Integrated Activities for the High Energy Astrophysics Domain

High-energy astrophysics is the study of the most energetic and extreme processes in the universe, processes that are impossible to replicate in experiments here on Earth. These processes are associated with objects like exploding stars and supermassive black holes, and their understanding not only helps us answer fundamental questions about the origin and evolution of our cosmos but also fosters technological developments in other areas. Further, it prepares us to optimise space exploration expeditions for maximum impact. Teamwork is necessary for success and the EU-funded AHEAD2020 project is team building to achieve this. A key focus is integration of national efforts while enhancing foc…

TES microcalorimeter for IXO: From focal plane to anticoincidence detector

2009

The high resolution spectroscopy provides a unique technique to extract fundamental information in X-ray Astrophysics and Cosmology. In order to exploit at the best the capability of carrying out spectroscopy of faint sources, great care must be taken to reduce the background in the main detector. In this paper, we will present the working principle of a TES (Transition Edge Sensor) Microcalorimeter, its application for fine spectroscopy and a novel anticoincidence technique , based itself on a TES detector. Recent results from the first sample of the IXO-anticoincidence detector will be also shown.

Direct sunlight facility for testing and research in HCPV

2014

A facility for testing different components for HCPV application has been developed in the framework of "Fotovoltaico ad Alta Efficienza" (FAE) project funded by the Sicilian Regional Authority (PO FESR Sicilia 2007/2013 4.1.1.1). The testing facility is equipped with an heliostat providing a wide solar beam inside the lab, an optical bench for mounting and aligning the HCPV components, electronic equipments to characterize the I-V curves of multijunction cells operated up to 2000 suns, a system to circulate a fluid in the heat sink at controlled temperature and flow-rate, a data logging system with sensors to measure temperatures in several locations and fluid pressures at the inlet and ou…

Thermal modelling of the ATHENA X-IFU filters

2018

Copyright 2018 Society of Photo-Optical Instrumentation Engineers (SPIE). One print or electronic copy may be made for personal use only. Systematic reproduction and distribution, duplication of any material in this paper for a fee or for commercial purposes, or modification of the content of the paper are prohibited. The X-IFU instrument of the ATHENA mission requires a set of thermal filters to reduce the photon shot noise onto its cryogenic detector and to protect it from molecular contamination. A set of five filters, operating at different nominal temperatures corresponding to the cryostat shield temperatures, is currently baselined. The knowledge of the actual filter temperature profi…

Photoluminescence activity in natural silica excited in the vacuum-UV range

1999

Abstract We report an experimental study on the optical absorption and photoluminescence detected in samples of natural silica. Our results show that the two emission bands, β (∼3.1 eV) and α E (∼4.3 eV), have an excitation profile in the vacuum ultraviolet region with a maximum at ∼7.5 eV. This excitation profile indicates that, in terms of energy levels of the luminescent defect, there is a transition from a ground state, S 0 , to a second excited state, S 2 , able to excite PL emission, in addition to the well known transition corresponding to the optical absorption band, B 2β . Our data are in a quantitative agreement with `ab initio' calculations carried out for a two-fold coordinated …

Thermal Filters for the ATHENA X-IFU: Ongoing Activities Toward the Conceptual Design

2016

ATHENA is the L2 mission selected by ESA to pursue the science theme “Hot and Energetic Universe.” One of the two focal plane instruments is the X-ray Integral Field Unit, an array of TES microcalorimeters operated at T $$<$$ 100 mK. To allow the X-ray photons focused by the telescope to reach the detector, windows have to be opened on the cryostat thermal shields. X-ray transparent filters need to be mounted on these open windows to attenuate the IR radiation from warm surfaces, to attenuate RF electromagnetic interferences on TES sensors and SQUID electronics, and to protect the detector from contamination. This paper reviews the ongoing activities driving the design of the X-IFU thermal …

Synchrotron x-ray transmission measurements and modeling of filters investigated for Athena

2020

International audience; Advanced Telescope for High-Energy Astrophysics is a large-class astrophysics space mission selected by the European Space Agency to study the theme "Hot and Energetic Universe." The mission essentially consists of a large effective area x-ray telescope and two detectors: the X-ray Integral Field Unit (X-IFU) and the Wide Field Imager (WFI). Both instruments require filters to shield from out-of-band radiation while providing high transparency to x-rays. The mission is presently in phase B; thus, to consolidate the preliminary design, investigated filter materials need to be properly characterized by experimental test campaigns. We report results from high-resolution…

The X-Ray Telescope (XRT) for the Hinode Mission

2007

著者人数：29名

Astrophysics and spectroscopy with microcalorimeters on an electron beam ion trap

2003

The importance of the combination of electron beam ion trap (EBIT) spectroscopy with X-ray microcalorimeters in the field of astrophysics was discussed. X-ray astronomy involves heavily charged ion instruments , especially EBIT, to obtain improved quality atomic data. In this regard, the research program at the National Institute of Standards and Technology, which uses X-ray spectroscopic methods to study plasma and atomic physics, was also discussed.

Tests of Lobster Eye Optics for Small Space X-ray Telescope

2011

Abstract The Lobster eye design for a grazing incidence X-ray optics provides wide field of view of the order of many degrees, for this reason it can be a convenient approach for the construction of space all-sky X-ray monitors. We present preliminary results of tests of prototype lobster eye X-ray optics in quasi parallel beam full imaging mode conducted using the 35 m long X-ray beam-line of INAF-OAPA in Palermo (Italy). X-ray images at the focal plane have been taken with a microchannel plate (MCP) detector at several energy values from 0.3 to 8 keV. The gain, the field of view and the angular resolution have been measured and compared with theoretical values.

Fabrication of Electrical Contacts on Pyramid-Shaped NTD-Ge Microcalorimeters Using Free-Standing Shadow Masks

2011

In our effort to fabricate arrays of germanium microcalorimeters for X-ray detection, a truncated square-based pyramid shape has been identified as a suitable geometry for the sensors. It allows to obtain a uniform current spreading across each sensor, and represents a good compromise between having a large support area for the radiation absorber and for maintaining an overall small bolometer volume. This three-dimensional geometry, however, does not allow to create the electrical contacts for the sensors using a regular photoresist-based lift-off metallization process. In this paper we show how to deposit metal contacts on the lateral faces of the pyramidal sensors by metal evaporation thr…

Status of the EPIC thin and medium filters on-board XMM-Newton after more than 10 years of operation II: analysis of in-flight data

2013

After more than ten years of operation of the EPIC camera on board the X-ray observatory XMM-Newton we have reviewed the status of its thin and medium filters by performing both analysis of data collected in-flight and laboratory measurements on on-ground back-up filters. We have investigated the status of the EPIC thin and medium filters by performing an analysis of the optical loading in the PN offset maps to gauge variations in the optical and UV transmission of the filters. We both investigated repeated observations of single optically bright targets and performed a statistical analysis of the extent of loading versus visual magnitude at different epochs. We report the results of these …

The Wide Field Imager instrument for Athena

2017

ESA's next large X-ray mission ATHENA is designed to address the Cosmic Vision science theme 'The Hot and Energetic Universe'. It will provide answers to the two key astrophysical questions how does ordinary matter assemble into the large-scale structures we see today and how do black holes grow and shape the Universe. The ATHENA spacecraft will be equipped with two focal plane cameras, a Wide Field Imager (WFI) and an X-ray Integral Field Unit (X-IFU). The WFI instrument is optimized for state-of-The-Art resolution spectroscopy over a large field of view of 40 amin x 40 amin and high count rates up to and beyond 1 Crab source intensity. The cryogenic X-IFU camera is designed for high-spect…

