Reproducible optical fiber tips for photon scanning tunneling microscopy with very small (>5°) cone angle

1998

Sharp optical fiber tips for photon scanning tunneling microscopes (PSTMs) have been fabricated by employing a new alternative technique for etching multimode optical fibers. The tip diameter is less than 30 mm, while the cone full-angle can be as sharp as 3/spl deg/. To the knowledge of the authors, such tips are the sharpest reported up to now. Measurements, with 19 tips, of the evanescent wave decay distance produced by frustrated reflection of light on a same sample, show good reproducibility. Furthermore, the PSTM images, taken with the new tips, are very sharp and fit with images of the same sample obtained with an atomic force microscope (AFM).

Imaging of Located Buried Defects in Metal Samples by an Scanning Microwave Microscopy

2011

Abstract A non-destructive method is proposed to detect the located buried defects using scanning microwave microscopy. Based on the “skin effect”, our recent developments authorize 3D tomography with nanometric resolution. This technique associates the electromagnetic microwave measurement using a Vector Network Analyzer (VNA) with the nanometer-resolution positioning capabilities of an Atomic Force Microscope. At each used frequency, an incident electromagnetic wave is send to the sample and the reflected wave gives information on a specific depth layer in the material. With a large bandwidth of frequencies, a 3D tomography is allowed inside the material. With characteristic tools of nano…

Du parchemin à l’ADN : le dialogue entre les sciences historiques et les sciences du vivant

2018

National audience

Effects of temperature and pressure on microcantilever resonance response.

2003

Abstract The variation in resonance response of microcantilevers was investigated as a function of pressure (10 −2 –10 6  Pa) and temperature (290–390 K) in atmospheres of helium (He) and dry nitrogen (N 2 ). Our results for a silicon cantilever under vacuum show that the frequency varies in direct proportion to the temperature. The linear response is explained by the decrease in Young's modulus with increasing the temperature. However, when the cantilever is bimaterial, the response is nonlinear due to differential thermal expansion. Resonance response as a function of pressure shows three different regions, which correspond to molecular flow regime, transition regime, and viscous regime. …

Application of total internal reflexion fluorescence microscopy for studying pH changes in an occluded electrochemical cell: Development of a wavegui…

2006

A device for pH mapping derived from optical sensors similar to total internal reflection fluorescence microscopy (TIRFM) has been developed for future possible applications in the field of localized corrosion. The sensing principle is the increase of the fluorescent yield of the fluorescein with the pH of the medium. The basic principle of this sensor is based on the excitation of a fluorescent silica polymer film of nanometre dimensions, deposited by sol–gel method on a waveguiding layer. The total internal reflexion conditions creates an evanescent wave which interacts with the molecules trapped in the silica layer. A conventional microscope located above the sample collects the fluoresc…

EXPERIMENTAL OBSERVATION OF THE INTERACTION BETWEEN A MICROSCOPIC CATHODE TIP AND ELECTRICAL ARC

2008

Experimental approach of the interaction between a sub-microscopic cathode tip and the plasma

2007

The interaction between electrical arc and cathode represents a crucial problem in the conception of arc jet thrusters, circuit breakers, and plasma torch or arc heaters. At the cathode surface, the current and energy transfers are controlled by the current emitting site (cathodic spot). Theories and experimental observations, at macroscopic and mesoscopic scale, deal with the erosion of the cathodic surface. Under micrometer range, theories refer to the arc root to describe the erosion of the surface. The works presented here propose an original method to evaluate the arc-cathode interaction at micrometric scale. A nanotechnology is used in order to control the roughness of the electrode s…

Kerr and Faraday Rotations of Magneto-Optical Multilayers under the Condition of Total Internal Reflection

1999

Squeezing the Optical Near-Field Zone by Plasmon Coupling of Metallic Nanoparticles

1999

We report on the experimental observation of near-field optical effects close to Au nanoparticles using a photon scanning tunneling microscope (PSTM). Constant height operation of the PSTM allowed an unprecedented direct comparison with theoretical computations of the distribution of the optical near-field intensity. An unexpected squeezing of the optical near field due to plasmon coupling was observed above a chain of Au nanoparticles.

