Search results for "CKS"
showing 10 items of 611 documents
Ion irradiation of AZO thin films for flexible electronics
2017
Aluminum doped Zinc oxide (AZO) is a promising transparent conductor for solar cells, displays and touch-screen technologies. The resistivity of AZO is typically improved by thermal annealing at temperatures not suitable for plastic substrates. Here we present a non-thermal route to improve the electrical and structural properties of AZO by irradiating the TCO films with O+ or Ar+ ion beams (30–350 keV, 3 × 1015–3 × 1016 ions/cm2) after the deposition on glass and flexible polyethylene naphthalate (PEN). X-ray diffraction, optical absorption, electrical measurements, Rutherford Backscattering Spectrometry and Atomic Force Microscopy evidenced an increase of the crystalline grain size and a …
Formation of cobalt silicide from filter metal vacuum arc deposited films
2006
The thermal reaction of Co film deposited on Si(111) surfaces by a high current filter metal vacuum arc (FMEVAD) system has been studied. After deposition the films were annealed over the 400-900 degrees C temperature range for 30 min. Rutherford backscattering spectrometry (RBS) was used to characterize the elemental depth distributions in the films subjected to different annealing temperatures. Ordered chemical phases were determined by glancing-incidence X-ray diffraction (GIXRD) and the morphology was determined by cross section transmission electron microscopy (TEM). The results show that the phases formed are Co2Si at 400 degrees C, CoSi + Coo at 500 degrees C, CoSi + CoSi2 at 600 deg…
A study of solar thermal absorber stack based on CrAlSiNx/CrAlSiNxOy structure by ion beams
2019
Renewable energies are foreseen as a major energy resource for next generations. Among several energy sources and technologies available, Concentrated Solar Power (CSP) technology has a great potential, but it needs to be optimised, in particular to reduce the costs, with an increase of the operating temperature and long term stability. This goal can be achieved by tailoring the composition and multilayer structure of films. In this work we present and discuss the results obtained from solar absorber coatings based on nitride/oxynitride structures. A four-layer film structure, W/CrAlSiNx(HA)/CrAlSiNxOy(LA)/SiAlOx, was deposited on stainless steel substrates using magnetron sputtering deposi…
Ordering effects in extreme high-resolution depth profiling with MeV ion beams
2012
Abstract The continuing development of depth profiling with MeV ion beam methods with depth resolutions in the nanometre, and even sub-nanometre, regime implies the resolved depth become comparable with the interatomic spacing. To investigate how short-range ordering influences depth profiles at these resolutions, we have employed a mathematical modelling approach. The radial, g ( r ) and depth distribution, g ( z ) functions were calculated for (1 0 0) surface, random and amorphous Si structures at 300 K produced using molecular dynamics simulations with the EDIP quasi-empirical potential. The results showed that short-range ordering lead to reduction of the scattering yield below the deep…
Characterization of alpha sources prepared by direct evaporation using Rutherford backscattering spectrometry
1997
Abstract Standardization of solutions containing alpha emitting nuclides by direct evaporation onto metal supports is a widely used technique due to its simplicity in providing good quantitative results. In order to avoid inhomogeneity in the deposition surface, polished stainless steel disks and a spreading agent are generally used. These sources are usually measured by alpha spectrometry using passivated implanted silicon detectors. The resolution of the source is a measure of the thickness and homogeneity of the evaporated layer. Rutherford backscattering of He+ and H+ was here used to measure directly this thickness and homogeneity. The results were in agreement with semiconductor detec…
Synthesis and characterization of cobalt silicide films on silicon
2006
Cobalt silicide has emerged as a leading contact material in silicon technology due to its low resistivity, high stability and small lattice mismatch. In this study, 0.2-0.4 mu m thick Co films were deposited on Si(100) wafers by RF magnetron sputtering at room temperature, and annealed at temperatures from 600 to 900 degrees C in vacuum. As-deposited and annealed samples were characterized by Rutherford backscattering spectrometry (RBS), nuclear reaction analysis (NRA), X-ray diffraction (XRD) and scanning electron microscopy (SEM). Although the Si substrates were sputter cleaned before the deposition, all the samples showed a thin oxide layer at the Si/Co interfaces. Annealing up to 700 d…
Dislocation mobility study of heavy ion induced track damage in LiF crystals
2008
Track damage created in LiF crystals by swift U, Kr, Xe and Ni ions with a specific energy of 11.1 MeV/u was studied using dislocation mobility measurements, track etching, SEM, AFM and optical microscopy. The results demonstrate continuity of etching of U tracks while discontinuities of etching are observed in the case of Xe ions. The relationship between the track structure and dislocation mobility in irradiated crystals is discussed. The dislocation mobility technique can serve as a highly sensitive method for track core damage studies.
The Mu3e Data Acquisition
2020
The Mu3e experiment aims to find or exclude the lepton flavour violating decay $\mu^+\to e^+e^-e^+$ with a sensitivity of one in 10$^{16}$ muon decays. The first phase of the experiment is currently under construction at the Paul Scherrer Institute (PSI, Switzerland), where beams with up to 10$^8$ muons per second are available. The detector will consist of an ultra-thin pixel tracker made from High-Voltage Monolithic Active Pixel Sensors (HV-MAPS), complemented by scintillating tiles and fibres for precise timing measurements. The experiment produces about 100 Gbit/s of zero-suppressed data which are transported to a filter farm using a network of FPGAs and fast optical links. On the filte…
Characterization of 233U alpha recoil sources for 229()Th beam production
2019
Radioactive $^{233}$U alpha recoil sources are being considered for the production of a thorium ion source to study the low-energy isomer in $^{229}$Th with high-resolution collinear laser spectroscopy at the IGISOL facility of the University of Jyv\"askyl\"a. In this work two different $^{233}$U sources have been characterized via alpha and gamma spectroscopy of the decay radiation obtained directly from the sources and from alpha-recoils embedded in implantation foils. These measurements revealed rather low $^{229}$Th recoil efficiencies of only a few percent. Although the low efficiency of one of the two sources can be attributed to its inherent thickness, the low recoil efficiency of th…
The MATHUSLA test stand
2020
The rate of muons from LHC $pp$ collisions reaching the surface above the ATLAS interaction point is measured and compared with expected rates from decays of $W$ and $Z$ bosons and $b$- and $c$-quark jets. In addition, data collected during periods without beams circulating in the LHC provide a measurement of the background from cosmic ray inelastic backscattering that is compared to simulation predictions. Data were recorded during 2018 in a 2.5 $\times$ 2.5 $\times$ 6.5~$\rm{m}^3$ active volume MATHUSLA test stand detector unit consisting of two scintillator planes, one at the top and one at the bottom, which defined the trigger, and six layers of RPCs between them, grouped into three $(x…