Search results for "Spinning"
showing 10 items of 204 documents
Nanozymes in Nanofibrous Mats with Haloperoxidase-like Activity To Combat Biofouling.
2018
Electrospun polymer mats are widely used in tissue engineering, wearable electronics, and water purification. However, in many environments, the polymer nanofibers prepared by electrospinning suffer from biofouling during long-term usage, resulting in persistent infections and device damage. Herein, we describe the fabrication of polymer mats with CeO2–x nanorods that can prevent biofouling in an aqueous environment. The embedded CeO2–x nanorods are functional mimics of natural haloperoxidases that catalyze the oxidative bromination of Br– and H2O2 to HOBr. The generated HOBr, a natural signaling molecule, disrupted the bacterial quorum sensing, a critical step in biofilm formation. The pol…
Atomic layer deposition of Ti-Nb-O thin films onto electrospun fibers for fibrous and tubular catalyst support structures
2018
Here, the authors report on the preparation of core-shell carbon-ceramic fibrous as well as ceramic tubular catalyst supports utilizing electrospinning and atomic layer deposition (ALD). In this paper, ALD of Ti-Nb-O thin films using TiCl4, Nb(OEt)5, and H2O as precursors is demonstrated. According to the time-of-flight-elastic recoil detection analysis and Rutherford backscattering spectrometry, carbon and hydrogen impurities were relatively low, but depend on the pulsing ratio of the precursors. Optimized ALD process was used for coating of sacrificial electrospun polyvinyl alcohol (PVA) template fibers to yield tubular Ti-Nb-O structures after thermal or solution based PVA removal. Anoth…
Influence of Drawing on the Antimicrobial and Physical Properties of Chlorhexidine-Compounded Poly(caprolactone) Monofilaments
2015
In this work, we prepared poly(caprolactone) (PCL) monofilaments incorporating different amounts of the antiseptic chlorhexidine diacetate (CHX) and evaluated the effect of “online” drawing during the melt spinning or of an “offline” cold drawing on the antimicrobial and physical properties of PCL/CHX monofilaments. The results showed that the drawing conditions strongly affected the properties of the threads. In particular, the filaments exhibited antimicrobial activity for all the draw ratios (DR) adopted, but on increasing DR the antibacterial efficiency reduced. These results were correlated with the CHX surface concentration and with the release kinetics.
Electrospun PCL/GO-g-PEG structures: Processing-morphology-properties relationships
2017
Abstract Polycaprolactone (PCL) biocomposite nanofiber scaffolds with different concentrations of graphene oxide (GO) and GO surface grafted with poly(ethylene glycol) (GO-g-PEG) were prepared by electrospinning. Morphological, mechanical as well as wettability characterizations of electrospun nanofibers were carried out. Results showed that the average diameter of PLA/GO electrospun nanofibers decreased upon increasing the filler content. Differently, the diameter increased while using GO-g-PEG. Both nanofillers enhanced the electrospun PCL hydrophilicity even if PCL/GO-g-PEG samples exhibited improved wettability. The Young moduli of the composite nanofiber mats were improved by adding GO…
Rapid One-Step Fabrication of Graphene Oxide-Decorated Polycaprolactone Three-Dimensional Templates for Water Treatment
2020
Coating of flexible substrates is crucial to prepare versatile, multifunctional materials. However, exploration of effective fabrication approaches is still a challenging issue, because the pathways generally proposed require time-consuming, multistep protocols. Here, we developed a one-pot process for decorating either pearl necklace-like or fibrous fluffy-like structures of polycaprolactone (PCL) with graphene oxide (GO) skin. PCL solutions were dry jet-wet electrosprayed or electrospun into a stirred liquid collector constituted by ethanol-containing GO nanoparticles. The stirred liquid collector enables the formation of 3D-structures, whose microarchitecture can be designed by controlli…
Elastomeric Electrospun Polyurethane Scaffolds: The Interrelationship Between Fabrication Conditions, Fiber Topology, and Mechanical Properties
2010
Electrospinning has been gaining increasing popularity in the fabrication of engineered tissue scaffolds due to its ability to produce nano to micro scale fibrous sheets. Many investigators have attempted to apply various degrees of control to this process in order to produce fiber meshes with more predictable patterns. These attempts have largely been limited to controlling fiber alignment and have fallen into two categories: physical manipulation of the fibers by pulling them into alignment using a rapidly spinning mandrel[1–3] or manipulation of the electric field during fabrication.[4, 5]
PBI mixed matrix hollow fiber membrane: Influence of ZIF-8 filler over H2/CO2 separation performance at high temperature and pressure
2020
High performance and commercially attractive mixed-matrix membranes were developed for H2/CO2 separation via a scalable hollow fiber spinning process. Thin (~300 nm) and defect-free selective layers were successfully created with a uniform distribution of the nanosized (~60 nm) zeolitic-imidazole framework (ZIF-8) filler within the polymer (polybenzimidazole, PBI) matrix. These membranes were able to operate at high temperature (150 °C) and pressure (up to 30 bar) process conditions required in treatment of pre-combustion and syngas process gas streams. Compared with neat PBI hollow fibers, filler incorporation into the polymer matrix leads to a strong increase in H2 permeance from 65 GPU t…
Mesoporous ZnFe2O4@TiO2 Nanofibers Prepared by Electrospinning Coupled to PECVD as Highly Performing Photocatalytic Materials
2017
International audience; Zinc ferrite @ titanium dioxide (ZnFe2O4@TiO2) composite nanofibers were elaborated by combining the two different techniques: electrospinning and plasma-enhanced chemical vapor deposition (PECVD). The nanofiber compositions were controlled using different ratios of zinc to iron. Their structural, morphological, and optical properties were analyzed by scanning electron microscopy, X-ray diffraction, energy-dispersive X-ray spectroscopy, BET surface area, Raman spectroscopy, and UV–visible spectrophotometry. The photocatalytic activity has been investigated by the degradation of methylene blue under visible light. The results indicate that the combination of spinel st…
Electrospun TiO2 embedded nanofibers for photocatalytic applications
2019
The development of photocatalysts with low cost, high reactivity and easy recovery provides great potentials for environmental remediation. In this study, polyacrylonitrile (PAN) nanofibers containing titanium dioxide ([Formula: see text]) nanoparticles were successfully fabricated using a facile electrospinning technique. The effects of [Formula: see text] content, PAN concentration and thermal treatment on the adsorption and photocatalysis properties of [Formula: see text] nanofibers have been investigated. The results indicate that the embedded [Formula: see text] nanofibers possess the property to effectively decompose rhodamine B (RhB) under simulated sunlight irradiation. The enhance…
Effect of graphene and fabrication technique on the release kinetics of carvacrol from polylactic acid
2019
Abstract Porous membranes and thin films containing poly-lactic acid (PLA), carvacrol (CRV) and graphene nanoplatelets (GNP) were fabricated by electrospinning and solvent casting at different formulations. The systems were characterized from a mechanical, morphological, calorimetric and spectroscopic point of view. CRV release as a function of time was studied and a mathematical model was used to fit and interpret the data in order to investigate the release mechanism. The results indicate that the incorporation of GNP generally determined a simultaneous strengthening, stiffening and toughening effect, while preserving a good ductility. Furthermore, integrating GNP allowed tuning the amoun…