Detection of the optical magnetic field by circular symmetry plasmons

2000

We report on the influence of coating a sharpened optical fiber tip with Au when observing nanofabricated dielectric structures with a Photon Scanning Tunneling Microscope (PSTM) in constant-height mode. For well-defined incident wavelengths and coating thicknesses, we found that such tips detect the distribution of the magnetic field associated with the optical wave in the near-field zone. A simple tip model indicates that this phenomenon is related to the excitation of circular symmetry plasmons in Au coated tips.

The impact of transmembrane mucin and dietary tannins on the electric properties of the oral mucosal pellicle studied by Scanning Microwave Microscopy

2022

Non-destructive technique to detect local buried defects in metal sample by scanning microwave microscopy

2012

International audience; Based on the skin effect, our recent developments using scanning microwave microscopy lead to propose a non-destructive method to detect located buried defect in metal samples like stainless steel. A 3D tomography is possible by taking advantage of microwave measurement, using a vector network analyzer in bandwidth frequencies, and the nanometer resolution positioning capabilities with atomic force microscopy. At each used frequency, an incident electromagnetic wave is sent to the sample and the reflected wave gives information on a specific depth layer in the material. With diagnostic tools of nanotechnologies (SEM. AFM, etc.), different stainless steel samples (fro…

Optical Near-Field Properties of Lithographically Designed Metallic Nanoparticles

1999

ABSTRACTWe report on the experimental observation of localized surface plasmons sustained by small metallic particles using a photon scanning tunneling microscope (PSTM). The surface plasmons are excited in gold nanostructures tailored by electron beam lithography. The constant height operation of the PSTM allowed a direct comparison with theoretical computations of the distribution of the optical near-field intensity. Plasmon coupling above a chain of Au particles and electromagnetic energy transfer from a resonantly excited nanoparticle to a nanowire are demonstrated. Our experimental results appear to be in good agreement with theoretical computations based on the Green's Dyadic Techniqu…

Detection of defects buried in metallic samples by scanning microwave microscopy

2011

This paper reports the local detection of buried calibrated metal defects in metal samples by a new experimental technique, scanning microwave microscopy. This technique combines the electromagnetic measurement capabilities of a microwave vector network analyzer with the subnanometer-resolution capabilities of an atomic force microscope. The network analyzer authorizes the use of several frequencies in the range 1--6 GHz, allowing three-dimensional tomographical investigation, which is useful for the detection of bulk defects in metal materials.

Resolution of the photon scanning tunneling microscope: influence of physical parameters

1992

Abstract The photon scanning tunneling microscope (PSTM) is the photon analogue of the electron scanning tunneling microscope (ESTM). It uses the evanescent field due to total internal reflection (TIR) of a light beam in a prism modulated by a sample placed on the base of the prism. Our experimental results shown details which present a lateral size as small as 200 A. The PSTM axial resolution is more difficult to evaluate. It is a function of the roughness of the sample. For very smooth samples, images shown an axial resolution of about 10 A. At last we discuss how both lateral and axial resolution can be affected by several parameters such as the tip surface distance and the roughness of …

Magneto-optical effects in multilayers illuminated by total internal reflection

1999

This paper describes the magneto-optical effects of metallic multilayers under the condition of total internal reflection. In the framework of Green’s dyadic technique, we detail a practical and at time-consuming scheme to compute accurately the optical properties of anisotropic multilayers deposited on a substrate. We present numerical simulations which account for the variation of the angle of incidence at a fixed wavelength and for the variation of the wavelength at fixed angle of incidence. The Kerr rotation is found to increase significantly around the critical angle for total reflection. We also discuss the importance of plasmon effects in the structure of the Kerr rotation spectra. @…

Changes in surface stress, morphology and chemical composition of silica and silicon nitride surfaces during the etching by gaseous HF acid

2007

Abstract HF acid attack of SiO2 and Si3N4 substrates is analyzed to improve the sensitivity of a sensor based on microcantilever. Ex situ analysis of the etching using XPS, SIMS and AFM show significant changes in the anisotropy and the rate of the etching of the oxides on SiO2 and Si3N4 surface. Those differences influence the kinetic evolution of the plastic bending deflection of the cantilever coated with SiO2 and Si3N4 layer, respectively. The linear dependence between the HF concentration and the Si3N4 cantilever bending corresponds to a deep attack of the layer whereas the non-linear behavior observed for SiO2 layer can be explained by a combination of deep and lateral etching. The ca…