Fabrication of Bismuth Absorber Arrays for NTD-Ge Hard X-ray Microcalorimeters

2020

The high-spectral-resolution detection of hard X-rays (E &gt; 20 keV) is a challenging and nearly unexplored area in space astrophysics. Traditionally hard X-ray detectors present moderate spectral resolutions, although few tens of eV one could open new frontiers in the study of nuclear processes and high-temperature plasma dynamics in energetic processes. This can be achieved by using cryogenic microcalorimeters. Within a research activity aimed at developing arrays of neutron transmutation-doped germanium (NTD-Ge) microcalorimeters for the high-spectral-resolution detection (about 50 eV@60 keV) of hard X-rays (20 keV &lt; E&lt;100 keV), we developed an electroplating process to fabricate …

Lobster eye optics for nano-satellite x-ray monitor

2011

The Lobster eye design for a grazing incidence X-ray optics provides wide field of view of the order of many degrees, for this reason it would be a convenient approach for the construction of space X-ray monitors. In this paper, we compare previously reported measurements of prototype lobster eye X-ray optics called P-25 with computer simulations and discuss differences between the theoretical end experimentally obtained results. Usability of this prototype lobster eye and manufacturing technology for the nano-satellite mission is assessed. The specific scientific goals are proposed.

Spectral broadening by incomplete thermalization of the energy in X-ray microcalorimeters with superconducting absorber and NTD-Ge thermal sensor

2004

Abstract We present a model of the response of a cryogenic microcalorimeter with superconducting absorber and phonon sensitive thermal sensor to the absorption of X-ray photons. The model is based on the main microscopic processes responsible for the thermalization of the deposited energy. We use a system of rate equations to describe the energy downconversion in the superconductor and transport to the thermal sensor. The model is a tool to investigate the thermalization efficiency with respect to the device characteristics (i.e. absorber material, geometry), in order to optimize the performances of these detectors. As a first case study, we report results of simulations for a microcalorime…

Xrase: The X-Ray Spectroscopic Explorer

2001

The X-Ray Spectroscopic Explorer (XRASE) has a unique combination of features that will make it possible to address many of NASA’s scientific goals. These include how galaxy clusters form, the physics and chemistry of the ISM, the heating of stellar coronae, the amount and content of intergalactic baryonic matter, the mass of black holes and the formation of disks and jets in AGN and galactic binaries. XRASE has a thin foil, multilayered telescope with a large collecting area up to 10 keV, especially in the Fe Kα region (1100 cm2). Its microcalorimeter array combines high energy resolution (7 eV at 6 keV) and efficiency with a field-of-view of 26 arcmin2. A deep orbit allows for long, conti…

ATHENA WFI optical blocking filters development status toward the end of the instrument phase-A

2018

Copyright 2018 Society of Photo-Optical Instrumentation Engineers (SPIE). One print or electronic copy may be made for personal use only. Systematic reproduction and distribution, duplication of any material in this paper for a fee or for commercial purposes, or modification of the content of the paper are prohibited. The Wide Field Imager (WFI) is one of the two instruments of the ATHENA astrophysics space mission approved by ESA as the second large mission in the Cosmic Vision 2015-2025 Science Programme. The WFI, based on a large array of depleted field effect transistors (DEPFET), will provide imaging in the 0.2-15 keV band over a 40'x40' field of view, simultaneously with spectrally an…

The mirror module design for the cryogenic x-ray imaging spectrometer on-board ORIGIN

2011

ORIGIN is a medium size high-energy mission concept submitted to ESA in response to the Cosmic Vision call issued on July 2010. The mission will investigate the evolution of the Universe by performing soft X-ray high resolution spectroscopic measurements of metals formed in different astrophysical environments, from the first population III stars at z > 7 to the present large scale structures. The main instrument on-board ORIGIN will be a large format array of TES X-ray micro-calorimeters covering a FOV of 30' at the focal plane of a grazing incidence optical module with a focal length of 2.5 m and an angular resolution of 30'' HEW at 1 keV. We present the optical module design which is bas…

Filters design and characterization for LAD instrument onboard eXTP

2022

Copyright 2022 Society of Photo‑Optical Instrumentation Engineers (SPIE). One print or electronic copy may be made for personal use only. Systematic reproduction and distribution, duplication of any material in this publication for a fee or for commercial purposes, and modification of the contents of the publication are prohibited. The LAD (Large Area Detector) instrument, onboard the Sino-European mission eXTP (enhanced X-ray Timing and Polarimetry), will perform single-photon, high-resolution timing and energy measurements, in the energy range 2–30 keV, with a large collecting area. Its silicon drift detectors need shielding from NIR/Vis/UV light by astrophysical sources and the bright Ea…

The Athena X-ray Integral Field Unit (X-IFU)

2016

Event: SPIE Astronomical Telescopes + Instrumentation, 2016, Edinburgh, United Kingdom.

Study of Microcalorimeters for Astrophysics Applications

2008

In the framework of the Italian Space Agency R&D project, which is focused on the development of microcalorimeters for applications on astrophysics, we are studying different methods for TES microcalorimeter production and developing simulations of various absorber performances. In this paper are presented preliminary results obtained with two different geometries: front back and planar on SiN membrane.

Spiral conical approximations to double reflection Wolter optics

2008

The design of a grazing incidence focusing optic obtained from a spiral approximation to multiple nested cones produces an annular image of a point source. The angular size of the annulus depends mainly on the pitch of the winding and the focal length. For a spiral conical approximation to Wolter optics, the effect is magnified by the double reflection. However, if the two conical spirals are wound one clock-wise and the other counter-clock-wise, then the aberration is partially compensated. We use a ray tracing code to evaluate advantages and disadvantages of this optical design for potential applications of a light weight optics technology based on plastic foils that we are currently inve…

Active shape correction of a thin glass/plastic x-ray mirror

2015

Optics for future X-ray telescopes will be characterized by very large aperture and focal length, and will be made of lightweight materials like glass or plastic in order to keep the total mass within acceptable limits. Optics based on thin slumped glass foils are currently in use in the NuSTAR telescope and are being developed at various institutes like INAF/OAB, aiming at improving the angular resolution to a few arcsec HEW. Another possibility would be the use of thin plastic foils, being developed at SAO and the Palermo University. Even if relevant progresses in the achieved angular resolution were recently made, a viable possibility to further improve the mirror figure would be the app…

X-ray emitting hot plasma in solar active regions observed by the SphinX spectrometer

2012

Aims. The detection of very hot plasma in the quiescent corona is important for diagnosing heating mechanisms. The presence and the amount of such hot plasma is currently debated. The SphinX instrument on-board the CORONAS-PHOTON mission is sensitive to X-ray emission of energies well above 1 keV and provides the opportunity to detect the hot plasma component. Methods. We analysed the X-ray spectra of the solar corona collected by the SphinX spectrometer in May 2009 (when two active regions were present). We modelled the spectrum extracted from the whole Sun over a time window of 17 days in the 1.34− 7k eV energy band by adopting the latest release of the APED database. Results. The SphinX …

