks by Metal-Induced Dynamic Topological Transformations
2020
Reticular chemistry has boosted the design of thousands of metal and covalent organic frameworks for unlimited chemical compositions, structures, and sizable porosities. The ability to generate porous materials at will on the basis of geometrical design concepts is responsible for the rapid growth of the field and the increasing number of applications derived. Despite their promising features, the synthesis of targeted homo- and heterometallic titanium–organic frameworks amenable to these principles is relentlessly limited by the high reactivity of this metal in solution that impedes the controlled assembly of titanium molecular clusters. We describe an unprecedented methodology for the syn…
Heterometallic Titanium-Organic Frameworks as Dual Metal Catalysts for Synergistic Non-Buffered Hydrolysis of Nerve Agent Simulants
2020
Heterometallic metal-organic frameworks (MOFs) can offer important advantages over their homometallic counterparts to enable targeted modification of their adsorption, structural response, electronic structure, or chemical reactivity. However, controlling metal distribution in these solids still remains a challenge. The family of mesoporous titanium-organic frameworks, MUV-101(M), displays heterometallic TiM2 nodes assembled from direct reaction of Ti(IV) and M(II) salts. We use the degradation of nerve agent simulants to demonstrate that only TiFe2 nodes are capable of catalytic degradation in non-buffered conditions. By using an integrative experimental-computational approach, we rational…
Reinforced Room-Temperature Spin Filtering in Chiral Paramagnetic Metallopeptides
2020
Chirality-induced spin selectivity (CISS), whereby helical molecules polarize the spin of electrical current, is an intriguing effect with potential applications in nanospintronics. In this nascent field, the study of the CISS effect using paramagnetic chiral molecules, which could introduce another degree of freedom in controlling the spin transport, remains so far unexplored. To address this challenge, herein we propose the use of self-assembled monolayers (SAMs) of helical lanthanide-binding peptides. To elucidate the effect of the paramagnetic nuclei, monolayers of the peptide coordinating paramagnetic or diamagnetic ions are prepared. By means of spin-dependent electrochemistry, the CI…
Path to Overcome Material and Fundamental Obstacles in Spin Valves Based on MoS2 and Other Transition-Metal Dichalcogenides
2019
The recent introduction of two-dimensional materials into magnetic tunnel junctions (2D MTJs) offers very promising properties for spintronics, such as atomically defined interfaces, spin filtering, perpendicular anisotropy, and modulation of spin-orbit torque. Nevertheless, the difficulty of integrating exfoliated 2D materials into spintronic devices has limited exploration. Here the authors find a fabrication process leading to superior performance in MTJs based on transition-metal dichalcogenides, and further suggest a path to alleviate basic issues of technology and physics for 2D MTJs.
Tetrazine Linkers as Plug‐and‐Play Tags for General Metal‐Organic Framework Functionalization and C 60 Conjugation
2022
WS 2 /MoS 2 Heterostructures through Thermal Treatment of MoS 2 Layers Electrostatically Functionalized with W 3 S 4 Molecular Clusters
2020
The preparation of 2D stacked layers combining flakes of different nature gives rise to countless numbers of heterostructures where new band alignments, defined at the interfaces, control the electronic properties of the system. Among the large family of 2D/2D heterostructures, the one formed by the combination of the most common semiconducting transition metal dichalcogenides, WS2 /MoS2 , has awakened great interest owing to its photovoltaic and photoelectrochemical properties. Solution as well as dry physical methods have been developed to optimize the synthesis of these heterostructures. Here, a suspension of negatively charged MoS2 flakes is mixed with a methanolic solution of a cationi…
Effect of nanostructuration on the spin crossover transition in crystalline ultrathin films† †Electronic supplementary information (ESI) available: M…
2019
Film thickness and microstructure critically affect the spin crossover transition of a 2D coordination polymer.