Analysis of photon-scanning tunneling microscope images of inhomogeneous samples: determination of the local refractive index of channel waveguides

1995

Channel waveguides are imaged by a photon-scanning tunneling microscope (PSTM). The polarization of the light and its orientation with respect to the guide axis are shown to be very important parameters in the analysis of the images of such samples. We simulated image formation for the plane of incidence parallel to the axis of the guide. Our theoretical results are qualitatively in agreement with our measurements. These results show the ability of the PSTM to give information about the local refractive-index variations of a sample.

De l'animal au parchemin : histoire, environnement, génétique

2019

National audience; Le parchemin est une peau d’animal minutieusement préparée pour servir de support à l’écriture. Comment élabore-t-on un parchemin ? Qui sont les éleveurs de bétail, les parcheminiers au Moyen-Âge ? Vous le découvrirez grâce aux chartes, registres et partitions musicales exposés.

A mucosal pellicle modifies the physical properties of epithelial

2017

International audience

Direct observation of localized surface plasmon coupling

1999

We report on the direct observation of localized surface plasmon coupling using a photon scanning tunneling microscope. The surface plasmons are excited in gold nanostructures tailored by electron beam lithography. Electromagnetic energy transfer from a resonantly excited nanoparticle to a nanowire, which is not directly excited by the incident light is observed. Our experimental results appear to be in good agreement with theoretical computations based on Green's dyadic technique.

Characterization of optogeometric parameters of optical fibers by near-field scanning probe microscopies

2000

The combination of atomic-force and scanning-near-field optical microscopies is useful for characterizing the physical and optical parameters of optoelectronic devices. With a commercial atomic-force microscope adapted to perform scanning-near-field optical measurements, we succeed in determining core diameters, localizing the erbium doping zone, and analyzing propagation modes in erbium-doped and multimodal optical fibers.

Local detection of the optical magnetic field in the near zone of dielectric samples

2000

International audience; We present a study of the influence of the probe composition on the formation of constant-height photon scanning tunneling microscope images when observing a dielectric sample. Dramatic effects due to the metallization of the tip are presented and discussed in detail. We show how the recorded images can look quite different when the probe is dielectric or coated with gold. Comparison with numerical calculations indicate that the experimental signals are of electric or magnetic nature depending on the composition of the tip. For well-defined conditions, gold-coated tips provide images of the distribution of the magnetic field intensity associated with the optical near…

Development of a new in vitro model of oral mucosa to investigate a new hypothesis on the molecular origin of astringency

2021

Astringency is described as an oral tactile perception occurring during the consumption of tannin-rich foods. This sensation, mediated by the trigeminal nerves, participates negatively to the flavor of foods leading to the rejection of food with high astringency by the consumer. The exact molecular mechanism of its origin and the nature of the sensory receptors activated are still under debate. Up to recently, the main hypotheses involved changes in the lubrication properties of the oral cavity triggering the activation of mechanoreceptors. Recently, we have put a new hypothesis involving the mucin MUC1 forward as an explanation of the origin of astringency. MUC1 is a transmembrane mucin wi…

Infrared nanospectroscopic mapping of DNA molecules on mica surface

2022

Significant efforts have been done in last two decades to develop nanoscale spectroscopy techniques owning to their great potential for single-molecule structural detection and in addition, to resolve open questions in heterogeneous biological systems, such as protein-DNA complexes. Applying AFM-IR technique has become a powerful leverage for obtaining simultaneous absorption spectra with a nanoscale spatial resolution for studied proteins, however the IR-AFM investigation of DNA molecules on surface, as a benchmark for a nucleoprotein complexes nanocharacterization, has remained elusive. Herein, we demonstrate methodological approach for acquisition of IR-AFM mapping modalities with corres…

Nanoscale Mapping of the Physical Surface Properties of Human Buccal Cells and Changes Induced by Saliva

