Search results for "SRAM"
showing 10 items of 14 documents
A Methodology for the Analysis of Memory Response to Radiation through Bitmap Superposition and Slicing
2015
A methodology is proposed for the statistical analysis of memory radiation test data, with the aim of identifying trends in the single-even upset (SEU) distribution. The treated case study is a 65nm SRAM irradiated with neutrons, protons and heavy-ions.
Soft errors in commercial off-the-shelf static random access memories
2016
International audience; This article reviews state-of-the-art techniques for the evaluation of the effect of radiation on static random access memory (SRAM). We detailed irradiation test techniques and results from irradiation experiments with several types of particles. Two commercial SRAMs, in 90 and 65 nm technology nodes, were considered as case studies. Besides the basic static and dynamic test modes, advanced stimuli for the irradiation tests were introduced, as well as statistical post-processing techniques allowing for deeper analysis of the correlations between bit-flip cross-sections and design/architectural characteristics of the memory device. Further insight is provided on the …
Methodologies for the Statistical Analysis of Memory Response to Radiation
2016
International audience; Methodologies are proposed for in-depth statistical analysis of Single Event Upset data. The motivation for using these methodologies is to obtain precise information on the intrinsic defects and weaknesses of the tested devices, and to gain insight on their failure mechanisms, at no additional cost. The case study is a 65 nm SRAM irradiated with neutrons, protons and heavy ions. This publication is an extended version of a previous study.
Investigation on MCU Clustering Methodologies for Cross-Section Estimation of RAMs
2015
International audience; Various failure scenarios may occur during irradiation testing of SRAMs, which may generate different characteristic Multiple Cell Upset (MCU) error patterns. This work proposes a method based on spatial and temporal criteria to identify them.
Influence of beam conditions and energy for SEE testing
2012
GANIL/Applications industrielles; The effects of heavy-ion test conditions and beam energy on device response are investigated. These effects are illustrated with two types of test vehicles: SRAMs and power MOSFETs. In addition, GEANT4 simulations have also been performed to better understand the results. Testing to high fluence levels is required to detect rare events. This increases the probability of nuclear interactions. This is typically the case for power MOSFETs, which are tested at high fluences for single event burnout or gate rupture detection, and for single-event-upset (SEU) measurement in SRAMs below the direct ionization threshold. Differences between various test conditions (…
SEE on Different Layers of Stacked-SRAMs
2015
International audience; This paper presents heavy-ion and proton radiation test results of a 90 nm COTS SRAM with stacked structure. Radiation tests were made using high penetration heavy-ion cocktails at the HIF (Belgium) and at RADEF (Finland) as well as low energy protons at RADEF. The heavy-ion SEU cross-section showed an unusual profile with a peak at the lowest LET (heavy-ion with the highest penetration range). The discrepancy is due to the fact that the SRAM is constituted of two vertically stacked dice. The impact of proton testing on the response of both stacked dice is presented. The results are discussed and the SEU cross-sections of the upper and lower layers are compared. The …
Analysis of the Photoneutron Field Near the THz Dump of the CLEAR Accelerator at CERN With SEU Measurements and Simulations
2022
We study the radiation environment near the terahertz (THz) dump of the CERN Linear Electron Accelerator for Research (CLEAR) electron accelerator at CERN, using FLUktuierende KAskade in German (FLUKA) simulations and single-event upset (SEU) measurements taken with 32-Mbit Integrated Silicon Solution Inc. (ISSI) static random access memories (SRAMs). The main focus is on the characterization of the neutron field to evaluate its suitability for radiation tests of electronics in comparison with other irradiation facilities. Neutrons at CLEAR are produced via photonuclear reactions, mostly initiated by photons from the electromagnetic cascades that occur when the beam is absorbed by the dump …
0.1-10 MeV Neutron Soft Error Rate in Accelerator and Atmospheric Environments
2021
Neutrons with energies between 0.1-10 MeV can significantly impact the Soft Error Rate (SER) in SRAMs manufactured in scaled technologies, with respect to high-energy neutrons. Their contribution is evaluated in accelerator, ground level and avionic (12 km of altitude) environments. Experimental cross sections were measured with monoenergetic neutrons from 144 keV to 17 MeV, and results benchmarked with Monte Carlo simulations. It was found that even 144 keV neutrons can induce upsets due to elastic scattering. Moreover, neutrons in the 0.1-10 MeV energy range can induce more than 60% of the overall upset rate in accelerator applications, while their contribution can exceed 18% in avionics.…
Real-Time SRAM Based Particle Detector
2015
International audience; Monitoring radiative environments is of great importance, especially for facilities hosting large particle accelerators and nuclear power plants. Such facilities make use of monitoring systems that are usually composed of different sensors to evaluate the intensity of the ambient radiation field in different locations. In this paper, we propose an SRAM-based monitor that works in dynamic mode (memory continuously accessed), according to data gathered by irradiating our sensor in several particle accelerator facilities. The dynamic mode of operation allows for real-time sensing, especially when the particle fluence is high. In order to ensure the efficiency of the det…
Dynamic Test Methods for COTS SRAMs
2014
International audience; In previous works, we have demonstrated the importance of dynamic mode testing of SRAM components under ionizing radiation. Several types of failures are difficult to expose when the device is tested under static (retention) mode. With the purpose of exploring and defining the most complete testing procedures and reveal the potential hazardous behaviors of SRAM devices, we present novel methods for the dynamic mode radiation testing of SRAMs. The proposed methods are based on different word address accessing schemes and data background: Fast Row, Fast Column, Pseudorandom, Adjacent (Gray) and Inverse Adjacent (Gray). These methods are evaluated by heavy ion and atmos…