The filter and calibration wheel for the ATHENA wide field imager

2016

The planned filter and calibration wheel for the Wide Field Imager (WFI) instrument on Athena is presented. With four selectable positions it provides the necessary functions, in particular an UV/VIS blocking filter for the WFI detectors and a calibration source. Challenges for the filter wheel design are the large volume and mass of the subsystem, the implementation of a robust mechanism and the protection of the ultra-thin filter with an area of 160 mm square. This paper describes performed trade-offs based on simulation results and describes the baseline design in detail. Reliable solutions are envisaged for the conceptual design of the filter and calibration wheel. Four different varian…

Deformation analysis of ATHENA test filters made of plastic thin films supported by a mesh under differential static pressure

2019

Within ESA Cosmic Vision 2015-2025 Science Program, ATHENA was selected to be a Large-class high energy astrophysics space mission. The observatory will be equipped with two interchangeable focal plane detectors named X-Ray Integral Field Unit (X-IFU) and Wide Field Imager (WFI). In order to optimally exploit the detector sensitivity, X-ray transparent filters are required. Such filters need to be extremely thin to maximize the X-ray transparency, that is, no more than a few tens of nm, still they must be able to sustain the severe stresses experienced during launch. Partially representative test filters were made with a thin polypropylene film, coated with Ti, and supported by a thin highl…

The Palermo XACT facility: a new 35 m long soft x-ray beam-line for the development and calibration of next-generation x-ray observatories

2006

The X-ray Astronomy Calibration and Testing (XACT) facility of the Instituto Nazionale di Astrofisica (INAF) at Osservatorio Astronomico di Palermo has recently undergone a major upgrade with the design and construction of a 35 meter long vacuum beam-line operating in the soft X-rays (0.1-20 keV) and the addition of new hardware to meet the requirements for testing and calibration of next generation X-ray missions. We report on the present configuration of the facility and briefly survey the range of its applications.

The performance of the ATHENA X-ray Integral Field Unit

2018

The X-ray Integral Field Unit (X-IFU) is a next generation microcalorimeter planned for launch onboard the Athena observatory. Operating a matrix of 3840 superconducting Transition Edge Sensors at 90 mK, it will provide unprecedented spectro-imaging capabilities (2.5 eV resolution, for a field of view of 5') in the soft X-ray band (0.2 up to 12 keV), enabling breakthrough science. The definition of the instrument evolved along the phase A study and we present here an overview of its predicted performances and their modeling, illustrating how the design of the X-IFU meets its top-level scientific requirements. This article notably covers the energy resolution, count-rate capability, quantum …

Electrical-optical characterization of multijunction solar cells under 2000X concentration

2014

In the framework of the FAE "Fotovoltaico ad Alta Efficienza" ("High Efficiency Photovoltaic") Research Project (PO FESR Sicilia 2007/2013 4.1.1.1), we have performed electrical and optical characterizations of commercial InGaP/InGaAs/Ge triple-junction solar cells (1 cm2) mounted on a prototype HCPV module, installed in Palermo (Italy). This system uses a reflective optics based on rectangular off-axis parabolic mirror with aperture 45×45 cm2 leading to a geometrical concentration ratio of 2025. In this study, we report the I-V curve measured under incident power of about 700 W/m2 resulting in an electrical power at maximum point (PMP) of 41.4 W. We also investigated the optical properties…

The Large Area Detector onboard the eXTP mission

2022

The Large Area Detector (LAD) is the high-throughput, spectral-timing instrument onboard the eXTP mission, a flagship mission of the Chinese Academy of Sciences and the China National Space Administration, with a large European participation coordinated by Italy and Spain. The eXTP mission is currently performing its phase B study, with a target launch at the end-2027. The eXTP scientific payload includes four instruments (SFA, PFA, LAD and WFM) offering unprecedented simultaneous wide-band X-ray timing and polarimetry sensitivity. The LAD instrument is based on the design originally proposed for the LOFT mission. It envisages a deployed 3.2 m2 effective area in the 2-30 keV energy range, a…

Planar Array Technology for the Fabrication of Germanium X-Ray Microcalorimeters

2008

Several technologies are presently competing for measuring the temperature increase in cryogenic micro-calorimeters used as high resolution energy-dispersive X-ray detectors. Doped germanium, whose resistivity depends on temperature, is a promising material for this purpose, because of its comparatively low specific heat and the possibility of making wafers with high doping uniformity by neutron transmutation. Presently, Ge-based microcalorimeters are still micro-machined and manually assembled. Here we present a planar approach to the fabrication of 2-D arrays of microcalorimeters and show the preliminary technological results.

Test of x-ray microcalorimeters with bilayer absorbers

2008

Superconducting absorbers for thermal X-ray microcalorimeters should convert into thermalized phonons and transfer to the thermal sensor most of the energy deposited by single photons, on a time scale as short as a few tens of microseconds. Since deposition of X-ray energy in a superconductor produces quasiparticles by breaking up of Cooper pairs, the thermalization efficiency depends on the time scale on which they survive within the absorber volume, trapping part of the absorbed energy. According to the predicted values of their microscopic parameters, in many standard type-I superconducting metals the quasiparticle life time at very low temperatures results too long to allow for recombin…

SOFT X-RAY IRRADIATION OF PURE CARBON MONOXIDE INTERSTELLAR ICE ANALOGUES

2012

There is an increasing evidence for the existence of large organic molecules in the interstellar and circumstellar medium. Very few among such species are readily formed in conventional gas-phase chemistry under typical conditions of interstellar clouds. Attention has therefore focused on interstellar ices as a potential source of these relatively complex species. Laboratory experiments show that irradiation of interstellar ice analogues by fast particles or ultraviolet radiation can induce significant chemical complexity. However, stars are sources of intense X-rays at almost every stage of their formation and evolution. Such radiation may thus provide chemical changes in regions where ult…

Thin-shell plastic lenses for space and laboratory applications

2004

We have identified an inexpensive, readily available, mechanically stable, extremely smooth, elastic, and mechanically uniform plastic suitable for thin film X-ray optics. Polyethylene terephthalate (PET) is easily deformed without losing its elastic properties or surface smoothness. Most important, PET can be coated with mono- or multilayers that reflect X-rays at grazing incidence. We have used these properties to produce X-ray optics made either as a concentric nest of cylinders or as a spiral. We have produced accurately formed shells in precisely machined vacuum mandresl or used a pin and wheel structure to form a continuously wound spiral. The wide range of medical, industrial and sci…

Laboratory astrophysics survey of key x-ray diagnostic lines using a microcalorimeter on an electron beam ion trap

2000

Cosmic plasma conditions created in an electron beam ion trap (EBIT) make it possible to simulate the dependencies of key diagnostic X-ray lines on density, temperature, and excitation conditions that exist in astrophysical sources. We used a microcalorimeter for such laboratory astrophysics studies because it has a resolving power ≈1000, quantum efficiency approaching 100%, and a bandwidth that spans the X-ray energies from 0.2 keV to 10 keV. Our microcalorimeter, coupled with an X-ray optic to increase the effective solid angle, provides a significant new capability for laboratory astrophysics measurements. Broadband spectra obtained from the National Institute of Standards and Technology…

Preliminary Mechanical Characterization of Thermal Filters for the X-IFU Instrument on Athena

2018

The X-ray Integral Field Unit (X-IFU) is one of the two instruments of the Athena astrophysics space mission approved by ESA in the Cosmic Vision Science Program. The X-IFU consists of a large array of TES microcalorimeters that will operate at ~ 50 mK inside a sophisticated cryostat. A set of thin filters, highly transparent to X-rays, will be mounted on the cryostat thermal shields in order to attenuate the IR radiative load, to attenuate RF electromagnetic interferences, and to protect the detector from contamination. In this paper, we present the current thermal filters design, describe the filter samples developed/procured so far, and present preliminary results from the ongoing charac…