2019

International audience; The mucosal pellicle, also called salivary pellicle, is a thin biological layer made of salivary and epithelial constituents, lining oral mucosae. It contributes to their protection against microbiological, chemical, or mechanical insults. Pellicle formation depends on the cells’ surface properties, and in turn the pellicle deeply modifies such properties. It has been reported that the expression of the transmembrane mucin MUC1 in oral epithelial cells improves the formation of the mucosal pellicle. Here, we describe an approach combining classical and functionalized tip atomic force microscopy and scanning microwave microscopy to characterize how MUC1 induces change…

Imaging of test quartz gratings with a photon scanning tunneling microscope Experiment and theory

1995

We use the differential formalism of the electromagnetic theory of gratings to interpret the images of test sinusoidal or lamellar quartz gratings obtained with a photon scanning tunneling microscope. The period of the grating is 0.5 μm, and the height of the rule is 0.2 μm. It is shown that the images depend strongly on several parameters, such as polarization or angle of incidence, with respect to the ruling direction. A systematic study of the isointensity lines above the gratings as a function of polarization is presented, and it is shown that the image contrast can be increased or decreased depending on the sample–probe distance. To model the interaction of the fiber probe with the ele…

Detection of gas trace of hydrofluoric acid using microcantilever

2004

Abstract Microcantilevers have been used as a gas sensor in order to detect Hydrofluoric acid (HF) in the concentration range of 0.26–13 ppm. Silicon derived elements (Si 3 N 4 , SiO x ) were chosen to serve as chemical sensitive layer. Cantilever deflection and frequency shift were analyzed and compared as a function of the flow rate and the concentration of the HF molecules. The stoichiometry and roughness of the sensitive layer were found to be of major importance. Results show that the most appropriate signal at the lowest concentration ( x surface by HF. The frequency shift that is mainly governed by the loss in cantilever mass can be used at higher concentration.

Observation of Light Confinement Effects with a Near-Field Optical Microscope.

1996

This Letter reports the experimental observation of light confinement effects by near-field optical microscopy. Depolarization effects giving rise to light confinement close to nanoscopic objects have been unambiguously observed in near-field optical images of subwavelength dielectric pads etched on a flat glass substrate. According to the incident polarization, this phenomenon leads to reverse contrasts in the near-field optical image of the same subwavelength objects.

Physics of Near-Field Optical Images

2005

Mechanisms of astringency: Structural alteration of the oral mucosal pellicle by dietary tannins and protective effect of bPRPs

2018

International audience; The interaction of tannins with salivary proteins is involved in astringency. This paper focussed on saliva liningoral mucosae, the mucosal pellicle. Using a cell-based model, the impact of two dietary tannins (EgC and EgCG)on the mucosal pellicle structure and properties was investigated by microscopic techniques. The role of basicProline-Rich-Proteins (bPRPs) in protecting the mucosal pellicle was also evaluated.At low (0.05 mM) tannin concentration, below the sensory detection threshold, the distribution of salivarymucins MUC5B on cells remained unaffected. At 0.5 and 1 mM, MUC5B-tannin aggregates were observed andtheir size increased with tannin concentration and…

MICRO-SCALE STUDY OF RESIDUAL STRESSES IN CR2O3 COATINGS SPRAYED BY APS

2020

International audience; Whichever the application field, every material forming process generates residual stresses on the surface. While they are likely to enhance the aimed properties of the final mechanical part, these stresses may also drastically reduce them and result in early failures. Therefore, understanding the residual stress state remains a major challenge when coating complex parts, especially as most characterization methods at the microscopic scale involve specific sample preparation procedures which may affect the residual stresses field. This work investigates the residual stress state that exists in chromium oxide coatings deposited via Atmospheric Plasma Spray (APS), usin…

Influence of the tip effect of a carbon nanostructure on low current electrical arc initiation

2009

During their setting off, circuit breakers and vacuum switch devices are accompanied by an electric arc whose physical and chemical properties are governed by emissive current sites at the cathode surface called cathode spots. Assuming the continuity of the current on the cathode surfaces, the cathode spots contribute to supply the electrical arc by electron emission and material ejection. Thus they cause erosion on the contact electrodes inducing a dysfunction of contactors. The apparition of these cathode spots is due essentially to dust particles and surface irregularities at different scales. This experimental work represents a contribution to the understanding of the electrical arc beh…

Computation of near field diffraction by a dielectric grating: a comparison with experiments

1995

We use an eigenmode method to compute the near field diffracted by one-dimensional dielectric gratings. We present a set of easily programmable recurrence relations that give the diffracted field from the incident one. The numerical results are compared with the experimental images obtained with the Photon Scanning Tunneling Microscope (PSTM).