Fast Pirouetting Motion in a Pyridine Bisamine-Containing Copper-Complexed Rotaxane
2013
The present work reports the introduction of pyridine bisamine terdentate ligands in the structure of a pirouetting copper rotaxane. Rotaxane 2[PF6] constitutes the first example of the incorporation of imine-based dynamic covalent chemistry in the synthesis of switchable copper-complexed interlocked systems. In this rotaxane, the substitution of the classical terpyridine terdentate unit by a pyridine bisamine moiety has led to a significant stabilization of the pentacoordinated site. That fact has been evidenced by EPR spectroscopy and cyclic voltammetry. Regarding the tetracoordinated site, the congestion around the coordination sphere has been reduced to accelerate the typically slow reo…
High-Quality Metal–Organic Framework Ultrathin Films for Electronically Active Interfaces
2016
Currently available methodologies arguably lack the exquisite control required for producing metal-organic framework (MOF) thin films of sufficient quality for electronic applications. By directing MOF transfer with self-assembled monolayers (SAMs), we achieve very smooth, homogeneous, highly oriented, ultrathin films across millimeter-scale areas that display moderate conductivity likely due to electron hopping. Here, the SAM is key for directing the transfer thereby enlarging the number and nature of the substrates of choice. We have exploited this versatility to evolve from deposition onto standard Si and Au to nonconventional substrates such as ferromagnetic Permalloy. We believe that t…
Spontaneous growth of 2D coordination polymers on functionalized ferromagnetic surfaces
2018
2D coordination polymers grow spontaneously on reactive surfaces due to surface oxidation. The growth process is observed in real time.
Self-assembly of an iron(ii)-based M5L6 metallosupramolecular cage
2011
A pentanuclear M(5)L(6) coordination cage is self-assembled in solution from a rigid linear heteroditopic phen-tpy ligand and an iron (II) salt.
Catenanes and threaded systems: from solution to surfaces
2009
Functional catenanes and threaded systems able to perform controllable mechanical motions are ideally suited for the design of molecular devices displaying mechanical, electronic, information or sensing functions. These systems have been extensively studied in solution phase and numerous examples of stimuli-driven molecular shuttles have been reported. However, for fully developing their potential applications, they must be interfaced with the macroscopic world. To achieve this objective, in the last few years catenanes and rotaxanes have been organized over surfaces in the form of chemisorbed monolayers or physisorbed monolayers, multilayers and thin films. This tutorial review summarizes …
Epitaxial Thin-Film vs Single Crystal Growth of 2D Hofmann-Type Iron(II) Materials: A Comparative Assessment of their Bi-Stable Spin Crossover Proper…
2020
Integration of the ON-OFF cooperative spin crossover (SCO) properties of FeII coordination polymers as components of electronic and/or spintronic devices is currently an area of great interest for potential applications. This requires the selection and growth of thin films of the appropriate material onto selected substrates. In this context, two new series of cooperative SCO two-dimensional FeII coordination polymers of the Hofmann-type formulated {FeII(Pym)2[MII(CN)4]·xH2O}n and {FeII(Isoq)2[MII(CN)4]}n (Pym = pyrimidine, Isoq = isoquinoline; MII = Ni, Pd, Pt) have been synthesized, characterized, and the corresponding Pt derivatives selected for fabrication of thin films by liquid-phase …
Ultrathin Films of 2D Hofmann-Type Coordination Polymers: Influence of Pillaring Linkers on Structural Flexibility and Vertical Charge Transport
2019
Searching for novel materials and controlling their nanostructuration into electronic devices is a challenging task ahead of chemists and chemical engineers. Even more so when this new application requires an exquisite control over the morphology, crystallinity, roughness and orientation of the films produced. In this context, it is of critical importance to analyze the influence of the chemical composition of perspective materials on their properties at the nanoscale. We report the fabrication of ultrathin films (thickness < 30 nm) of a family of FeII Hofmann-like coordination polymers by using an optimized liquid phase epitaxy (LPE) set-up. The series [Fe(L)2{Pt(CN)4}] (L = pyridine, pyri…
Surface functionalization of metal-organic frameworks for improved moisture resistance
2018
Metal-organic frameworks (MOFs) are a class of porous inorganic materials with promising properties in gas storage and separation, catalysis and sensing. However, the main issue limiting their applicability is their poor stability in humid conditions. The common methods to overcome this problem involve the formation of strong metal-linker bonds by using highly charged metals, which is limited to a number of structures, the introduction of alkylic groups to the framework by post-synthetic modification (PSM) or chemical vapour deposition (CVD) to enhance overall hydrophobicity of the framework. These last two usually provoke a drastic reduction of the porosity of the material. These strategie…
Direct Visualization of Pyrrole Reactivity upon Confinement within a Cyclodextrin Metal–Organic Framework
2019
Metal–organic frameworks can be used as porous templates to exert control over polymerization reactions. Shown here are the possibilities offered by these crystalline, porous nanoreactors to capture highly-reactive intermediates for a better understanding of the mechanism of polymerization reactions. By using a cyclodextrin framework the polymerization of pyrrole is restricted, capturing the formation of terpyrrole cationic intermediates. Single-crystal X-ray diffraction is used to provide definite information on the supramolecular interactions that induce the formation and stabilization of a conductive array of cationic complexes.
