Flavor: from food to behaviors, wellbeing and health

2016

Revue; Andrée Voilley and Patrick Etiévant published a book entitled “Flavour in Food” in 2006. Since then, few progress was made in the field of flavor and taste constituents and of their interactions in various food matrices during the production process, the storage or the maturation of food and finally during eating.When our Publisher asked us an update for this edition, we thought that it was not the best thing to do, but that we should take advantage of this offer to publish a sort of follow-up of this first edition.In the last 10 years, it was obvious that large research efforts were made to understand how odor components stimulate the numerous receptors discovered in the early 1990s…

Transport parameters for aroma compounds through i-carrageenan and sodium alginate-based edible films

2011

In an effort to produce more environmentally friendly materials, renewable and biodegradable biopolymers have been investigated as coating materials. Edible films obtained from i-carrageenan and sodium alginates have good mechanical characteristics, are emulsion stabilizers, and decrease oxygen transfer. The addition of lipids to form emulsified films decreases the water vapour transfer and could be used to encapsulate active substances or aroma compounds. The aim of this work was to measure permeability, sorption and diffusion coefficient of the n-hexanal and D-limonene aroma compounds through emulsified (wf) and non-emulsified (wof) i-carrageenan and sodium alginate-based films to finally…

How composition and process parameters affect volatile active compounds in biopolymer films

2012

Abstract Active edible films based on chitosan and containing an active aroma compound have been investigated. The influence of the composition of the film forming solution (solvent, plasticizers, nanoparticles, emulsifiers and aroma traps) and process parameters (temperature and viscosity) on drying kinetics, water content, colour, aroma compound retention and partition coefficient was studied. Solvent evaporation rate was increased by addition of ethanol. Water evaporation was delayed by glycerol. The aroma retention during film drying was directly related to the water content. The drying temperature had opposite influences according to the composition of the solvent and additives. Increa…

Effects of physico-chemical parameters of a model wine on the binding of γ-decalactone on bovine serum albumin

1995

Abstract To understand the effect of temperature, pH and the composition of alcoholic beverages in flavour-protein interactions, the binding of γ-decalactone to bovine serum albumin (BSA) was investigated using the equilibrium dialysis method. Thermodynamic analysis revealed that the affinity of aroma compound for BSA is higher at 10 °C than at 20 and 30 °C, while the number of binding sites (n = 6–7) is not modified at the three temperatures. pH did not have any appreciable effect on flavour binding in the presence of ethanol, but it was observed that a decrease of 1.8 pH unit reduces binding by 40% in its absence. The presence of ethanol has no effect on the number of binding sites and on…

Transfer of Water and Volatiles at Interfaces: Application to Complex Food Systems

2013

International audience; During processing, storage and consumption, mass transfer of various small molecules (water, gases, flavour compounds or other solutes) occurs between the different phases in complex food products, or between complex food and its surroundings. These mass transfers can lead to physical or chemical changes and thus induce food quality modifications.The objective of this paper is to better understand the behaviour of small molecules at the interfaces, especially in model heterogeneous food systems. Different techniques have been designed to characterize mass transfers of these small molecules and their effects on food properties. In particular, techniques such as rotati…

Production de gamma-decalactone par bioconversion

1993

Methyl cellulose-based edible films and coatings I. Effect of plasticizer content on water and 1-octen-3-ol sorption and transport

1995

Edible films were prepared from methyl cellulose with various concentrations of poly(ethylene glycol) 400 (PEG400) used as a plasticizer. Water vapour and 1-octen-3-ol (an aroma compound) were selected as hydrophilic and hydrophobic volatile penetrants respectively. Their solubility and permeability through methyl cellulose-based edible films were studied using gas chromatography methods. Whatever penetrant was used, the flux increased with the PEG400 content. Transfer behaviour, i.e., the order of increased magnitude of the transfer rate, strongly depends on the nature of the volatile compound. However, water sorption only depends on the PEG400 content whereas the aroma compound sorption i…

Transfers of small analytes in a multiphasic stirred fruit yoghurt model

2007

International audience; The transfer of small analytes in a multiphasic stirred fruit yoghurt model, made of a pectin gel aimed to mimic fruit pieces and of a dairy gel done with milk acidified by glucono-δ-lactone hydrolysis, have been studied. The concentration gradients between the pectin gel and the dairy gel were the driving force for the migration of small analytes (i.e. water, protons and colorants). Water migrated from the dairy to the pectin gel, causing modifications in the water content of both gels and an equilibration of their water activity at 0.938±0.003. Inversely, protons migrated from the pectin to the dairy gel. These changes in composition of both gels being likely to ha…

Aroma compound transfer between a solid food matrix and packaging films: a comprehensive approach

2008

International audience; Food quality is highly dependent on mass transfers occurring in food / packaging systems during storage. Particularly, aroma compound transfers are influenced by the composition and structure of the packaging and food matrix, the physico-chemical properties of aroma compounds and the conditions of the external environment (1). The influence of the food matrix on aroma compound-packaging film interactions was little studied in the literature (2,3). The objective of this work, in the framework of the French project CANAL ARLE, is to better understand aroma compound transfer into and through cellulosic and thermoplastic packaging films by taking into account their inter…

Techniques to measure sorption and migration between small molecules and packaging. A critical review

2015

The mass transfer parameters diffusion and sorption in food and packaging or between them are the key parameters for assessing a food product's shelf-life in reference to consumer safety. This has become of paramount importance owing to the legislations set by the regulated markets. The technical capabilities that can be exploited for analyzing product–package interactions have been growing rapidly. Different techniques categorized according to the state of the diffusant (gas or liquid) in contact with the packaging material are emphasized in this review. Depending on the diffusant and on the analytical question under review, the different ways to study sorption and/or migration are present…

Carvacrol affects interfacial, structural and transfer properties of chitosan coatings applied onto polyethylene

2012

Different chitosan coating solutions were tested with the aim of investigating their adhesion and wettability onto polyethylene film to improve packaging performance and provide antimicrobial properties. Surface wetting kinetics was monitored by contact angle measurements. Addition of ethanol and carvacrol improved wettability and adhesion of the thin chitosan layer. Structure, water vapour, O2, CO2 and air permeabilities of self supported chitosan films and coated polyethylene were determined. The formation of a thin chitosan layer on polyethylene improved gas barrier properties decreasing the Permeability Coefficient for oxygen and carbon dioxide ( [Formula: see text] , [Formula: see text…

Investigation of water transfer across thin layer biopolymer films by infrared spectroscopy

2011

International audience; The investigation of the apparent diffusivity of water in thin layer iota-carrageenan-based films by FTIR-ATR spectroscopy clearly evidences the fundamental role of surface properties on water transfer. Water diffusivity in iota-carrageenan based biopolymer films ranges from 0.3 to 1.3 × 10−10 m2 s−1 and is thus 10–100 times lower than that in highly hydrated carrageenan gels. The surface heterogeneity and composition when fat is added strongly influence the diffusivity by modifying the liquid water absorption at the inner surface.This study of diffusing molecules in liquid state is particularly interesting to mimic situations where direct liquid water contact occurs…

The production of lactone by micro-organisms: a review with particular interest to the model: Ricinoleic acid-Spiridiobolus spp.-gamma-decalactone

1999

*INRA URD BP 86510 21065 Dijon cedex (FRA) Diffusion du document : INRA URD BP 86510 21065 Dijon cedex (FRA); International audience

Transferts de matière au travers des emballages au contact de produits alimentaires

2009

Le point sur des recherches dans le domaine des transferts de matière au travers des emballages : impact sur la qualité du produit, causes de ces transferts.