GrailQuest and HERMES: hunting for gravitational wave electromagnetic counterparts and probing space-time quantum foam

2021

GrailQuest (Gamma-ray Astronomy International Laboratory for Quantum Exploration of Space-Time) is an ambitious astrophysical mission concept that uses a fleet of small satellites whose main objective is to search for a dispersion law for light propagation in vacuo. Within Quantum Gravity theories, different models for space-time quantization predict relative discrepancies of the speed of photons w.r.t. the speed of light that depend on the ratio of the photon energy to the Planck energy. This ratio is as small as 10-23 for photons in the γ- ray band (100 keV). Therefore, to detect this effect, light must propagate over enormous distances and the experiment must have extraordinary sensitivi…

Carbon coatings for soft-x-ray reflectivity enhancement

2007

In X-ray astronomical telescopes, the focalization of the radiation is achieved by means of grazing incidence Wolter I (parabola + hyperbola) optics in total reflection regime. In general, high density materials (e.g. Au, Pt, Ir, W) are used as reflecting coatings, in order to increase as much as possible the cut-off angles and energies for total reflection. However these materials present an important reduction of the reflectivity between 0.2 and 5 keV, due to the photoabsorption, and this phenomenon is particularly enhanced in correspondence of the M absorption edges (between 2 and 3.5 keV). In general, this determines a strong decrease of the telescope effective area. To overcome the pro…

Spectral broadening by spatial effects in X-ray microcalorimeters with superconducting absorber and NTD-Ge thermal sensor

2004

We discuss how the sensitivity to the position of absorption of the photons can affect the spectral resolution of X-ray microcalorimeters with superconducting Sn absorber and NTD-Ge thermal sensor. Data obtained through the computer simulations are reported for microcalorimeters with different geometries and phonon transmission probabilities at the interface between the absorber and thermistor.

Designing an x-ray baffle for stray-light reduction at the focal plane of the Wide Field Imager on board EDGE

2008

We exploited a ray-tracing Montecarlo code to investigate the effects of stray-light on the performances of the Wide Field Imager (FoV = 1.5 deg) on board the EDGE satellite. We found non negligible stray-light contamination up to ~ 8 deg off-axis angles. We discuss the benefits of a baffle in order to reduce this contamination, that would strongly affect the telescope sensitivity, and present two possible baffle designs based on results of simulations.

The HERMES-Technologic and Scientific Pathfinder

2020

HERMES-TP/SP (High Energy Rapid Modular Ensemble of Satellites Technologic and Scientific Pathfinder) is a constellation of six 3U nano-satellites hosting simple but innovative X-ray detectors, characterized by a large energy band and excellent temporal resolution, and thus optimized for the monitoring of Cosmic High Energy transients such as Gamma Ray Bursts and the electromagnetic counterparts of Gravitational Wave Events, and for the determination of their positions. The projects are funded by the Italian Ministry of University and Research and by the Italian Space Agency, and by the European Union Horizon 2020 Research and Innovation Program under Grant Agreement No. 821896. HERMES-TP/S…

Carbon nanotubes thin filters for x-ray detectors in space

2022

In this paper, we present the first results from an investigation performed on nanometric thin pellicles based on carbon nanotubes (CNT) of potential interest for manufacturing large area optical blocking filters to protect soft X-ray detectors in astrophysics space missions. In order to evaluate the effective capability of such materials to block UV/VIS/IR radiation, while being highly transparent in the soft X-rays and strong enough to withstand the severe launch stresses, we have performed a suite of characterization measurements. These include: UV/VIS/IR and X-ray absorption spectroscopy, X-ray Photoelectron Spectroscopy and Scanning Electron Microscopy on bare and Al coated small self-…

CALOS: an experiment to study the solar corona with an array of NTD Ge microcalorimeters

2002

In response to the Italian Space Agency announcement "New Ideas for Space Missions", we have proposed an observatory "CALorimetri per Osservazioni Solari" (CALOS) that will perform spatially resolved (Deltatheta similar to 2) X-ray spectroscopy of the solar corona over the 0.1 - 10 keV band using an array of NTD germanium microcalorimeters. The observatory will also include an X-ray polarimeter of radically new design that will study the hard X-ray solar emission and its polarization and will serve as a flare alarm.

Effective collecting area of lobster eye optics and optimal value of effective angle

2019

Effective collecting area represents one of principal parameters of optical systems. The common requirement is to obtain as large effective collecting area as it is possible. The paper presents an analytical method of calculating effective collecting length and its maximization for lobster eye optics. The results are applicable for a Schmidt as well as for an Angel lobster eye geometry used in an astronomical telescope where the source is at infinity such that the incoming rays are parallel. The dependence of effective collecting area vs. geometrical parameters is presented in a form of a simple compact equation. We show that the optimal ratio between mirrors depth and distance (effective a…

In-flight calibration of the ROSAT HRI ultraviolet sensitivity

2000

Comparing measured and estimated count rates of a few selected sample stars, we confirm the validity and provide the in-flight calibration of the ROSAT HRI UV/visible effective area model in Zombeck et al. The count rate estimates for Betelgeuse derived with this model are in agreement with the measured HRI upper limit. This result is also confirmed in an erratum by Berghöfer et al. aimed at revising their previous calculation, which was overestimated by more than 2 orders of magnitude. Adopting this ROSAT HRI UV/visible effective area model and measured UV/visible spectra of a set of sample stars covering the range of Teff 3000-40,000 K, we have built the calibration curves to estimate UV/…

Role of clays in protecting adsorbed DNA against X-ray radiation

2004

The X-ray emission of the young Sun was much harder and intense than today and might have played a significant role in the evolution of complex organics in protoplanetary environments. We investigate the effects of soft X-rays on tryptophan molecules in aqueous solutions at room temperature. As results of the irradiation experiments we detect several light species indicative of fragmentation, together with large molecular structures such as tryptophan dipeptide and tripeptide. Complexification is more evident in H2O solution than in D2O, probably due to isotopic effects. The abundances of peptides depend on the irradiation dose and decrease with increasing energy deposition. Radicals such a…

Evaluation of chronic alcohol self-administration by a 3-bottle choice paradigm in adult male rats. Effects on behavioural reactivity, spatial learni…

2011

Chronic ethanol consumption is able to modify emotional behaviour and cognition in humans. In particular, the effects exerted by alcohol may depend on doses, time and modalities of administration. In this study we investigated, in adult male rats, ethanol self-administration and preference patterns using a 3-bottle choice paradigm with water, 10% ethanol solution, and white wine (10%, v/v), along a four-week period. The influence of alcohol free-access on novelty-induced explorative behaviour in the open field, and on spatial learning and reference memory in the Morris water maze was also evaluated. Our results indicate that: (i) rats show a higher preference for alcohol, in the first two w…

Baseline design of the filters for the LAD detector on board LOFT

2014

The Large Observatory for X-ray Timing (LOFT) was one of the M3 missions selected for the phase A study in the ESA's Cosmic Vision program. LOFT is designed to perform high-time-resolution X-ray observations of black holes and neutron stars. The main instrument on the LOFT payload is the Large Area Detector (LAD), a collimated experiment with a nominal effective area of ~10 m 2 @ 8 keV, and a spectral resolution of ~240 eV in the energy band 2-30 keV. These performances are achieved covering a large collecting area with more than 2000 large-area Silicon Drift Detectors (SDDs) each one coupled to a collimator based on lead-glass micro-channel plates. In order to reduce the thermal load onto …