Synthesis and properties of dinuclear Ru(II)/Os(II) complexes based on a heteroditopic phenanthroline-terpyridine bridging ligand.
2010
The synthesis and characterization of a series of mono- and dinuclear ruthenium(II) and osmium(II) polypyridyl complexes based on the heteroditopic bridging ligand PT are reported. This ligand incorporates bidentate phen (1,10-phenanthroline) and terdentate tpy (2,2':6',2''-terpyridine) units directly connected by their 3 and 5 positions, respectively. The dinuclear complexes have been synthesized via a Pd(0) catalyzed cross-coupling reaction between a bromo-substituted Ru-phen complex and a tpy derivative incorporating a boronate ester, followed by Ru(II) or Os(II) complexation. The compounds obtained are fully characterized using spectroscopic and electrochemical measurements. The electro…
Fast redox-triggered shuttling motions in a copper rotaxane based on a phenanthroline–terpyridine conjugate
2014
Fast shuttling motions in solution have been observed by cyclic voltammetry in a Cu(I/II)-based [2] rotaxane. In the reported system, the different coordination preferences of both copper oxidation states are exploited to promote the electrochemically-triggered gliding of the ring from a tetra to a pentacoordinated site and vice versa. The thread of this rotaxane consists of a tridentate 2,2':6',2''-terpyridine chelating unit directly bonded through its 5-position to the 3-position of the bidentate 1,10-phenanthroline unit. This distribution reduces to a minimum the distance between the two coordination sites and lessens the congestion around the tetrahedral environment. These two factors h…
Synthesis of brominated tetrathiafulvalenes via phosphite-mediated cross-coupling
2010
The synthesis of polybrominated tetrathiafulvalenes (TTF-Brn, 2-4) containing 2-4 bromine atoms via phosphite-mediated cross-coupling of bromo-substituted 1,3-dithiole-2-thiones and 1,3-dithiole-2-ones is reported. © 2010 Elsevier B.V.
Self-assembled monolayers on a ferromagnetic permalloy surface.
2015
Self-assembled monolayers (SAMs) are nowadays broadly used as surface protectors or modifiers and play a key role in many technological applications. This has motivated the study of their formation in all kind of materials; however, and despite the current interest in molecular spintronics, the study of SAMs on ferromagnetic surfaces remains almost unexplored. In this paper, we report for the first time a methodology for the formation of SAMs of n-alkylphosphonic acids on permalloy in ambient conditions. The formed monolayers have been fully characterized by means of contact angle measurements, atomic force microscopy, X-ray photoelectron spectroscopy, matrix assisted laser desorption ioniz…
Self-assembled monolayers based spintronics: from ferromagnetic surface functionalization to spin-dependent transport.
2016
Chemically functionalized surfaces are studied for a wide range of applications going from medicine to electronics. Whereas non-magnetic surfaces have been widely studied, functionalization of magnetic surfaces is much less common and has almost never been used for spintronics applications. In this article we present the functionalization of La2/3Sr1/3MnO3, a ferromagnetic oxide, with self-assembled monolayers for spintronics. La2/3Sr1/3MnO3 is the prototypical half-metallic manganite used in spintronics studies. First, we show that La2/3Sr1/3MnO3 can be functionalized by alkylphosphonic acid molecules. We then emphasize the use of these functionalized surfaces in spintronics devices such a…
Origin of the Chemiresistive Response of Ultrathin Films of Conductive Metal–Organic Frameworks
2018
Conductive metal-organic frameworks are opening new perspectives for the use of these porous materials for applications traditionally limited to more classical inorganic materials, such as their integration into electronic devices. This has enabled the development of chemiresistive sensors capable of transducing the presence of specific guests into an electrical response with good selectivity and sensitivity. By combining experimental data with computational modelling, a possible origin for the underlying mechanism of this phenomenon in ultrathin films (ca. 30 nm) of Cu-CAT-1 is described. ispartof: ANGEWANDTE CHEMIE-INTERNATIONAL EDITION vol:57 issue:46 pages:15086-15090 ispartof: location…
Surface Functionalization of Metal–Organic Framework Crystals with Catechol Coatings for Enhanced Moisture Tolerance
2021
Robust catechol coatings for enhanced moisture tolerance were produced in one step by direct reaction of Hong Kong University of Science and Technology (HKUST) with synthetic catechols. We ascribe the rapid formation of homogeneous coatings around the metal–organic framework particles to the biomimetic catalytic activity of Cu(II) dimers in the external surface of the crystals. Use of fluorinated catechols results in hydrophobic, permeable coatings that protect HKUST from water degradation while retaining close to 100% of its original sorption capacity.