From macroscopic to molecular scale investigations of mass transfer of small molecules through edible packaging applied at interfaces of multiphase f…

2009

Abstract This paper presents a multi-scale approach to investigate mass transfer properties of edible films that integrates some published data and new original results. The transport of small molecules, such as water, between the different parts of multiphase food products leads to quality deterioration and thus requires the use of barrier edible films or coatings. Therefore, it is necessary to characterise the properties of both food and edible barriers, like the diffusivities of their respective migrants. Surface properties characterisation of edible films, composed of an iota-carrageenan matrix in association with a high melting point fat was investigated by goniometry and allows the de…

Physicochemical Interactions Between Aroma Compounds and Milk Proteins: Effect of Water and Protein Modification

1998

The physicochemical interactions between aroma compounds and sodium caseinate were studied by complementary techniques involving the protein in aqueous solution at 25 or 75 g/L (exponential dilution and equilibrium dialysis) or in a solid state (sorption and infrared spectroscopy). No retention of acetone, ethyl acetate, and 2-propanol in aqueous solutions was found by exponential dilution and equilibrium dialysis. Diacetyl and benzaldehyde interacted with sodium caseinate through strong and weak bonds, as found by equilibrium dialysis. The results obtained by sorption differ from those obtained in aqueous solutions. The compounds that sorbed best to sodium caseinate were acetone and ethyl …

Protein and glycerol contents affect physico-chemical properties of soy protein isolate-based edible films

2010

Abstract This study was conducted to determine the effect of both soy protein and glycerol contents on physico-chemical properties of soy protein isolate-based edible (SPI) films. The aim of this study was to better understand the influence of SPI and GLY contents on the behavior of the physico-chemical properties of soy protein isolate-based films. Films were casted from heated (70 °C for 20 min) alkaline (pH 10) aqueous solutions of SPI at 6, 7, 8, and 9 (w/w %), glycerol (50%, w/w, of SPI) and SPI at 7 (w/w %), glycerol (40, 60, 70 %, w/w of SPI). Water vapor permeability (WVP), was measured at 25 °C and for four different relative humidities (30–100%, 30–84%, 30–75%, 30–53%). Surface pr…

Qualitative and quantitative evaluation of mono- and disaccharides in d-fructose, d-glucose and sucrose caramels by gas–liquid chromatography–mass sp…

1999

The monosaccharide (D-fructose, D-glucose, anhydrosugars), disaccharide (glucobioses) and pseudodisaccharide (di-D-fructose dianhydrides) content of D-fructose, D-glucose and sucrose caramels has been determined by gas-liquid chromatography-mass spectrometry (GLC-MS) of their trimethylsilyl (TMS) or TMS-oxime derivatives. The chromatographic profiles revealed significant differences in the disaccharide/pseudodisaccharide distribution depending on the caramel source: a D-fructose caramel contains prominent proportions of di-D-fructose dianhydrides, a D-glucose caramel mainly D-glucobioses, and a sucrose caramel similar proportions of both disaccharide/pseudodisaccharide series. It is notewor…

Sorption of wine volatile phenols by yeast lees

2005

The capacity of Saccharomyces cerevisiae yeast lees to sorb 4-ethylguaiacol and 4-ethylphenol was investigated in a synthetic medium and in wine. Active dried yeast was more effective when volatile phenols were diluted in red wine. Partition coefficients between wine model solution and wine yeast lees were determined and compared with those measured for dried active yeast. They showed a larger affinity of volatile phenols for wine yeast lees than for dried active yeast. The effect of yeast lees on volatile phenol sorption was sensitive to yeast autolysis level and to physicochemical parameters, such as ethanol content, temperature and pH. These results could be applied in the technology of …

Conclusion. Vers des approches intégrées de la flaveur et de la texture des aliments

2012

National audience

Influence of Mannaproteins from Yeast on the Aroma Intensity of a Model Wine

1994

Abstract The influence of mannaproteins released from yeast cell walls during alcoholic fermentation on the volatility of aroma substances was investigated in a model wine. After the characterization of macromolecules (substrates), two techniques have been used to study the interactions with aroma compounds: headspace analysis and an equilibrium dialysis method. The assumed effects of these macromolecules from yeasts on the fixation of volatile compounds were demonstrated. The physico-chemical interactions between aroma substances and mannaproteins depended on the nature of volatile compounds. Protein concentration in substrates was an important factor in their binding capacity. The retenti…

Importance of surface tension characterization for food, pharmaceutical and packaging products: a review.

2006

This article reviews the various theoretical approaches that have been developed for determination of the surface tension of solids, and the applications to food industrial products. The surface tension of a solid is a characteristic of surface properties and interfacial interactions such as adsorption, wetting or adhesion. The knowledge of surface tension is thus of great interest for every domain involved in understanding these mechanisms, which recover a lot of industrial investigations. Indeed, it is the case for the packaging industry, the food materials science, the biomedical applications and the pharmaceutical products, cleaning, adhesive technology, painting, coating and more gener…

Corrigendum to “Influence of temperature and NaCl on the release in aqueous liquid media of aroma compounds encapsulated in edible films” [Journal of…

2012

Effect of relative humidity on carvacrol release and permeation properties of chitosan based films and coating

2014

International audience; The influence of water vapour conditions on mass transport and barrier properties of chitosan based films and coatings were studied in relation to surface and structural properties. Water contact angles, material swelling, polymer degradation temperature, barrier properties (PO2, PCO2, WVP) and aroma diffusion coefficients were determined. The solvent nature and the presence of carvacrol influenced the surface and structural properties and then the barrier performance of activated chitosan films. Increasing RH from 0% to 100% led to a significant increase in material swelling. The plasticization effect of water was more pronounced at high humid environment, while at …

In situ recovery of gamma-decalactone by membrane based solvent extraction : an integrated bioreactor-separator

1999

International audience

Etude des transferts entre phases au sein d'une matrice laitière aux fruits

2005

National audience

Temperature effect on solubility of aroma compounds in various aqueous solutions

2005

International audience; Solubility of nine aroma compounds (methyl ketones, ethyl esters, aldehyde and alcohol) in various aqueous solutions was measured by the mutual solubility method from -10 to +10degreesC. Influence of both, the nature (carbohydrates and polyols) and the substrate concentration (from 0 to 57.5g/100g) on aroma solubility in aqueous solutions was studied. Aroma solubility in water decreased when aroma hydrophobicity increased. Aroma solubility in various aqueous solutions decreased when substrate concentration increased; their solubility was higher in polyols solutions than in polysaccharides ones. Temperature effect on aroma solubility showed a noncontinuous evolution f…

Effect of the temperature on the release of aroma compounds and on the rheological behaviour of model dairy custard

2008

The influence of temperature was pointed out on the release of aroma compounds from a model dairy dessert and on its rheological behaviour. The recipe chosen for inter-laboratory studies within the programme of COST Action 921 was tested. The custards were flavoured with three aroma compounds belonging to strawberry note. The partition coefficients of three compounds (ethyl butyrate, ethyl hexanoate, cis-3-hexenol) were determined at three temperatures (12 °C: tasting temperature of refrigerated dairy products, 20 °C: room temperature, and 37 °C: mouth temperature). Two textures of the custards were obtained using kappa- and iota-carrageenan. Penetrometry tests characterized the rheological…

Extraction of benzaldehyde from fermentation broth by pervaporation

1996

Abstract The application of pervaporation to extract benzaldehyde produced by microorganisms is considered. A model system was used to study the influence of different parameters and attempts to understand better the mass transfer of this flavour compound. Benzaldehyde was removed from a culture medium from which it was produced by Bjerkandera adusta . The performance of these processes is compared.

Competitive binding of aroma compounds by beta-cyclodextrin

2001

International audience

Flavour release at the interfaces of stirred fruit yoghurt models

2006

Abstract Model matrices consisting of a pectin and a dairy gel were investigated to study the transfer of flavour compounds between the different phases of stirred fruit yoghurt. Using a full factorial experimental design, different parameters (storage temperature, initial flavour concentration in the pectin gel and fat content of the dairy gel) were studied. The kinetics of the migration of flavour compounds between the two gels were investigated using a novel SPME method, where a Carboxen/Polydimethylsiloxane fibre was directly inserted into the pectin gel. Flavour compounds were predominantly retained in the pectin gel and thus, the presence of fat in the dairy gel did not affect their t…

Protection of active aroma compound against moisture and oxygen by encapsulation in biopolymeric emulsion-based edible films.

2008

International audience; Edible films made of ι-carrageenans display interesting advantages: good mechanical properties, stabilization of emulsions, and reduction of oxygen transfers. Moreover, the addition of lipids to ι-carrageenan-based films to form emulsified films decreases the transfer of water vapor and can be considered to encapsulate active molecules as flavors. The aim of this study was to better understand the influence of the composition and the structure of the carrageenan-based film matrices on its barrier properties and thus on its capacity to encapsulate and to protect active substances encapsulated. Granulometry, differential scanning calorimetry, and Fourier transform infr…

BIOPOLYMERS USED AS EDIBLE COATING TO LIMIT WATER TRANSFER, COLOUR DEGRADATION AND AROMA COMPOUND 2-PENTANONE LOST IN MEXICAN FRUITS

2005

Low preservation of typical fruits in countries with warm weather represents a limitation to export. A recently proposed method to increase shelf-life of fresh guava, is the application of biopolymers as edible coatings. This research involves the use of biopolymers of microbial origin obtained with low cost nutrients, to prepare edible coatings applied on mexican guava and apricot. Dextrans obtained by fermentation with Leuconostoc mesenteroides isolated from a typical mexican beverage named pulque (cactus juice fermented). Dextrans were purified by precipitation with methanol and dispersed in purified water. This procedure was repeated 3 times to eliminate carbohydrates others than dextra…

Molecule structural factors influencing the loading of flavoring compounds in a natural-preformed capsule: Yeast cells