Structural modelling and mechanical tests supporting the design of the ATHENA X-IFU thermal filters and WFI optical blocking filter

2018

Copyright 2018 Society of Photo-Optical Instrumentation Engineers (SPIE). One print or electronic copy may be made for personal use only. Systematic reproduction and distribution, duplication of any material in this paper for a fee or for commercial purposes, or modification of the content of the paper are prohibited. ATHENA is a Large high energy astrophysics space mission selected by ESA in the Cosmic Vision 2015-2025 Science Program. It will be equipped with two interchangeable focal plane detectors: the X-Ray Integral Field Unit (X-IFU) and the Wide Field Imager (WFI). Both detectors require x-ray transparent filters to fully exploit their sensitivity. In order to maximize the X-ray tra…

Thin plastic shell x-ray optics: an update

2003

We present new results from a program to develop large area X-ray telescopes that are made from thin plastic shells. We use multi-shell cylindrical lenses in a point-to-point configuration to form full aperture images of the small focal spot in a an X-ray tube on a microchannel plate detector. The image data are analyzed to yield radial profiles and encircled energy curves. The derived parameters can be extrapolated to the case of a telescope that is a conical approximation to Wolter 1 optics. The plastic shells can be coated with suitable mono- or multilayers that allow for a wideband coverage of X-ray energies. Our current program is focused on the development of a large area, hard X-ray …

The Large Area Detector of LOFT: the Large Observatory for X-ray Timing

2014

LOFT (Large Observatory for X-ray Timing) is one of the five candidates that were considered by ESA as an M3 mission (with launch in 2022-2024) and has been studied during an extensive assessment phase. It is specifically designed to perform fast X-ray timing and probe the status of the matter near black holes and neutron stars. Its pointed instrument is the Large Area Detector (LAD), a 10 m 2 -class instrument operating in the 2-30keV range, which holds the capability to revolutionise studies of variability from X-ray sources on the millisecond time scales. The LAD instrument has now completed the assessment phase but was not down-selected for launch. However, during the assessment, most o…

The thin and medium filters of the EPIC camera on-board XMM-Newton: measured performance after more than 15 years of operation

2016

After more than 15 years of operation of the EPIC camera on board the XMM-Newton X-ray observatory, we have reviewed the status of its Thin and Medium filters. We have selected a set of Thin and Medium back-up filters among those still available in the EPIC consortium and have started a program to investigate their status by different laboratory measurements including: UV/VIS transmission, Raman scattering, X-Ray Photoelectron Spectroscopy, and Atomic Force Microscopy. Furthermore, we have investigated the status of the EPIC flight filters by performing an analysis of the optical loading in the PN offset maps to gauge variations in the optical and UV transmission. We both investigated repea…

The Cryogenic AntiCoincidence Detector Project for ATHENA+: An Overview Up to the Present Status

2014

ATHENA+ is a space mission proposal for the next ESA L2-L3 slot. One of the focal plane instruments is the X-ray integral field unit (X-IFU) working in the energy range 0.3–10 keV. It is a multi-array based on TES detectors aimed at characterizing faint or diffuse sources (e.g. WHIM or galaxy outskirt). The X-IFU will be able to achieve the required sensitivity if a low background is guaranteed. The studies performed by GEANT4 simulations depict a scenario where the use of an active anticoincidence (AC) is mandatory to reduce the background expected in L2 orbit down to the goal level of 0.005 cts cm $$^{-2}$$  s $$^{-1}$$  keV $$^{-1}$$ . This is possible using a cryogenic anticoincidence (…

Realization and drive tests of active thin glass x-ray mirrors

2016

A technique to obtain lightweight and high-resolution focusing mirror segments for large aperture X-ray telescopes is the hot slumping of thin glass foils. In this approach, already successfully experimented to manufacture the optics of the NuSTAR X-ray telescope, thin glasses are formed at high temperature onto a precisely figured mould. The formed glass foils are subsequently stacked onto a stiff backplane with a common axis and focus to form an XOU (X-ray Optical Unit), to be later integrated in the telescope optic structure. In this process, the low thickness of the glass foils guarantees a low specific mass and a very low obstruction of the effective area. However, thin glasses are sub…

Timing techniques applied to distributed modular high-energy astronomy: the H.E.R.M.E.S. project

2021

The HERMES-TP/SP (High Energy Rapid Modular Ensemble of Satellites -- Technologic and Scientific Pathfinder) is an in-orbit demonstration of the so-called distributed astronomy concept. Conceived as a mini-constellation of six 3U nano-satellites hosting a new miniaturized detector, HERMES-TP/SP aims at the detection and accurate localisation of bright high-energy transients such as Gamma-Ray Bursts. The large energy band, the excellent temporal resolution and the wide field of view that characterize the detectors of the constellation represent the key features for the next generation high-energy all-sky monitor with good localisation capabilities that will play a pivotal role in the future …

A single stage adiabatic demagnetization refrigerator for testing x-ray microcalorimeters

2004

A single stage Adiabatic Demagnetization Refrigerator (ADR), has been set-up at the X-ray Astronomy Calibration and Testing (XACT) facility of INAF - Osservatorio Astronomico di Palermo G.S. Vaiana, for the development and testing of cryogenic X-ray detectors for laboratory and astrophysical applications. The ADR allows to cool detectors at temperatures below 40 mK and to maintain them at constant operating temperature for many hours. We describe the design and construction of the ADR and present test results and performances.

Optical thermal filters for eXTP: manufacturing and characterization

2020

In order to ensure the effective detection of X-ray astronomical detectors by blocking ultraviolet, visible and infrared light, adding optical thermal filter in front of the load is an effective method. According to the scientific requirements of eXTP, optical thermal filters with aluminized polyimide (PI) film structure had been designed and tested in this paper, the results of mechanical tests including burst pressure, vibration and acoustic tests, also the transparent properties of optics in UV, Vis and IR lights are presented. The mechanical test results show that the filters for LAD and SFA can't pass the acoustic tests, causing the thickness of PI should be increased or a nickel mesh …

XMM-Newton First-Light Observations of the Hickson Galaxy Group 16

2000

This paper presents the XMM-Newton first-light observations of the Hickson-16 compact group of galaxies. Groups are possibly the oldest large-scale structures in the Universe, pre-dating clusters of galaxies, and are highly evolved. This group of small galaxies, at a redshift of 0.0132 (or 80 Mpc) is exceptional in the having the highest concentration of starburst or AGN activity in the nearby Universe. So it is a veritable laboratory for the study of the relationship between galaxy interactions and nuclear activity. Previous optical emission line studies indicated a strong ionising continuum in the galaxies, but its origin, whether from starbursts, or AGN, was unclear. Combined imaging and…

The Space Weather X-Ray spectrometer for the Helianthus sub-L1 mission with solar photonic propulsion

2022

Copyright 2022 Society of Photo‑Optical Instrumentation Engineers (SPIE). One print or electronic copy may be made for personal use only. Systematic reproduction and distribution, duplication of any material in this publication for a fee or for commercial purposes, and modification of the contents of the publication are prohibited. Helianthus is a phase A study of a space weather station with solar photonic propulsion. The scientific payload will be made of: an X-ray spectrometer to detect solar flares; SailCor, a coronagraph with a wide field of view; a plasma analyzer; a magnetometer. The maximum allowed mass for the entire scientific payload shall not exceed 5 kg. The two imaging devices…