High-resolution characterization of the diffusion of light chemical elements in metallic components by scanning microwave microscopy

2014

International audience; An original sub-surface, high spatial resolution tomographic technique based on scanning microwave microscopy (SMM) is used to visualize in-depth materials with different chemical compositions. A significant phase difference in SMM between aluminum and chromium buried patterns has been observed. Moreover this technique was used to characterize a solid solution of a light chemical element (oxygen) in a metal lattice (zirconium). The large solubility of the oxygen in zirconium leads to modifications of the properties of the solid solution that can be measured by the phase shift signal in the SMM technique. The signal obtained in cross-section of an oxidized Zr sample s…

Review of the basic methods for characterizing integrated-optic waveguides

1995

Abstract This article presents a short review of the various methods of characterizing integrated-optic waveguides. It is intended to acquaint researchers, particularly beginners in this field, with the principles of some of the widely used techniques of characterizing one-dimensional (planar) and two-dimensional (such as channel or rib) waueguides.

Recent Experimental Results with the PSTM: - Observation of a Step on a Quartz Surface. - Spatial Spectroscopy of Microwaveguides

1993

The Photon Scanning Tunneling Microscope (PSTM) is based on the frustration of the total internal reflected beam by the end of an optical fiber. Till today it has been used to obtain topographic information generally for smooth samples. In this paper we report two different kinds of experimental results. First, when the sample is in the form of a step, our measurements demonstrate how the images, obtained in the constant intensity mode, depend on the orientation of the incident beam of light with respect to the step. Next, we show that the first derivative of the collected intensity with respect to the probe-sample distance at each point of the sample yields to a new kind of image named her…

Subwavelength mapping of surface photonic states

2003

We show that the spectral tailoring of optical local density of states (LDOS) may be achieved by lithographically designed nanostructures and that the subwavelength mapping of the spectral variation of the optical LDOS is feasible by varying the driving frequency of the effective dipole used in an illumination mode scanning near-field optical microscope.

Imaging the Local Density of States of Optical Corrals

2002

International audience; This paper reports the experimental observation, at optical frequencies, of the electromagnetic local density of states established by nanostructures corresponding to the recently introduced concept of optical corral [G. Colas des Francs et al., Phys. Rev. Lett. 86, 4950 (2001)]. The images obtained by a scanning near-field optical microscope under specific operational conditions are found in agreement with the theoretical maps of the optical local density of states. A clear functionality of detection by the scanning near-field optical microscope is thereby identified since the theoretical maps are computed without including any specific tip model.

Mapping the 3D-surface strain field of patterned tensile stainless steels using atomic force microscopy.

2005

Abstract The quantification of microstructural strains at the surface of materials is of major importance for understanding the reactivity of solids. The present paper aims at demonstrating the potentialities of the atomic force microscopy (AFM) for mapping the three-dimensional surface strain field on patterned tensile specimens. Electron beam (e-beam) lithography has been used to deposit 16×16 arrays of gold-squared pads. Monitoring the evolution of such a pattern under applied strain allows to quantify the triaxial strains both at the micro-(plastic) domain and nanoscale (elastic) domain vs. applied strain. The proposed method was applied to stainless steels after 4.5% plastic strain.

Performance of interdigitated nanoelectrodes for electrochemical DNA biosensor.

2003

An electrochemical methodology for bio-molecule sensing using an array of well-defined nanostructures is presented. We describe the fabrication by e-beam lithography of nanoelectrodes consisting of a 100 micro m x 50 micro m area containing interdigitated electrodes of 100 nm in width and interelectrode distance of 200 nm. Sensitivity and response time of the nanoelectrodes are compared to the responses of macro- and microelectrodes. The specificity of the sensor is studied by modifying the gold electrodes with DNA. The technique enables to characterize both single and double-stranded DNA of 15 nucleotides. A special electrochemical cell is adapted to control the temperature and measure the…

International Scanning Probe Microscopy Conference

2016

International audience

Mucin MUC1: a key protein in oral physiology and the molecular mechanisms of sensory perception of astringency

2022