2016

International audience; Yeast cells are efficient microcapsules for the encapsulation of flavoring compounds. However, as they are preformed capsules, they have to be loaded with the active. Encapsulation efficiency is to a certain level correlated with LogP. In this study, the effect of structural factors on the encapsulation of amphiphilic flavors was investigated. Homological series of carboxylic acids, ethyl esters, lactones, alcohols and ketones were encapsulated into the yeast Yarrowia lipolytica. Although, in a single homological series, the length of the molecule and thus the LogP were correlated with encapsulation efficiency (EY%), big differences were observable between series. Fo…

Properties of treated papers and plastic film influencing ethyl ester transfer

2008

Abstract The objective of this work was to compare and understand the aroma compound barrier property of two impregnated–supercalendered papers, with or without surface coating, and one plastic film (BOPP) in standard conditions of temperature (25 °C) and relative humidity gradient (50%) for foodstuff storage. For that purpose, solubility, diffusivity and permeability coefficients were determined for a homologous series of ethyl esters with a range of physico-chemical properties and vapor concentrations. Whatever the aroma compound and its vapor concentration, the non-coated paper was the more permeable; the coated paper and BOPP presenting close and lower permeability values. The transfer …

Influence of interactions on water and aroma permeabilities of ι-carrageenan–oleic acid–beeswax films used for flavour encapsulation

2009

The objective of this work is to investigate the water and aroma barrier properties of films obtained from ι-carrageenan containing glycerol and lipids mixtures of oleic acid (OA) and beeswax (BW) used for encapsulation of active compounds. Water vapor permeability (WVP) is greatly influenced by lipid composition, encapsulated aroma compound and also relative humidity. WVP decreases when films contain encapsulated aroma compound but increases when the moisture content in the films increases. When oleic acid was the main compound of lipid phase, the plasticizing effect of water revealed through water permeability is less marked. The results of ethyl acetate, ethyl butyrate, ethyl hexanoate, …

Lipid hydrophobicity and physical state effects on the properties of bilayer edible films

2000

Abstract Edible bilayer films based on methylcellulose, used as the film-forming substance, and lipid mixtures, as barriers against moisture transfers, were prepared. The thickness of the lipid layer had little influence on film mechanical properties, regardless of the nature and the solid content of the fat layer. Mechanical resistance was mainly attributed to the methylcellulose matrix. The water vapor transfer rate (WVTR) decreased substantially when film thickness increased up to 100 μm. Upwards, transfer seemed to be independent of thickness. The WVTR was 1.5 up to 2.5 higher for triglyceride lipid layers than alkane lipid layers. Also, WVTR increased by a factor of 25–75 when the liqu…

Characterization of water mobility in dry and wetted roasted coffee using low-field proton nuclear magnetic resonance

2007

Abstract Roasted and ground coffee was studied by low-field 1 H nuclear magnetic resonance at various water contents and temperatures. The spin–spin relaxation times ( T 2 ) were measured with single pulse free induction decay (FID) and Carr–Purcell–Meiboom–Gill (CPMG) sequences. Four relaxing components were distinguished: the solid population was observed with FID sequence at T 2s ∼9 μs; the other three populations, measured with the CPMG sequence, corresponded to an apolar phase, the coffee oil, and two polar phases. The two polar populations, observed at T 2m ∼6 ms and ∼27 ms (for coffee with 50% water content at 90 °C) were attributed to water in cell wall polymers and in water filling…

Lipid-Based Edible Films and Coatings

2009

The quality of food products depends on their organoleptic, nutritional, and microbiological properties, all of which are subject to dynamic changes during storage and distribution. Such changes are mainly due to interactions between foods and their surrounding environment or to migration between different components within a composite food.

Competitive Binding of Aroma Compounds by β-Cyclodextrin

2001

Retention of six aroma compounds has been studied after dehydration of ternary mixtures of aroma water and beta-cyclodextrin. A maximal retention of a mole of aroma per mole of beta-cyclodextrin has been observed for five of the aroma compounds, whereas retention of benzyl alcohol can be twice as high. Retention of a mixture of aroma compounds has also been studied. It has been noted that when volatile compounds compete for the same binding sites on beta-cyclodextrin, ethyl hexanoate, 2-methylbutyric acid, and benzyl alcohol are, respectively, better retained than ethyl propionate, hexanoic acid, and hexanol. Preferential retention observed with esters can be simply explained by their diffe…

Requirement for a global design to remove fat from flavoured yoghurts

2006

Abstract The low-fat dairy desserts are generally not so much appreciated as the corresponding products containing fat because of altered flavour and texture characteristics. A review of the influence of fat on these aspects is proposed. Some methods used to correct for flavour imbalances also decrease the texture quality.

A new approach to studying sponge cake aroma after storage in treated paper and plastic packaging by direct gas chromatography–olfactometry (D-GC–O)

2007

The objective of this study was to use D-GC–O to compare the global odour of a sponge cake flavoured with either a ‘viennoiserie’ aromatic note or a simplified mixture of aroma compounds (used for physicochemical studies), then stored in a glass packaging (inert and impermeable) or in pouches made with treated papers or with plastic packaging, in accelerated ageing conditions (high temperature and relative humidity gradient). After 1 week of storage, the flavoured sponge cake headspace was SPME-extracted directly into the packaging and analysed by D-GC–O. The sponge cake global odour was better retained if plastic film rather than treated-papers was used, for both flavourings. Changes in th…

Sorption of aroma compounds to oak wood in wine ageing conditions

2003

National audience

Applications of spray-drying in microencapsulation of food ingredients: An overview

2007

International audience; Spray-drying process has been used for decades to encapsulate food ingredients such as flavors, lipids, and carotenoids. During this drying process, the evaporation of solvent, that is most often water, is rapid and the entrapment of the interest compound occurs quasi-instantaneously. This required property imposes a strict screening of the encapsulating materials to be used in addition to an optimization of the operating conditions. Likewise, if the encapsulated compound is of hydrophobic nature, the stability of the feed emulsion before drying should also be considered. Thus, spray-drying microencapsulation process must rather be considered as an art than a science…

Lipids and biopackaging

1997

Packaging is important to preserve food quality. It is a barrier to water vapor, gas, aroma, and solute migration between the food and the environment. With the recent increase in ecological consciousness, research has turned toward finding biodegradable materials. The different kinds of biopackaging are discussed with special focus on edible films. The aim of this review is to focus on the influence of lipids used in edible films, mainly for their efficiency as water-vapor barriers. The structure, degree of saturation, chainlength, physical state, shape and dimension of crystals, and distribution of lipids into the film influence the functional properties of the film. In general, the perfo…

Effect of plasticizers (water and glycerol) on the diffusion of a small molecule in iota-carrageenan biopolymer films for edible coating application.

2006

Translational diffusion of a fluorescein probe has been measured in iota-carrageenan edible films containing different amounts of glycerol (0, 15, 30, and 45%), using fluorescence recovery after photobleaching (FRAP) experiments. The effects of this plasticizer as well as the plasticizing effect of water on the diffusion of fluorescein have been studied in this edible coating mainly composed of natural biopolymer. Diffusion coefficients of about 10(-13) m2 s(-1) have been measured in these films for water activity (aw) lower than 0.7. Above this water content threshold, fluorescein translational diffusion coefficient increases up to 10(-12) m2 s(-1). Another interesting information obtained…

Encapsulation of aroma compounds in biopolymeric emulsion based edible films to control flavour release

2010

Abstract Flavour loss strongly affects food quality. In order to decrease flavour changes during food conservation, different strategies could be used. Aroma compound encapsulation allows the protection of food flavour from loss and degradative reactions, like oxidation. Edible films could be an encapsulation matrix: in the case of emulsified film, lipid globules incorporated can act as carriers of active molecules, such as aroma compounds. Edible films prepared from ι-carrageenans are interesting for good mechanical and gas barrier properties. The aim of this study was to encapsulate different aroma compounds in an ι-carrageenan emulsion based edible film. Release of ten aroma compounds wa…

Factors affecting the moisture permeability of lipid-based edible films: a review.