The optical/UV filters for the EPIC experiment

1998

EPIC, the European Photon Imaging Cameras is an experiment based on cooled CCDs on board the ESA X-ray Multi Mirrors satellite due to be launched in 1999. Since CCD's are sensitive to radiation other than X-rays, namely Optical and UV light, filters are necessary to prevent this radiation from reaching the detector sensitive area. Three types of filters were developed, to be used alternatively depending on target source. Here we report on the medium and thin filters developed by MOXTEK Inc. in Orem, Utah, while the thick ones, developed at the Max-Planck-Institut fur Extraterrestrische Physik (MPE, Germany) have been described elsewhere. The two filters, described here, have a 1600 /spl Ari…

Study and implementation of a soft X-ray 100 eV -20 keV fixed exit monochromator system

2006

We describe a “built in house” X-ray monochromator which produces a fixed exit X-ray beam tunable in the full energy range 0.1 - 20 keV. The system is based on a double diffraction on two large size parallel crystals positioned using a remotely controlled micropositioning system in order to keep the position of the monochromatic beam for any chosen energy. Up to six different diffracting elements can be selected without breaking the vacuum. This allows to cover the full energy range of interest. The system is part of an upgrading project of the XACT facility at the Istituto Nazionale di Astrofisica - Osservatorio Astronomico di Palermo G.S. Vaiana, and will be employed for the testing and c…

EBIT diagnostics using X-ray spectra of highly ionized Ne

2003

We have carried out a detailed analysis of highly ionized neon spectra collected at the NIST EBIT using an NTD germanium X-ray microcalorimeter developed at the Harvard-Smithsonian Center for Astrophysics [Nucl. Instr. and Meth. A 444 (2000) 156]. Our attention was focused especially on the Ne IX He-like triplet to check electron density diagnostics through the intercombination/forbidden line ratio. We have investigated possible effects of the ion dynamics on the plasma emission line intensities, looking at the dependence of the count-rate and the charge state distribution on the electron beam energy and current. The temperature and spatial distribution of the neon ions, and hence the overl…

An optimized time screening algorithm for ROSAT PSPC and HRI observations

1998

We have developed a model-independent time screening optimization algorithm to cope with significant contamination spikes in the ROSAT PSPC/HRI bacground light-curves. The rejection criteria are based on the maximization of faint sources signal-to-noise ratio. The algorithm tuning parameters have been optimized through performing a wide set of runs on both simulated and real data. We have verified that the application of our selection criteria to the case of long exposure PSPC observations yields an increase of the number of faint sources ( SNR ) of up to 100% with a rejection of up to the 8% of the exposure time. At the same time, we obtain an average signal-to-noise ratio gain of 3% for t…

Ethanol Modulates Corticotropin Releasing Hormone Release From the Rat Hypothalamus: Does Acetaldehyde Play a Role?

2010

BACKGROUND AND METHODS Ethanol (EtOH) activates hypothalamic-pituitary-adrenal (HPA) axis, resulting in adrenocorticotropin hormone, glucocorticoid release, and in modifications of the response of the axis to other stressors. The initial site of EtOH action within the HPA system seems to be the hypothalamus. Thus, to determine the mechanisms responsible for these effects, we investigated: (i) whether EtOH was able to release corticotrophic releasing hormone (CRH) from incubated hypothalamic explants; (ii) whether acetaldehyde (ACD), its first metabolite formed in the brain by catalase activity, might play a role in EtOH activity. To this aim, rat hypothalamic explants were incubated with: (…

Electroplated Indium Bumps as Thermal and Electrical Connections of NTD-Ge Sensors for the Fabrication of Microcalorimeter Arrays

2012

We are developing a method to build arrays of Ge-based microcalorimeters for soft X-rays detection using micro-photolithographic techniques. A key element of the process is the electrical and thermal connection between the germanium sensors and the interconnection electrical tracks, that lay on a substrate acting as mechanical support and thermal sink. The geometry of the sensors, that have a square base truncated pyramid shape, makes feasible a connection through indium soldering. We describe a technique, based on microlithography and electroplating, adopted to grow indium bumps of a few tens of square microns of area and several microns high on top of the contact pads patterned on the sub…

Soft X-Ray Irradiation of Methanol Ice: Implication for H2CO Formation in Interstellar Regions

2010

We performed 0.3 keV soft X-ray irradiation of a methanol ice at 8 K under ultra-high vacuum conditions. To the best of our knowledge, this is the first time that soft X-rays are used to study photolysis of ice analogs. Despite the low irradiation dose of 10{sup -6} photons molecule{sup -1}, the formation of formaldehyde has been observed. The results of our experiments suggest that X-rays may be a promising candidate to the formation of complex molecules in regions where UV radiation is severely inhibited.

B-MINE, the balloon-borne microcalorimeter nuclear line explorer

2001

B-MINE is a concept for a balloon mission designed to probe the deepest regions of a supernova explosion by detecting Ti-44 emission at 68 keV with spatial and spectral resolutions that are sufficient to determine the extent and velocity distribution of the Ti-44 emitting region. The payload introduces the concept of focusing optics and microcalorimeter spectroscopy to nuclear line emission astrophysics. B-MINE has a thin, plastic foil telescope multilayered to maximize the reflectivity in a 20 keV band centered at 68 keV and a microcalorimeter array optimized for the same energy band. This combination provides a reduced background, an energy resolution of 50 eV and a 3sigma sensitivity in …

The filter wheel and filters development for the X-IFU instruments onboard Athena

2016

Athena is the large mission selected by ESA in 2013 to investigate the science theme “Hot and Energetic Universe” and presently scheduled for launch in 2028. One of the two instruments located at the focus of the 12 m-long Athena telescope is the X-ray Integral Field Unit (X-IFU). This is an array of TES microcalorimeters that will be operated at temperatures of 50 mK in order to perform high resolution spectroscopy with an energy resolution down to 2.5 eV at energies &lt; 7 keV. In order to cope with the large dynamical range of X-ray fluxes spanned by the celestial objects Athena will be observing, the X-IFU will be equipped with a filter wheel. This will allow the user to fine tune the i…

The x-ray microcalorimeter spectrometer onboard Athena

2012

Trabajo presentado a la conferencia: "Space Telescopes and Instrumentation: Ultraviolet to Gamma Ray" celebrada en Amsterdam (Holanda) el 1 de julio de 2012.-- et al.