Bottom‐Up Fabrication of Semiconductive Metal-Organic Framework Ultrathin Films
2018
Though generally considered insulating, recent progress on the discovery of conductive porous metal-organic frameworks (MOFs) offers new opportunities for their integration as electroactive components in electronic devices. Compared to classical semiconductors, these metal-organic hybrids combine the crystallinity of inorganic materials with easier chemical functionalization and processability. Still, future development depends on the ability to produce high-quality films with fine control over their orientation, crystallinity, homogeneity, and thickness. Here self-assembled monolayer substrate modification and bottom-up techniques are used to produce preferentially oriented, ultrathin, con…
Large-scale Nanopatterning of Single Proteins used as Carriers of Magnetic Nanoparticles
2010
4 páginas, 4 figuras.
Photophysical Properties of Oligo(phenylene ethynylene) Iridium(III) Complexes Functionalized with Metal-Anchoring Groups
2016
[EN] The electrochemical and photophysical properties of a family of conjugated ligands and their iridium(III) cyclometallated complexes are described. They consist of a series of monocationic Ir-III bis-2-phenylpyridine complexes with p-phenylethynyl-1,10-phenanthroline ligands of different length. The structure of these ligands includes terminal acetylthiol or pyridine groups, which can provide good electrical contacts between metal electrodes. Cyclic voltammetry, absorption and emission spectroscopy, laser flash photolysis and density functional theory calculations reveal that the high conjugation of the diimine ligand affords small energy gaps between the frontier orbitals. Nevertheless…
Metal Node Control of Brønsted Acidity in Heterobimetallic Titanium–Organic Frameworks
2023
Compared to indirect framework modification, synthetic control of cluster composition can be used to gain direct access to catalytic activities exclusive of specific metal combinations. We demonstrate this concept by testing the aminolysis of epoxides with a family of isostructural mesoporous frameworks featuring five combinations of homometallic and heterobimetallic metal-oxo trimers (Fe3, Ti3, TiFe2, TiCo2, and TiNi2). Only TiFe2 nodes display activities comparable to benchmark catalysts based on grafting of strong acids, which here originate from the combination of Lewis Ti4+ and Brønsted Fe3+–OH acid sites. The applicability of MUV-101(Fe) to the synthesis of β-amino a…
Wide range local resistance imaging on fragile materials by conducting probe atomic force microscopy in intermittent contact mode
2016
International audience; An imaging technique associating a slowly intermittent contact mode of atomic force microscopy (AFM) with a home-made multi-purpose resistance sensing device is presented. It aims at extending the widespread resistance measurements classically operated in contact mode AFM to broaden their application fields to soft materials (molecular electronics, biology) and fragile or weakly anchored nano-objects, for which nanoscale electrical characterization is highly demanded and often proves to be a challenging task in contact mode. Compared with the state of the art concerning less aggressive solutions for AFM electrical imaging, our technique brings a significantly wider r…
Spin-crossover nanoparticles anchored on MoS2 layers for heterostructures with tunable strain driven by thermal or light-induced spin switching
2021