2002

Moisture transfers inside food products could be controlled or limited by the use of edible films. These are usually based on hydrophobic substances such as lipids to improve barrier efficiency. Water permeability of films is affected by many factors, depending on both the nature of barrier components, the film structure (homogeneous, emulsion, multilayer, etc.), crystal type, shape, size and distribution of lipids, and thermodynamics such as temperature, vapor pressure, or the physical state of water in contact to the films. After a brief presentation of lipids and hydrophobic substances used as moisture barrier, cited in the scientific literature, this article reviews all of the parameter…

Edible Arabinoxylan-Based Films. 1. Effects of Lipid Type on Water Vapor Permeability, Film Structure, and Other Physical Characteristics

2002

Arabinoxylans (AX) are natural fibers extracted from maize bran, an industrial byproduct. To promote this polymer as a food ingredient, development of edible coatings and films had been proposed. Indeed, composite arabinoxylan-based films were prepared by emulsifying a fat: palmitic acid, oleic acid, triolein, or a hydrogenated palm oil (OK35). Lipid effects on water vapor permeability (WVP), surface hydrophobicity (contact angles), lipid particle size, and mechanical properties were investigated. Results showed that OK35-AX emulsion films had the lowest WVP. Emulsified films presented a bimodal particle size distribution; however, the smallest particle mean diameter (0.54 microm) was obser…

Transfer of volatile phenols at oak wood/wine interface in a model system

2006

Abstract In order to assess the influence of wood on the concentration of aroma compounds during ageing of wine, the transfer of volatile phenols including 4-ethylphenol, eugenol and a homologous series of guaiacols from wine to oak wood were studied in a model system at 10°C. At equilibrium most of the volatile phenols adsorbed in the wood. The results display that the amounts adsorbed depend on the nature of the volatile phenols and the botanical origin of oak wood.

Interface and aroma barrier properties of iota-carrageenan emulsion–based films used for encapsulation of active food compounds

2009

Abstract Food quality preservation requires that the initial properties of the food products be maintained by protecting them from the environment and by limiting the gain or loss of external matter. Barrier edible films can preserve food quality by controlling moisture transfer, oxygen uptake or the loss of volatile aroma compounds. Edible films made of iota-carrageenans display interesting advantages: good mechanical properties, stabilization of emulsions and reduction in oxygen transfer. Moreover, lipid globules incorporated as emulsion-based films can be the carriers for the encapsulation of active volatile molecules such as flavor compounds. Such films also enhance the barrier properti…

Water vapour permeability, thermal and wetting properties of whey protein isolate based edible films

2010

Abstract This study deals with the effect of whey protein isolate (WPI) and glycerol (GLY) used as a plasticizer on some physical properties of cast whey protein isolate (WPI) films. Films were prepared from heated (80 °C for 30 min) aqueous solutions of WPI at 7, 8, 9 and 10% (w/w), GLY (40%, w/w, of WPI) and WPI at 8% (w/w), GLY (30, 40, and 60%, w/w, of WPI). For all types of films, water vapour permeability for four relative humidity differentials (30–100%, 30–84%, 30–75%, and 30–53%), surface and thermal properties were measured. Varying the proportion of WPI and GLY in edible films had some effect on water vapour permeability, wetting and thermal properties of WPI films. A cumulative …

Modified arabinoxylan-based films. Part B. Grafting of omega-3 fatty acids by oxygen plasma and electron beam irradiation.

2003

Arabinoxylans (AXs) are byproducts of the cereal milling industry. To obtain high-value products, AXs have been used as a film-forming agent. Hence, AX-based films are poor water vapor barriers. The objectives of this study were to graft omega-3 (omega3) fatty acids onto AX polymeric chains by using two new technologies: cold plasma and electron beam (EB) irradiation. Results show that the surface hydrophobicity of the modified films is higher than that of a waxy coating or a low-density polyethylene (LDPE) film. In addition, FTIR spectroscopy analysis reveals vibration bands attributed to new chemical functions. Finally, a decrease in water vapor permeability (WVP) is obtained for the film…

Lipid hydrophobicity, physical state and distribution effects on the properties of emulsion-based edible films

2000

Abstract Addition of lipids to polysaccharide-based films is necessary to improve water vapor barrier properties but it leads to a decrease of mechanical properties. Model emulsified edible films mainly composed of methylcellulose (film-forming substance) and lipid mixtures (moisture barrier) were prepared. The effect of the physicochemical characteristics of the lipid phase (hydrophobicity and physical state) and of its distribution within the methylcellulose-matrix on the mechanical and water vapor barrier film properties was investigated. The nature of the lipid phase had little influence on mechanical properties of emulsified films, but had a substantial effect on the water vapor barrie…

Kinetic study of the release of aroma compounds in different model food systems

2007

Abstract Kinetics of release as a function of time from different model food matrices (mineral water, an oil-in-water emulsion, a carbohydrate matrix and a complex matrix containing lipids and carbohydrates) were measured at 37 °C for four flavour compounds. Carbohydrate matrix and complex matrix were elaborated to have a similar rheological behaviour. Flavour compounds belonging to the strawberry flavour note were chosen: a homologous series of ethyl esters (C4, C6 and C8) and a ketone (C5). The influence of the nature of flavour compounds on the kinetics of release was studied. On the other hand, the influence of the composition of the matrix on the kinetics of release was pointed out. Fr…

Effect of environmental humidity and coating on aroma transfer through treated papers

2012

Abstract Coupled transfers of aroma compounds and water vapour were investigated by varying the relative humidity gradient of storage (50% or 90%) of two paper packaging at 25 °C. These papers differed in their coating surface: both were identically impregnated then supercalendered, and only one was twice coated on both sides with a synthetic barrier substance. Permeability and solubility coefficients were determined. The coating treatment was more effective to decrease the permeabilities of water vapour and ethyl ester than the effect of RH. On the contrary, the RH modified the water content of the treated papers and affected more strongly their permeability and solubility to cis-3-hexenol…

Effects of heat treatment and acid-induced gelation on aroma release from flavoured skim milk

2010

Abstract Time dependent aroma release was studied in skim milk, heated skim milk as well as in acid-induced gels derived from them using static headspace – gas chromatography analysis. A variable order kinetic model was fitted to experimental data and was used to determine headspace equilibrium concentration and initial rates of release. When compared to water, retention in milk based matrices was increased for hydrophobic aroma compounds, while it was decreased for more hydrophilic volatiles. Acid gelation reduced the initial rate of aroma release by a factor varying from 2.0 to 3.8, depending on the compound. Positive deviation from the first order kinetics was observed and suggests that …

Multiple Mass Transfers of Small Volatile Molecules Through Flexible Food Packaging

2007

This article deals with evolution of packed foodstuff quality with time of storage. The transport of small volatile molecules (flavor compounds, water vapor, and gases) into and through flexible food packaging materials is reviewed, as well as their multiple transfers. Sorption, diffusion, and permeation phenomena are distinguished. Transport properties are largely determined by packaging characteristics, flavor molecules properties, food matrix composition, and environmental conditions. Transfer of small volatile molecules into and through food packaging materials can modify food quality and properties of the packaging materials, thus possibly altering packed foodstuff shelflife. More rese…

Influence of the food matrix structure on the retention of aroma compounds.

2000

The retention of the aroma compounds in a multicomponent medium like the food matrix is influenced by their affinity with the protein when lipid is present at a low level (0.5%). The effect of the structure of the media is also studied by using two media with the same composition; one was emusified, and the other was not. Among the studied aroma compounds, 2-nonanone and isoamyl acetate present opposite behaviors: the volatility of isoamyl acetate is not affected by the change of the medium structure whereas that of 2-nonanone increases. The decrease of retention of 2-nonanone in an emulsified system would be due to a modification of the fixation site for this compound on the protein or to …

Aroma behaviour during steam cooking within a potato starch-based model matrix.

2012

To help understand the organoleptic qualities of steam cooked foods, the kinetics of aroma release during cooking in a potato starch based model matrix was studied. Behaviour of components having a major impact in potato flavour were studied using solid phase micro extraction-gas chromatography (SPME-GC). Evolution of microstructure of potato starch model-matrix during steam cooking process was analyzed using environmental scanning electron microscopy (ESEM). Both aroma compounds that are naturally present in starch matrix and those that were added were analyzed. Both the aroma compounds naturally presented and those added had different behaviour depending on their physico-chemical properti…

Diffusion of small molecules in edible films: Effect of water and interactions between diffusant and biopolymer

2008

Mass transfers of various molecules in multiphasic food products lead to quality modification and thus require the use of edible films or coatings in-between the foodstuff. Consequently, it is important to assess the barrier properties and efficiencies of edible films as well as to determine the diffusivities of the migrants. Translational diffusion of a reference molecule such as fluorescein, determined by the fluorescence recovery after photobleaching (FRAP) method, displays a threshold of a critical water content inducing an increase of the molecular mobility, and demonstrates that multiple populations of a single molecular specie can be involved in different diffusion kinetics. Further …

Experimental and estimated saturated vapour pressures of aroma compounds

1999

Abstract The saturated vapour pressure of d-linalool, 2-nonanone, d-limonene and isoamyl acetate were measured using a static method at different temperatures from 223 to 468 K. From the experimental values, Antoine's constants were determined to enable the calculations of the saturated vapour pressures at a given temperature. The saturated vapour pressure of the four aroma compounds at 298 K were respectively 27, 59, 200 and 733 Pa. These results were compared with those obtained using different estimation methods (Antoine–Grain, Watson, Lee–Kesler, Gomez–Thodos, Grain and Mackay). Gomez–Thodos' model was found to be the most accurate method for the estimation of the saturated vapour press…

Molécules aromatisantes et sapides

2012

National audience

Sorption of n-hexane in amorphous polystyrene

2014

Sorption properties of pure n-hexane vapor in amorphous polystyrene (PS) were studied at 298 K by thermogravimetry under controlled vapor pressure. Two sorption-desorption cycles were performed by varying the relative pressure between 0 and 0.91. Mixing of PS with n-hexane resulted in a strong plasticization, which was evidenced by quite significant depression in the glass transition temperature of the polymer as shown by differential scanning calorimetry. Maximum quantity of n-hexane sorbed in the PS at 298 K and at a pressure close to saturation was about 12.4 wt %. The thermogravimetry yielded an isotherm with a strong hysteresis loop, explanation of which was hypothesized with the help …

Transfer of aroma compounds in water-lipid systems: binding tendency of beta-lactoglobulin.