ATHENA X-IFU thermal filters development status toward the end of the instrument phase-A

2018

Copyright 2018 Society of Photo-Optical Instrumentation Engineers (SPIE). One print or electronic copy may be made for personal use only. Systematic reproduction and distribution, duplication of any material in this paper for a fee or for commercial purposes, or modification of the content of the paper are prohibited. The X-ray Integral Field Unit (X-IFU) is one of the two instruments of the Athena astrophysics space mission approved by ESA in the Cosmic Vision 2015-2025 Science Programme. The X-IFU consists of a large array of transition edge sensor micro-calorimeters that will operate at 100 mK inside a sophisticated cryostat. A set of thin filters, highly transparent to X-rays, will be m…

The scientific payload on-board the HERMES-TP and HERMES-SP CubeSat missions

2021

HERMES (High Energy Rapid Modular Ensemble of Satellites) Technological and Scientific pathfinder is a space borne mission based on a LEO constellation of nano-satellites. The 3U CubeSat buses host new miniaturized detectors to probe the temporal emission of bright high-energy transients such as Gamma-Ray Bursts (GRBs). Fast transient localization, in a field of view of several steradians and with arcmin-level accuracy, is gained by comparing time delays among the same event detection epochs occurred on at least 3 nano-satellites. With a launch date in 2022, HERMES transient monitoring represents a keystone capability to complement the next generation of gravitational wave experiments. In t…

ROSAT PSPC/HRI observations of the open cluster NGC 2422

2002

We present the results of a ROSAT study of NGC 2422, a southern open cluster at a distance of about 470 pc, with an age close to the Pleiades. Source detection was performed on two observations, a 10-ks PSPC and a 40-ks HRI pointing, with a detection algorithm based on wavelet transforms, particularly suited to detecting faint sources in crowded fields. We have detected 78 sources, 13 of which were detected only with the HRI, and 37 detected only with the PSPC. For each source, we have computed the 0.2-2.0 keV X-ray flux. Using optical data from the literature and our own low-dispersion spectroscopic observations, we find candidate optical counterparts for 62 X-ray sources, with more than 8…

A fully planar approach to the construction of X-Ray microcalorimeters with doped Germanium sensors

2008

We have investigated a fully planar technology for the development of arrays of X-ray microcalorimeters with doped germanium thermal sensor. We describe the proposed approach and show promising results obtained with the deep etching of germanium, the most critical step of the whole process.

Analytical description of lobster eye and similar multi-foil optics

2015

Analytical equations describing lobster eye optical parameters on dependence on its geometric parameters are presented. The paper partially gives review of main previously known results. At next, the paper gives new results discussing parameters, that were not included to previously published models but may be significant. The results are applicable for a Schmidt as well as for an Angel lobster eye and for some related multi-foil systems.

Testing the X-IFU calibration requirements: an example for quantum efficiency and energy resolution

2018

With its array of 3840 Transition Edge Sensors (TESs) operated at 90 mK, the X-Ray Integral Field Unit (X-IFU) on board the ESA L2 mission Athena will provide spatially resolved high-resolution spectroscopy (2.5 eV FWHM up to 7 keV) over the 0.2 to 12 keV bandpass. The in-flight performance of the X-IFU will be strongly affected by the calibration of the instrument. Uncertainties in the knowledge of the overall system, from the filter transmission to the energy scale, may introduce systematic errors in the data, which could potentially compromise science objectives - notably those involving line characterisation e.g. turbulence velocity measurements - if not properly accounted for. Defining…

Surface investigation and aluminum oxide estimation on test filters for the ATHENA X-IFU and WFI detectors

2016

The ATHENA mission provides the demanded capabilities to address the ESA science theme "Hot and Energetic Universe". Two complementary instruments are foreseen: the X-IFU (X-ray Integral Field Unit) and WFI (Wide Field Imager). Both the instruments require filters to avoid that the IR radiation heats the X-IFU cryogenic detector and to protect the WFI detector from UV photons. Previous experience on XMM filters recommends to employ bilayer membrane consisting of aluminum deposited on polyimide. In this work, we use the X-ray Photoelectron Spectroscopy (XPS) to quantify the native aluminum oxide thickness that affects the spectral properties of the filter. The estimation of the oxide thickne…

The TES-based cryogenic anticoincidence detector for IXO: First results from large area prototypes

2010

The technique which combines high resolution spectroscopy with imaging capability is a powerful tool to extract fundamental information in X-ray Astrophysics and Cosmology. TES (Transition Edge Sensors)-based microcalorimeters match at best the requirements for doing fine spectroscopy and imaging of both bright (high count rate) and faint (poor signal-to-noise ratio) sources. For this reason they are considered among the most promising detectors for the next high energy space missions and are being developed for use on the focal plane of the IXO (International X-ray Observatory) mission. In order to achieve the required signal-to-noise ratio for faint or diffuse sources it is necessary to r…

Characterization of thin plastic foils for applications in X-ray optics technology

2007

Thin plastic foils are being investigated to build shell optics for X-ray telescopes. Compared to polished glass optics, the advantage is in terms of increased collecting area, light weight and lower cost. Plastic material is also desirable to allow deformation into a complete surface of revolution. We collected plastic materials of common use for industrial applications and also specialty materials developed for the electronic industry. A comparative study was then performed to evaluate the optical quality of the selected plastic films. Surface analysis was carried out with topographic instruments to investigate the microroughness of our samples at different scan lengths. Preliminary resul…

The Large Observatory For x-ray Timing

2014

The Large Observatory For x-ray Timing (LOFT) was studied within ESA M3 Cosmic Vision framework and participated in the final down-selection for a launch slot in 2022-2024. Thanks to the unprecedented combination of effective area and spectral resolution of its main instrument, LOFT will study the behaviour of matter under extreme conditions, such as the strong gravitational field in the innermost regions of accretion flows close to black holes and neutron stars, and the supra-nuclear densities in the interior of neutron stars. The science payload is based on a Large Area Detector (LAD, 10 m 2 effective area, 2-30 keV, 240 eV spectral resolution, 1 deg collimated field of view) and a WideFi…

Fine Thermal Structure of a Coronal Active Region

2007

著者人数：12名

Thermal shielding of the SIMBOL-X mirror assembly

2007

The thermal modeling of the SIMBOL-X X-ray telescope has shown that thermal shielding of both the telescope ends is one possibility to ensure temperature uniformity of the mirror and to reduce the required heating power. The design of the thermal shielding must minimize the thermal exchange in a trade off between transparency of the shields to soft X-rays and mechanical robustness. We discuss two possible designs of the thermal shielding of the mirror module and show transmission curves at X-ray wavelengths.

Manufacturing an active X-ray mirror prototype in thin glass

2015

Adjustable mirrors equipped with piezo actuators are commonly used at synchrotron and free-electron laser (FEL) beamlines, in order to optimize their focusing properties and sometimes to shape the intensity distribution of the focal spot with the desired profile. Unlike them, X-ray mirrors for astronomy are much thinner in order to enable nesting and reduce the areal mass, and the application of piezo actuators acting normally to the surface appears much more difficult. There remains the possibility to correct the deformations using thin patches that exert a tangential strain on the rear side of the mirror: some research groups are already at work on this approach. The technique reported he…

Development of the wide field imager for Athena

2015

The WFI (Wide Field Imager) instrument is planned to be one of two complementary focal plane cameras on ESA's next X-ray observatory Athena. It combines unprecedented survey power through its large field of view of 40 arcmin x 40 arcmin together with excellent count-rate capability (>= 1 Crab). The energy resolution of the silicon sensor is state-of-the-art in the energy band of interest from 0.2 keV to 15 keV, e.g. the full width at half maximum of a line at 6 keV will be <= 150 eV until the end of the nominal mission phase. This performance is accomplished by using DEPFET active pixel sensors with a pixel size of 130 μm x 130 μm well suited to the on-axis angular resolution of 5 arcsec of…

A Temperature-Dependent X-Ray Absorption Characterization of Test Filters for the ATHENA Mission X-IFU Instrument

2018

In order to work properly, the X-ray Integral Field Unit of the ATHENA mission requires a set of thermal filters that block the infrared radiation, preventing it to reach the detector. Each filter will be mounted and thermally anchored onto a shield of the multistage cryostat and will be kept at the specific temperature of the stage. On the other hand, the filters partially absorb X-rays, and their transmittance has to be carefully characterized. The effect of temperature on the absorption edges of the elements that make up the filters has not been investigated yet. Here, we report the results of a preliminary run on the optical transmission data around the edges of C, N, and O at different…

CESAR: Cryogenic Electronics for Space Applications

2013

Ultra-low temperature sensors provide unprecedented performances in X-ray and far infrared astronomy by taking advantage of physical properties of matter close to absolute zero. CESAR is an FP7 funded project started in December 2010, that gathers six European laboratories around the development of high performances cryogenic electronics. The goal of the project is to provide far-IR, X-ray and magnetic sensors with signal-processing capabilities at the heart of the detectors. We present the major steps that constitute the CESAR work, and the main results achieved so far.