In the past few years, the effect of strain on the optical and electronic properties of MoS2 layers has attracted particular attention as it can improve the performance of optoelectronic and spintronic devices. Although several approaches have been explored, strain is typically externally applied on the two-dimensional material. In this work, we describe the preparation of a reversible ‘self-strainable’ system in which the strain is generated at the molecular level by one component of a MoS2-based composite material. Spin-crossover nanoparticles were covalently grafted onto functionalized layers of semiconducting MoS2 to form a hybrid heterostructure. Their ability to switch between two spi…
Path to Overcome Material and Fundamental Obstacles in Spin Valves Based on Mo S 2 and Other Transition-Metal Dichalcogenides
2019
International audience; Experimental studies on spin valves with exfoliated 2D materials face the main technological issue of ferromagnetic electrode oxidation during the 2Ds integration process. As a twofold outcome, magne-toresistance (MR) signals are very difficult to obtain and, when they finally are, they are often far from expectations. We propose a fabrication method to circumvent this key issue for 2D-based spintronics devices. We report on the fabrication of NiFe/MoS 2 /Co spin valves with mechanically exfoliated mul-tilayer MoS 2 using an in situ fabrication protocol that allows high-quality nonoxidized interfaces to be maintained between the ferromagnetic electrodes and the 2D la…
Tetrazine Linkers as Plug-and-Play Tags for General Framework Functionalization and C60 Conjugation
2022
The value of covalent post-synthetic modification in expanding the chemistry and pore versatility of reticular solids is well documented. Here we use mesoporous crystals of UiO-68-TZDC to demonstrate the value of tetrazine connectors for all-purpose inverse electron-demand Diels-Alder ligation chemistry. Our results suggest a positive effect of tetrazine reticulation over its reactivity for quantitative one-step functionalization with a broad scope of alkene or alkyne dienophiles into pyridazine and dihydropyridazine frameworks. This permits generating multiple pore environments with diverse chemical functionalities and the expected accessible porosities, that is also extended to the synthe…
WS 2 /MoS 2 Heterostructures through Thermal Treatment of MoS 2 Layers Electrostatically Functionalized with W 3 S 4 Molecular Clusters
CCDC 1989161: Experimental Crystal Structure Determination
2020
Related Article: Carlos Bartual-Murgui, Víctor Rubio-Giménez, Manuel Meneses-Sánchez, Francisco Javier Valverde-Muñoz, Sergio Tatay, Carlos Martí-Gastaldo, M. Carmen Muñoz, José Antonio Real|2020|ACS Applied Materials and Interfaces|12|29461|doi:10.1021/acsami.0c05733
CCDC 1989160: Experimental Crystal Structure Determination
2020
Related Article: Carlos Bartual-Murgui, Víctor Rubio-Giménez, Manuel Meneses-Sánchez, Francisco Javier Valverde-Muñoz, Sergio Tatay, Carlos Martí-Gastaldo, M. Carmen Muñoz, José Antonio Real|2020|ACS Applied Materials and Interfaces|12|29461|doi:10.1021/acsami.0c05733
CCDC 1989157: Experimental Crystal Structure Determination
2020
Related Article: Carlos Bartual-Murgui, Víctor Rubio-Giménez, Manuel Meneses-Sánchez, Francisco Javier Valverde-Muñoz, Sergio Tatay, Carlos Martí-Gastaldo, M. Carmen Muñoz, José Antonio Real|2020|ACS Applied Materials and Interfaces|12|29461|doi:10.1021/acsami.0c05733
CCDC 1910990: Experimental Crystal Structure Determination
2020
Related Article: Carlos Bartual-Murgui, Víctor Rubio-Giménez, Manuel Meneses-Sánchez, Francisco Javier Valverde-Muñoz, Sergio Tatay, Carlos Martí-Gastaldo, M. Carmen Muñoz, José Antonio Real|2020|ACS Applied Materials and Interfaces|12|29461|doi:10.1021/acsami.0c05733
CCDC 1960226: Experimental Crystal Structure Determination
2020
Related Article: Javier Castells-Gil, Natalia M. Padial, Neyvis Almora-Barrios, Rodrigo Gil-San-Millán, María Romero-Ángel, Virginia Torres, Iván da Silva, Bruno C.J. Vieira, Joao C. Waerenborgh, Jaciek Jagiello, Jorge A.R. Navarro, Sergio Tatay, Carlos Martí-Gastaldo|2020|Cell Press: Chem|6|3118|doi:10.1016/j.chempr.2020.09.002