1998

Interactions of volatile aroma compounds with protein in aqueous solutions, especially whey proteins, have received significant attention in recent years. This work attempts to improve our understanding of the mass transfer in multiphasic systems, such as emulsions at the lipid−water interface, and to reveal the role of β-lactoglobulin in the release rate of solutes. For this purpose the rotating diffusion cell has been used. From a practical point of view it enables evaluation of the transfer through the aqueous phase, through the oil and the interfacial transfer. The effect of β-lactoglobulin, medium pH, and solute concentration has been investigated. Benzaldehyde and 2-nonanone have been…

Structure and thermal properties of a chitosan coated polyethylene bilayer film

2012

The thermal and the structural properties of chitosan coated polyethylene (PE) films were studied. The coating process did not significantly influence the thermal stability and the PE surface structure and/or composition of the polyolefin. Dehydration temperature of chitosan films reflected the strength of water/acetic acid/chitosan chains interactions. Glycerol, used as a plasticizer, formed new hydrophilic centres in the film matrix. Moreover it was better integrated in the CSEGLY than in CSAGLY network. Besides, the addition of a plasticizer in the chitosan films decreased the film degradation temperature. There were two main steps for the PE chitosan coated films degradation. The first …

Influence of the physical state of water on the barrier properties of hydrophilic and hydrophobic films.

2000

Water transfer through different films, as a function of the physical state of water in contact with the film, the relative humidity difference, and the water vapor pressure difference, was investigated. The films were two synthetic packagings (hydrophobic polyethylene and hydrophilic cellophane) and an edible film. The physical state of water affects water sensitive films, such as cellophane, inducing a higher liquid water transfer due to interactions with the polymer. For hydrophobic polymers, such as polyethylene, neither the physical state of water nor the relative humidity has an influence on the water permeability. In complex system, such as an edible film composed of hydrophilic part…

Transfer of Water and Active Molecules at the Interfaces in Complex Food Systems: Theoretical and Practical Aspects

2011

Abstract During processing, storage and consumption, mass transfer of various molecules (water, gases, flavour compounds or other solutes) occur between the different phases in complex food products, and/or also between the complex food and its surroundings. These mass transfers can lead to physical and/or chemical changes and thus induce food quality modifications. The objective of this presentation is to better understand the behaviour of small molecules at the interfaces, especially in model heterogeneous food systems. Different techniques have been developed to characterize their properties and their impact on the mass transfers. Particularly, techniques such as rotative diffusion cell …

Gases in Agro-food Processes

2019

Gases in Agro-food Processes is the ultimate reference covering all applications of gases in agro-Food processes, from farm to fork. Divided into 11 sections, the book covers chemical and physical gas properties, gas monitoring, regulation, heat and mass transfers. Sections are dedicated to agriculture and food processing, wastewater treatment, safety applications and market trends. Users will find this to be a valuable resource for industrial scientists and researchers in technical centers who are developing agro-food products. In addition, the book is ideal for graduate students in agro-food science, chemistry and the biosciences.

Modified arabinoxylan-based films

2004

Abstract Oxygen plasma and electron beam irradiation were used to graft hydrophobic substances and by this way, to reduce water vapor permeability (WVP) of arabinoxylan-based (AX-based) films. Stearyl acrylate (SA) and stearyl methacrylate (SM) were used as reactive monomers. The homogeneous AX-based films, which were pre-activated by oxygen plasma and impregnated with a solution of SA before being exposed to an electron beam (EB), had contact angles that increased from 71° (untreated films) to 122° (treated films). A decrease of about 24% in the WVP was obtained and new chemical groupings were observed on the FTIR spectra of these films. Acrylate monomers were also dispersed into the arabi…

Saturated vapour pressure of aroma compounds at various temperatures

2004

Abstract The aim of this study was to determine experimentally the vapour pressures of aroma compounds at various temperatures, especially at negative ones. The aroma compounds were: acetone, 2-butanone, 2-hexanone, 2-octanone, ethyl acetate, ethyl butanoate, ethyl hexanoate, n-hexanal, n-hexanol and γ-hexalactone. The technique used was a static device where vapour pressure was measured at equilibrium. The temperatures of analysis varied from −40 to 25 °C. Volatility of a pure compound depends on characteristics such as length of the aliphatic chain, the functional group and temperature. Among an homologous series, volatility increases when the aliphatic chain decreases and when temperatur…

Edible films and coatings: tomorrow's packagings: a review.

1998

(1998). Edible Films and Coatings: Tomorrow's Packagings: A Review. Critical Reviews in Food Science and Nutrition: Vol. 38, No. 4, pp. 299-313.

Colon-specific drug delivery: Influence of solution reticulation properties upon pectin beads performance.

2006

In this study, pectinate gel beads were produced by ionotropic gelation method with different solutions of cross-linking agents and ketoprofen was entrapped as model drug. The influence of these formulation parameters was investigated upon bead properties and upon their performance to target the colon. Zinc pectinate beads obtained with 10% of counter-ions solution at pH 1.6 exhibited the strongest gel network due to "egg-box" dimmer formation helped by hydrogen bonding. Furthermore the gel network formed at low pH was arranged in a compact three-fold conformation. Thus, this matrix structure in enteric capsules induced the lowest drug release in the upper gastro-intestinal tract (pH 1.2 fo…

Study of the retention and release of n-hexanal incorporated into soy protein isolate–lipid composite films

2010

[EN] This work deals with the study of the kinetic of aroma release, which had been previously incorporated into soy protein isolate (SPI)-lipid composite films. The aim was to determine the influence of type and amount of lipidic material on aroma (n-hexanal) release and retention, as well as the apparent diffusion coefficients. To carry out this study it have been employed SPI-based films containing two SPI:LIPID ratios (1:0.25 and 1:0.5), and two types of lipids, oleic acid (OA) and beeswax (BW), in OA:BW ratios 100:0, 70:30, 50:50, 30:70 and 0:100. The measurements were performed by a gas chromatography technique. The films that showed more retention were SPI:LIPID 1:0.5 100% BW and con…

Wetting properties at the surface of iota-carrageenan-based edible films

2006

International audience; Surface properties of edible films composed of a polymeric matrix of carrageenan in association with hydrophobic material were studied by contact angle measurements. The use of this technique not only in a static mode but also in a dynamic way enables investigation of surface hydrophobicity as well as surface wettability. The absorption flux inside the material can be estimated from the wetting kinetic, which can be very useful to quickly compare water barrier efficiency of the tested films. Comparison of carrageenan films with films containing known amounts of additives enables understanding and correlation of changes of the surface properties with the nature of use…

Physico-Chemical Interactions in the Flavor-Release Process

2017

The perception of flavor is induced by the release of aroma compounds in the vapor phase. The olfactory perception is not only related to the nature of aroma compounds initially present in the food, but also to their distribution between the different phases. After a description of the interactions established between the aroma compounds and different constituents of food, this chapter looks at physico-chemical characteristics of aroma compounds and at the composition and properties of food matrices. Then, in order to understand the behavior of aroma compounds in the matrices, study methods of interactions are described. The assessment of the release is done by determining the partition coe…

Aroma transfers in and through plastic packagings: orange juice andd-limonene. A review. Part I: Orange juice aroma sorption

1997

Orange juice and one of its major volatile constituents, d-limonene, were probably amongst the first food products to be thoroughly studied. Yet, no extensive literature review has been undertaken in order to obtain a general and accurate description of the sorption and diffusion phenomena. This review underlines the effects of packaging on the organoleptic quality of citrus juices; it therefore presents a focused interest on d-limonene mass transfer experimental results with a variety of plastic polymers. Part I deals with first, loss of organoleptic quality of orange juice during storage and d-limonene sorption is discussed. Second, generalites are presented concerning volatiles transfer …

Influence of temperature and NaCl on the release in aqueous liquid media of aroma compounds encapsulated in edible films

2012

This work analyses the release of n-hexanal and D-limonene from edible films, previously encapsulated in the iota-carrageenan matrix (with and without lipid). Both volatile compounds have different physicochemical properties. The effect of temperature (25 degrees C and 37 degrees C) and dissolution medium (water and 0.9% NaCl) on the release and retention of aroma compounds were studied. Hydrophobicity and wettability properties of active iota-carrageenan films were also studied and they were related with the internal and surface microstructure of films. Results highlight that D-limonene is encapsulated in the lipid phase of the films decreasing the release in the salt medium. D-limonene, t…

Antioxidants and Bioactive Compounds in Food: Critical Review of Issues and Prospects

2022

International audience; This review paper gives an insight into the effective delivery mechanisms for health-promoting substances and highlights the challenges of using antioxidants and bioactives in foods. The selection criteria for choosing bioactives and their extraction in bioavailable form with their adequate incorporation techniques and delivery mechanisms are covered. Moreover, an overview of existing methods for determination of bioactivity is given. The importance of scientifically evaluating the effects of foods or food components on consumer health before making claims about the healthiness is aligned. Finally, a scientific perspective on how to respond to the booming demand for …

Translational diffusion coefficients of volatile compounds in various aqueous solutions at low and subzero temperatures.

2005

International audience; Translational diffusion coefficients (D(12)) of volatile compounds were measured in model media with the profile concentration method. The influence of sample temperature (from 25 to -10 degrees C) was studied on translational diffusion in sucrose or maltodextrin solutions at various concentrations. Results show that diffusivity of volatile compounds in sucrose solutions is controlled by temperature, molecule size, and the viscosity of the liquid phase as expected with the Stokes-Einstein equation; moreover, physicochemical interactions between volatile compounds and the medium are determinant for diffusion estimation. At negative temperature, the winding path induce…

Influence of alginate emulsion-based films structure on its barrier properties and on the protection of microencapsulated aroma compound

2009

In recent years the use of natural polymers coming from renewable sources has greatly increased due to the over-solid packaging waste and dwindling petroleum reserves. Biopolymer films, which contain both lipid and polysaccharide ingredients to form complex packaging enable us to obtain edible films with good mechanical and water barrier properties as emulsified alginate edible films. Moreover, these can be considered to encapsulate active molecules as flavours. The aim of this work is to better understand the influence of the composition and the structure of the film matrix on its barrier properties and thus on its capacity to protect encapsulated active substances. Granulometry, Different…

Thermodynamic and kinetic aspects of the transport of small molecules in dispersed systems

1998

Abstract The knowledge of the behaviour of flavour compounds in complex multiphase systems with regard to their structure is of great importance in flavour perception of foods. The thermodynamic and kinetic behaviour of three selected flavour compounds belonging to a homologous series of esters, e.g. ethyl acetate, ethyl butanoate and ethyl hexanoate, were studied in simple and multiphase systems. The liquid system was composed of water (with or without sodium caseinate) and/or a lipid, Miglyol. First, the properties of the solutes were determined by means of their liquid–liquid partition at equilibrium and their diffusion in aqueous or lipid phases. This first step allowed to reveal the im…

Effect of Oxidized Potato Starch on the Physicochemical Properties of Soy Protein Isolate-Based Edible Films

2013

The influence of oxidized starch on the physicochemical properties of cast soy protein isolate films is determined in this study. Films were cast from heated (70 °C for 20 min) alkaline (pH=10) aqueous solutions of 7 % soy protein isolate containing 50 % (by mass) glycerol as a plasticizer and different levels of added oxidized starch (0, 5, 10, 15, and 20 %, by mass). For all types of films, opacity, contact angle, tensile strength, elongation at break, water vapour permeability, measured at 25 °C for four relative humidity differentials (30–53, 30–75, 30–84 and 30–100 %), differential scanning calorimetry and microstructure were determined after conditioning film specimens at 25 °C and 30…

Flavor release from complex food systems

2008

International audience

Methylcellulose-Based Edible Films and Coatings:  2. Mechanical and Thermal Properties as a Function of Plasticizer Content

1997

Several edible films based on methylcellulose and polyethylene glycol 400 (PEG400) were prepared and stored until equilibration at different relative humidities. Tensile stress−strain curves show very different behaviors as a function of PEG400 and relative humidity. Tensile strength strongly depends on relative humidity and then on water content, more than on PEG400 content. On the contrary, elongation is dependent both on water and PEG400. These differences correspond to the glass transition of the polymer, which affects the elongation more than the tensile strength. However, from DSC measurements, it appears that the PEG400 has no or a very low compatibility with the methylcellulose matr…

Aroma Volatility from Aqueous Sucrose Solutions at Low and Subzero Temperatures

2004

International audience; The gas-liquid partition coefficients of ethyl acetate and ethyl hexanoate have been measured in water and aqueous sucrose solutions from 25 to -10 degrees C by dynamic headspace. Experiments were carried out on sucrose solutions at temperatures where no ice formation was possible. Results showed that when sucrose concentration increased, aroma volatility increased except for ethyl hexanoate and in the highest sucrose concentration solution (57.5%). A quasi-linear temperature decrease on aroma volatility was observed in sucrose solutions from 25 to around 4 and 0 degrees C. Then, from 0 to -10 degrees C, aroma volatility did not decrease: ethyl acetate volatility rem…

The effect of glycerol on the perceived aroma of a model wine and a white wine

2001

Abstract Glycerol is one of the most abundant components of wine. In dry wines its concentration is only exceeded by water and ethanol. Several studies have been carried out on the effects of glycerol on mouthfeel, but little attention has been given to glycero–flavour interactions. Consequently, here we have turned our attention to the aroma perception. Purge and Trap analysis and sensory measurements were used to investigate the modifications in volatility of aroma compounds in model solutions and white wine according to their glycerol concentration. In water, the amount of aroma compounds released was not affected by the presence of glycerol concentrations ranging from 5 to 50 g/L. The a…

Water vapour pressure above saturated salt solutions at low temperatures

1999

Abstract The properties of water–salt systems in relation to their vapour pressure are studied especially at low temperature. The water vapour pressure of saturated salt solutions of strontium chloride, zinc chloride, nickel chloride, nickel nitrate, magnesium chloride, magnesium bromide, magnesium nitrate, calcium chloride, potassium nitrite, lithium chloride, lithium bromide, lithium iodide and sodium bromide are measured in a temperature range −40 to +10°C. The apparatus used in this study, is well adapted to measure very low pressure with an uncertainty of pressure measurement of 2% for a range between 10−3 and 10 mm Hg. The experimental values are fitted by Antoine equation with mean p…

Sodium Chloride and Magnesium Chloride affected by Ripening of Camembert Cheese

1993

Ripening of cheese with three kinds of salt treatment was studied using MgCl 2 , NaCl or a mixture of the two. Proteolysis was followed by determination of TCA-soluble nitrogen and quantitative electrophoresis. A rapid one-step method for free fatty acids was used to determine short and long-chin fatty acids. In the presence of magnesium, proteolysis increased, even with NaCl, which seemed to delay the magnesium activation. Lipolysis was retarded by NaCl, which decreased the level of free fatty acids. An imbalance between proteolysis and lipolysis could be responsible for the unpleasant flavor of the cheese containing both MgCl 2 and NaCl

Aroma transfers in and through plastic packagings: orange juice andd-limonene. A review. Part II: overall sorption mechanisms and parameters—a litera…

1997

Nowadays, the quality of foodstuffs has more than ever included the notion that packaging1 contact is not always wholesome. It can alter the packaged food product by flavour scalping and can also affect the food by off-flavour release. Much research has been carried out to better understand the mass transfers involved with various synthetic polymeric films. Orange juice and one of its major volatile constituents, d-limonene, were probably amongst the first food products to be thoroughly studied. Yet, no extensive literature review has been undertaken in order to obtain a general and accurate description of the sorption and diffusion phenomena. This review underlines the effects of packaging…

Retention of aroma compounds by carbohydrates: Influence of their physicochemical characteristics and of their physical state a review

1998

Many aroma compounds, used to flavor food products, are used in a solid state, after encapsulation. Carbohydrates are the most common matrices used to entrap these volatiles. It has been observed that depending on the aroma compound and the carrier, efficiency can vary. This article reviews the influence of physicochemical properties of both the volatiles and the carriers on retention. The latter depends on the functional groups of the aroma compound. Moreover, it increases with molecular weight and decreases with the polarity and relative volatility of the aroma compound. This behavior can be explained by the effect of these properties on the diffusion of the aroma compound through the mat…

Physico-chemical interactions between starch and aroma compounds and their effects on aroma retention in food like matrices

2002

International audience

Effect of surfactants and drying rate on barrier properties of emulsified edible films

2007

Summary The effects of globule size, nature and concentration of surfactant, and drying duration of water vapour transmission rate and tensile strength of emulsified edible barriers containing methylcellulose and paraffin wax, were measured. of the six surfactants tested, 0.6% purified glycerol monostearate (GMS) produced films with the lowest water vapour transmission rates and the highest mechanical resistance. Longer drying times of film-forming emulsions produced better barrier and mechanical properties. Control of the film forming emulsion stability allowed the reduction of the water vapour transfer rate by an order of magnitude.