CCDC 1989159: Experimental Crystal Structure Determination
2020
Related Article: Carlos Bartual-Murgui, Víctor Rubio-Giménez, Manuel Meneses-Sánchez, Francisco Javier Valverde-Muñoz, Sergio Tatay, Carlos Martí-Gastaldo, M. Carmen Muñoz, José Antonio Real|2020|ACS Applied Materials and Interfaces|12|29461|doi:10.1021/acsami.0c05733
CCDC 1910992: Experimental Crystal Structure Determination
2020
Related Article: Carlos Bartual-Murgui, Víctor Rubio-Giménez, Manuel Meneses-Sánchez, Francisco Javier Valverde-Muñoz, Sergio Tatay, Carlos Martí-Gastaldo, M. Carmen Muñoz, José Antonio Real|2020|ACS Applied Materials and Interfaces|12|29461|doi:10.1021/acsami.0c05733
CCDC 1893564: Experimental Crystal Structure Determination
2019
Related Article: Donatella Armentano, Alejandro Nuñez-Lopez, Marta Galbiati, Natalia M. Padial, Carolina R. Ganivet, Sergio Tatay, Emilio Pardo, Carlos Martí-Gastaldo|2019|Angew.Chem.,Int.Ed.|58|9179|doi:10.1002/anie.201904890
CCDC 1965235: Experimental Crystal Structure Determination
2020
Related Article: Natalia M. Padial, Bel��n Lerma-Berlanga, Neyvis Almora-Barrios, Javier Castells-Gil, Iv��n da Silva, Mar����a de la Mata, Sergio I. Molina, Jes��s Hern��ndez-Saz, Ana E. Platero-Prats, Sergio Tatay, Carlos Mart����-Gastaldo|2019|J.Am.Chem.Soc.|142|6638|doi:10.1021/jacs.0c00117
CCDC 2023345: Experimental Crystal Structure Determination
2021
Related Article: Belén Lerma-Berlanga, Carolina R. Ganivet, Neyvis Almora-Barrios, Sergio Tatay, Yong Peng, Josep Albero, Oscar Fabelo, Javier González-Platas, Hermenegildo García, Natalia M. Padial, Carlos Martí-Gastaldo|2021|J.Am.Chem.Soc.|143|1798|doi:10.1021/jacs.0c09015
CCDC 1910991: Experimental Crystal Structure Determination
2019
Related Article: Carlos Bartual-Murgui, Víctor Rubio-Giménez, Manuel Meneses-Sánchez, Francisco Javier Valverde-Muñoz, Sergio Tatay, Carlos Martí-Gastaldo, M. Carmen Muñoz, José Antonio Real|2020|ACS Applied Materials and Interfaces|12|29461|doi:10.1021/acsami.0c05733
CCDC 1910989: Experimental Crystal Structure Determination
2019
Related Article: Carlos Bartual-Murgui, Víctor Rubio-Giménez, Manuel Meneses-Sánchez, Francisco Javier Valverde-Muñoz, Sergio Tatay, Carlos Martí-Gastaldo, M. Carmen Muñoz, José Antonio Real|2020|ACS Applied Materials and Interfaces|12|29461|doi:10.1021/acsami.0c05733
CCDC 1989162: Experimental Crystal Structure Determination
2020
Related Article: Carlos Bartual-Murgui, Víctor Rubio-Giménez, Manuel Meneses-Sánchez, Francisco Javier Valverde-Muñoz, Sergio Tatay, Carlos Martí-Gastaldo, M. Carmen Muñoz, José Antonio Real|2020|ACS Applied Materials and Interfaces|12|29461|doi:10.1021/acsami.0c05733
CCDC 1989158: Experimental Crystal Structure Determination
2020
Related Article: Carlos Bartual-Murgui, Víctor Rubio-Giménez, Manuel Meneses-Sánchez, Francisco Javier Valverde-Muñoz, Sergio Tatay, Carlos Martí-Gastaldo, M. Carmen Muñoz, José Antonio Real|2020|ACS Applied Materials and Interfaces|12|29461|doi:10.1021/acsami.0c05733
CCDC 2023346: Experimental Crystal Structure Determination
2021
Related Article: Bel��n Lerma-Berlanga, Carolina R. Ganivet, Neyvis Almora-Barrios, Sergio Tatay, Yong Peng, Josep Albero, Oscar Fabelo, Javier Gonz��lez-Platas, Hermenegildo Garc��a, Natalia M. Padial, Carlos Mart��-Gastaldo|2021|J.Am.Chem.Soc.|143|1798|doi:10.1021/jacs.0c09015
CCDC 2018540: Experimental Crystal Structure Determination
2021
Related Article: Elena López‐Maya, Natalia M. Padial, Javier Castells‐Gil, Carolina R. Ganivet, Ana Rubio‐Gaspar, Francisco G. Cirujano, Neyvis Almora‐Barrios, Sergio Tatay, Sergio Navalón, Carlos Martí‐Gastaldo|2021|Angew.Chem.,Int.Ed.|60|11868|doi:10.1002/anie.202100176