Application of headspace analysis to the study of aroma compounds-lipids interactions

1998

Taking into account interactions between aroma compounds and food components is necessary to better manage the flavoring of food products. These interactions occur at a molecular level and reflect changes, at a macroscopic level, in thermodynamic equilibria, such as solubility or volatility. The rate of transfer of an aroma compound from the liquid to the vapor phase can be affected as well. The behavior of aroma compounds in water and lipid solutions was studied in two complementary ways, a thermodynamic and a kinetic approach (head-space analysis). The transfer rate of volatiles at the liquid-water interface does not only depend on the hydrophobicity of the aroma compounds. Vapor-liquid p…

The chemodiversity of wines can reveal a metabologeography expression of cooperage oak wood

2009

Wine chemical compositions, which result from a complex interplay between environmental factors, genetic factors, and viticultural practices, have mostly been studied using targeted analyses of selected families of metabolites. Detailed studies have particularly concerned volatile and polyphenolic compounds because of their acknowledged roles in the organoleptic and therapeutic properties. However, we show that an unprecedented chemical diversity of wine composition can be unraveled through a nontargeted approach by ultrahigh-resolution mass spectrometry, which provides an instantaneous image of complex interacting processes, not easily or possibly resolvable into their unambiguous individu…

Measurement of transport phenomena of volatile compounds: A review

2008

International audience; Measurement of the transport phenomena of volatile compounds is a central preoccupation in food flavour and is the subject of the present paper. After a theoretical reminder concerning transport phenomena, the methods used for the measurement of diffusion and mass transfer of volatile compounds are described with their principles, main advantages and drawbacks. These methods are illustrated by some results obtained for flavoured model food products.Several methods characterized by the type of diffusion coefficient measured, the method basis, the scale at which diffusion is measured and the means used to detect the diffusing molecule, are available to determine diffus…

Liquid and vapour water transfer through whey protein/lipid emulsion films

2010

BACKGROUND: Edible films and coatings based on protein/lipid combinations are among the new products being developed in order to reduce the use of plastic packaging polymers for food applications. This study was conducted to determine the effect of rapeseed oil on selected physicochemical properties of cast whey protein films. RESULTS: Films were cast from heated (80 °C for 30 min) aqueous solutions of whey protein isolate (WPI, 100 g kg−1 of water) containing glycerol (50 g kg−1 of WPI) as a plasticiser and different levels of added rapeseed oil (0, 1, 2, 3 and 4% w/w of WPI). Measurements of film microstructure, laser light-scattering granulometry, differential scanning calorimetry, wetti…

Tracer aroma compound transfer from a solid and complex-flavored food matrix packed in treated papers or plastic packaging film.

2007

The objective of this work was to study the transfer of four aroma compounds (ethyl butyrate, ethyl hexanoate, cis-3-hexenol, and benzaldehyde) from a solid and complex-flavored food matrix (sponge cake) toward and through packaging films placed in indirect contact during storage in accelerated aging conditions (38 °C and 86% relative humidity gradient). The efficiency of treated papers relative to that of standard paper and plastic as barrier was tested. Before storage, aroma compound volatility in the sponge cake was measured, and similar values were found between aroma compounds, due to the fat content of the sponge cake. Whatever the aroma compound, permeability values during storage we…

Utilisation of pectin coating to enhance spray-dry stability of pea protein-stabilised oil-in-water emulsions

2010

International audience; In this study, development of pea (Pisum sativum) protein stabilised dry and reconstituted emulsions is presented. Dry emulsions were prepared by spray-drying liquid emulsions in a laboratory spray-dryer. The effect of drying on the physical stability of oil-in-water emulsions containing pea protein-coated and pea protein/pectin-coated oil droplets has been studied. Oil-in-water emulsions (5 wt.% Miglyol 812 N, 0.25 wt.% pea protein, 11% maltodextrin, pH 2.4) were prepared that contained 0 (primary emulsion) or 0.2 wt.% pectin (secondary emulsion). The emulsions were then subjected to spray-drying and reconstitution (pH 2.4). The stability of the emulsions to dry pro…

Role of Wood Macromolecules on Selective Sorption of Phenolic Compounds by Wood

2008

Wood is a complex structure of various macromolecules, mainly cellulose, hemicellulose, and lignin. Although the sorption process of some organic compounds by wood has been elucidated, the relative contribution of its different fractions in the sorption mechanism is not clearly determined. Certain works predict the amount of organic compounds sorbed on wood as a direct relationship to its lignin fraction. All wood macromolecules, however, seem to have the capacity to sorb organic compounds. Sorption of phenolic compounds on individual wood macromolecules has been studied and compared to that on wood. Wood-water partition coefficients ( K wood) for phenolic volatiles and their sorption rates…

The Schroeder paradox or how the state of water affects the moisture transfer through edible films

2012

The objective of this work was to better understand the water permeation through edible films when water is either in its vapour or in its liquid state related to their physico-chemical properties. Film based on iota-carrageenans or sodium alginate, containing or not fat, and encapsulating or not an aroma compound (n-hexanal) have been prepared. Films were conditioned at three different relative humidities, 0%, 43% and 84%. The incorporation of the n-hexanal in both types of biopolymer modifies the mechanical properties of film matrix and has a synergistic effect when associated to fat. Increasing the moisture content induces film plasticization by decreasing the glass transition of the gly…

Properties of spray-dried food flavours microencapsulated with two-layered membranes: Roles of interfacial interactions and water

2012

International audience; Engineering the interface of oil-in-water emulsion droplets with biopolymers that modify its permeability could provide a novel technique to improve flavour retention in dry powders. The objective of this study was to determine if volatile compounds were more retained in dry emulsions stabilized by pea protein isolate (PPI)/pectin complex than that stabilized by PPI alone. The retention of ethyl esters during spray-drying increased with decreasing volatility of the encapsulated compound and ranged from 28% to 40%. The addition of pectin to feed emulsions was quite effective in markedly improving the retention of the three studied flavour compounds. In our previous wo…

Influence of thermal process on structure and functional properties of emulsion-based edible films

2007

Abstract Synthetic food packaging is classically used to prevent mass transfer of various small molecules (water, gases, flavour compounds or solutes) between a food and its surrounding medium. In the case of composite foods, the development of edible films and coatings, applied between the different phases of this food is rising up. The increase of such food products shelf-life is indeed related to the barrier efficiency of these edible packaging against small molecules transfers. This is especially true for water transfer between compartments of different water activities in the same food, that leads to important physico-chemical changes and therefore to food quality deterioration. Film-f…

Physicochemical properties of vanilla and raspberry aromas microencapsulated in the industrial conditions by spray drying

2018

International audience; Physicochemical properties of powdered vanilla and raspberry complex aromas obtained on industrial conditions by spray drying were investigated. Powders had low water content and activity, promoting long shelf‐life. Aroma retention was lower for vanilla flavors. Raspberry powdered flavors had poorer flowability, lower bulk density, lower particle size, and higher Tg. Additionally, physicochemical properties of powders from various locations of spray dryer (cyclone container/chamber) were compared—powders from the cyclone had higher water content and activity, but the flowability was not affected by collection place. Aromatic substances’ retention of raspberry flavors…

Wine Oxidation and the Role of Cork

2009

The present review aims to show the state of the art of oxidation mechanisms occurring especially in white wines by taking into account knowledge from different fields in relation to the subject. It is therefore divided into three main parts. First, the mechanisms of oxidation relevant to white wine are discussed in the light of recent scientific literature. Next, the phenomenon of oxygen solubility in wine during the winemaking process, and in particular during bottling is stated theoretically as well as practically. Finally, the aspect of wine conservation after bottling is examined with respect to mass transfers which may occur through the closure, with a special emphasis on cork. Curren…

Change in the aroma quality of a sponge cake during storage in flexible packaging films evalued by D-GC-O

2006

Interactions between volatiles and lipids in complex systems

1998

Partition equilibria of three aroma compounds in three different biphasic systems were studied by a liquid/liquid partition technique to investigate interactions that occur between volatiles and lipids in biphasic solutions. The lipids used were linoleic acid and ricinoleic acid and tetradecane as a model. The three aroma compounds were ethyl acetate, 2,5-dimethylpyrazine, and oct-1-en-3-ol. The results showed that the intermolecular forces involved were weak. Infrared spectroscopy was then performed on binary systems (tetradecane and linoleic acid or aroma compound) and on ternary systems (tetradecane, linoleic acid, and aroma compound) to determine the nature of the interactions. This met…

Flavour release from pectin gels : effect of texture, molecular interactions and aroma compounds diffusion

2002

Des systemes modeles de confiture a teneurs croissantes en pectine ont ete developpes afin d'observer la liberation d'arome par des matrices gelifiees a tres faible concentration en hydrocolloide. L'addition de pectine modifie la liberation des composes d'arome les plus volatils et hydrophobes. Ce phenomene est strictement lie a la formation d'un reseau gelifie qui, meme a une concentration de 0,1 % en pectine, cause une diminution de la mobilite des composes volatils. Aucune interaction moleculaire specifique n'a ete observee entre composes d'arome et pectine. De plus, il n'y a pas de difference significative entre les coefficients de diffusion des differents composes d'arome, et ce, pour …

Pervaporation : an efficient process for benzaldehyde recovery in fermentation broth

1995

National audience

Water barrier properties of treated-papers and application to sponge cake storage

2006

Abstract Water barrier properties of three treated papers and of one plastic film were compared and the potential of these packaging films to prevent moisture loss from a sponge cake during storage in standard conditions (25 °C and 50% relative humidity gradient) was evaluated. Sorption isotherms were established at 25 °C for both sponge cake and papers, from which diffusivity values in papers were determined for the whole range of A w . Permeability of packaging films was determined in standard conditions. Water sorption was close for all papers, regardless of their treatment, whereas water diffusivity was reduced by coating or calendering. Water vapor permeability in papers was controlled…

Barrier properties of chitosan coated polyethylene

2012

The transfer properties of chitosan coated polyethylene (PE) films were studied. The barrier properties of non coated PE were not affected by relative humidity changes. The presence of the hydrophilic chitosan layer acted as a water reservoir on the polyethylene film surface which significantly promoted its sensitivity to the water vapour. The water vapour permeability increased 1.85 times at a higher RH. Coated PE films showed more than two-order decrease in the oxygen permeability (PO2) and three-order-decrease in the carbon dioxide permeability (PCO2). When the chitosan coated PE surface was exposed to the water vapour, the PO2 and the PCO2 were significantly increased. However, the perm…

Influence of the composition and the structure of different media on the release of aroma compounds

2004

International audience; The release of 2-nonanone and hexenol (hex-4-en-3-ol) was studied in model media with different structures and compositions: water, a gel of $\beta$-lactoglobulin, gelified or non-gelified emulsions (5.0% Miglyol, 6.9% $\beta$-lactoglobulin; the gelation was realized by heating) and milk. The aroma compounds were analyzed by gas chromatography. A strong influence of the nature of the volatile compound on its behavior towards the food matrix was observed: in the case of 2-nonanone, a hydrophobic compound (log P = 2.9) with a relatively high vapor-water partition coefficient (Kmol = 33.6), the release was greatly influenced by the composition and the structure of the m…

Expressing forest origins in the chemical composition of cooperage oak woods and corresponding wines by using FTICR-MS.

2008

A non-targeted, ultra-high-resolution mass spectrometric, direct analysis of oak-wood extracts from two species (Quercus robur L. and Quercus petraea Liebl.) from three French forests, and of a wine aged in barrels derived therefrom has been performed to identify families of metabolites that could discriminate both the species and the geographical origin of woods. From 12 T ultra-high-resolution Fourier transform ion cyclotron resonance mass spectra of wood extracts, hundreds of mass signals were identified as possible significant biomarkers of the two species, with phenolic and carbohydrate moieties leading the differentiation between Q. robur and Q. petraea, respectively, as corroborated …

Interaction Mechanisms between guaiacols and lignin: the conjugated double bond makes the difference.

2011

Lignin is considered to be responsible for a selective sorption of phenolic compounds on wood. In order to investigate the mechanisms involved, two similar guaiacol compounds--only differing by the nature of the para side chain--were adsorbed on oak wood extracted lignin. Vapor sorption-desorption isotherms indicated that about 3.5 wt % of 4-vinylguaiacol is adsorbed near saturation whereas it is only 0.8% for 4-ethylguaiacol. For both compounds, the isotherms displayed a hysteresis though significantly greater for 4-vinylguaiacol. Analyses of the hydroxyl stretching region of FTIR spectra of the lignin/4-ethylguaiacol and lignin/4-vinylguaiacol complexes indicated that physisorption via hy…

Behavior of Flavor Compounds in Model Food Systems:  a Thermodynamic Study

2003

Physicochemical parameters, such as hydrophobicity, water solubility, and volatility, of four flavor compounds (ethyl acetate, ethyl butyrate, ethyl hexanoate, and 2-pentanone) were determined. The amount of flavor compounds released from different model matrices (mineral water, purified triolein, an oil-in-water emulsion, a carbohydrate matrix, and a complex matrix containing lipids and carbohydrates) into the gaseous phase was determined at thermodynamic equilibrium, at 37 degrees C, by static headspace gas chromatography. The degree of interaction between the flavor compounds and the matrix components was shown by measuring the percentage retention using the water matrix as the reference…

Effect of fat content on odor intensity of tree aroma compounds in model emulsions : delta-decalactone, diacetyl, and butyric acid

1996

International audience

Interactions between aroma and edible films. 1. Permeability Of methylcellulose and low-density polyethylene films to methyl ketones.

1998

This work contributes to the study of aroma transfers through edible and plastic packaging films. Permeability, sorption, and diffusivity of three methyl ketones (2-heptanone, 2-octanone, and 2-nonanone) in and through low-density polyethylene and methylcellulose-based edible films have been determined. Permeability was measured using a dynamic method coupled with a gas chromatograph. The methyl ketone permeability of polyethylene films mainly depends on diffusivity of the penetrant in the polymer. In the case of 2-heptanone, a saturation of the polymer network is observed at high vapor concentrations. The formation of clusters could take place when concentrations are higher in the vapor ph…

Retention of aroma compounds by lactic acid bacteria in model food media

2008

The interactions between aroma compounds and other particles in foods, particularly with macromolecules, have been greatly studied in order to better understand the binding of flavors in food matrices. Bacteria possess many macromolecules on their cellular surface that provide them surface properties which are involved in the physicochemical interactions between cells and interfaces. However, the interactions between bacteria and aroma compounds have not received so much attention despite the presence of bacteria in many fermented products. In order to study the retention of aroma compounds by bacteria, we have investigated the retention of esters by lactic acid bacteria with static headspa…

Influence of flavour transfer between different gel phases on perceived aroma

2007

International audience; Multiphasic models of stirred fruit yoghurts made from a bilayer that consisted of a pectin and a dairy gel were developed in order to study the transfer of strawberry flavour compounds between the two phases. Several parameters (i.e., the flavour concentration, the fat content of the dairy gel and the storage temperature) affecting flavour compound transfer, using an experimental design, together with their effect on sensory perception were investigated. Strawberry flavour transfer between the two gels was high enough to affect the sensory perception of the dairy gels. The parameters that modified the partitioning of ethyl esters between the pectin and dairy gel (i.…

Ethyl hexanoate transfer in paper and plastic food packaging by sorption and permeation experiments

2008

The barrier properties of one treated paper packaging and one standard plastic film (bi-oriented polypropylene, biOPP) were assessed for ethyl hexanoate. Three methods based either on sorption (gravimetry and micro-atmosphere-derived method) or permeation kinetic determination were used in controlled conditions of aroma vapor concentration (107 Pa), temperature (25 degrees C) and relative humidity (about 0 %). Ethyl hexanoate solubility values were on the same range of magnitude for both packaging films in spite of their different nature and composition. Ethyl hexanoate affinity for both films was well predicted by their respective solubility parameters. Solubility values were different acc…

Effects of the nature and concentration of substrates in aqueous solutions on the solubility of aroma compounds

2005

The solubility of nine aroma compounds (acetone, 2-butanone, 2-hexanone, 2-octanone, ethyl acetate, ethyl butanoate, ethyl hexanoate, n-hexanal, and n-hexanol) in both water and various aqueous solutions was measured at 25 °C using the mutual solubility method. The aqueous solutions consisted of sucrose, glucose, sorbitol, glycerol, polyethylene glycol 200, or maltodextrins at different concentrations. Aroma solubility in water decreased with increased hydrophobicity. For aroma molecules which have the same number of carbon atoms in their structure, aqueous solubility decreased as follows: aldehyde > methyl ketone > alcohol > ethyl ester. When using a group contribution method, the estimate…

Competition between aroma compounds for the binding on beta-cyclodextrins : study of the nature of interactions

1999

International audience