Spectral broadening by quasiparticle pile-up in X-ray microcalorimeters with superconducting absorbers

2004

Long-living quasiparticles can pile-up in a superconducting absorber of an X-ray microcalorimeter when photons are detected at high count rate. These quasiparticles can give a non-negligible contribution to the total heat capacity of the detector thus affecting the pulse height spectrum of detected photons. We investigated this effect with numerical simulations and evaluated the resulting spectral broadening as a function of the photon absorption rate, and the heat capacity of the detector for a NTD germanium microcalorimeter with pure Sn absorber.

Monitoring the stability of thin and medium back-up filters of the Newton-XMM EPIC camera

2003

We are conducting a measurement program on back-up filters of the XMM-Newton EPIC camera aimed at monitoring possible aging effects during the mission lifetime. One thin and one medium EPIC back-up filters have been stored since 1997 in an environment similar to that one of the flight filters (dry nitrogen box before launch, high vacuum after launch). The transmission of the two filters has been measured periodically in the 1900-10000 angstrom wavelength range where effects of aging would be clearly evident. The preliminary results, after 5 years of monitoring, show that a slight aging effect has occurred on both filters which, however, has no significant impact onto the EPIC calibration fo…

Towards an AMTEC-like device based on non-alkali metal for efficient, safe and reliable direct conversion of thermal to electric power

2018

Alkali Metal ThermoElectric Converters directly convert heat into electric energy and have promising applicability in the field of sustainable and renewable energy. The high theoretical efficiency, close to Carnot's cycle, the lack of moving parts, and the interesting operating temperature range drive the search for new materials able to ensure safe and reliable operation at competitive costs.The present work focuses on the design of a non-alkali metal based cell and on the fabrication of a testing device to validate the design work. The selection of a new operating fluid for the cell improves durability, reliability and safety of the device. Finally, we discuss possible applications to alr…

Emission-Line Intensity Ratios in F[CLC]e[/CLC] [CSC]xvii[/CSC] Observed with a Microcalorimeter on an Electron Beam Ion Trap

2000

We report new observations of emission line intensity ratios of Fe XVII under controlled experimental conditions, using the National Institute of Standards and Technology electron beam ion trap (EBIT) with a microcalorimeter detector. We compare our observations with collisional-radiative models using atomic data computed in distorted wave and R-matrix approximations, which follow the transfer of the polarization of level populations through radiative cascades. Our results for the intensity ratio of the 2p6 1S0-2p53d 1P1 15.014 A line to the 2p6 1S0-2p53d 3D1 15.265 A line are 2.94 ± 0.18 and 2.50 ± 0.13 at beam energies of 900 and 1250 eV, respectively. These results are not consistent wit…

Temperature effects on the performances of the ATHENA X-IFU thermal filters

2016

The X-Ray Integral Field Unit (X-IFU) detector on-board ATHENA is an array of TES micro-calorimeters that will operate at ~50 mK. In the current investigated design, five thermal filters (TF) will be mounted on the cryostat shields to attenuate IR radiative load and avoid energy resolution degradation due to photon shot noise. Each filter consists of a thin polyimide film (~50 nm thick) coated with aluminum (~30 nm thick). Since the TF operate at different temperatures in the range 0.05-300 K, it is relevant to study how temperature affects their mechanical/optical performances (e.g. near edge absorption fine structures of the atomic elements in the filter material). Such results are crucia…

Calibration of the XRT-SOLARB flat mirror samples at the XACT Facility of INAF-OAPA

2004

The X-Ray Telescope (XRT) experiment on-board the Japanese satellite SOLAR-B (launch in 2006) is equipped with a modified Wolter I grazing incidence X-ray telescope (focal length 2700 mm) to image the full Sun at ~ 1.5" angular resolution onto a 2048 x 2048 back illuminated CCD focal plane detector. The X-ray telescope consisting of one single reflecting shell is coated with ion beam sputtered Iridium over a binding layer of Chromium to provide nearly 5 square centimetres effective area at 60 A. We present preliminary results of X-ray calibrations of the XRT flat mirror samples performed at the X-ray Astronomy Calibration and Testing (XACT) facility of INAF-OAPA. We describe the instrumenta…

The optical blocking filter for the ATHENA wide field imager: Ongoing activities towards the conceptual design

2015

ATHENA is the L2 mission selected by ESA to pursue the science theme "Hot and Energetic Universe" (launch scheduled in 2028). One of the key instruments of ATHENA is the Wide Field Imager (WFI) which will provide imaging in the 0.1-15 keV band over a 40'x40' large field of view, together with spectrally and time-resolved photon counting. The WFI camera, based on arrays of DEPFET active pixel sensors, is also sensitive to UV/Vis photons. Optically generated electron-hole pairs may degrade the spectral resolution as well as change the energy scale by introducing a signal offset. For this reason, the use of an X-ray transparent optical blocking filter is needed to allow the observation of all …

The Cryogenic AntiCoincidence detector for ATHENA: the progress towards the final pixel design

2014

“The Hot and Energetic Universe” is the scientific theme approved by the ESA SPC for a Large mission to be flown in the next ESA slot (2028th) timeframe. ATHENA is a space mission proposal tailored on this scientific theme. It will be the first X-ray mission able to perform the so-called “Integral field spectroscopy”, by coupling a high-resolution spectrometer, the X-ray Integral Field Unit (X-IFU), to a high performance optics so providing detailed images of its field of view (5’ in diameter) with an angular resolution of 5” and fine energy-spectra (2.5eV@E<7keV). The X-IFU is a kilo-pixel array based on TES (Transition Edge Sensor) microcalorimeters providing high resolution spectroscopy …

NTD-GE-based microcalorimeter performance

2000

Our group has been developing x-ray microcalorimeters consisting of neutron transmutation doped (NTD) germanium thermistors attached to superconducting tin absorbers. We discuss the performance of single pixel x-ray detectors, and describe an array technology. In this paper we describe the read-out circuit that allows us to measure fast signals in our detectors as this will be important in understanding the primary cause of resolution broadening. We describe briefly a multiplexing scheme that allows a number of different calorimeters to be read out using a single JFET. We list the possible causes of broadening and give a description of the experiment which best demonstrates the cause of the…

The enhanced X-ray Timing and Polarimetry mission—eXTP

2019

In this paper we present the enhanced X-ray Timing and Polarimetry mission - eXTP. eXTP is a space science mission designed to study fundamental physics under extreme conditions of density, gravity and magnetism. The mission aims at determining the equation of state of matter at supra-nuclear density, measuring effects of QED, and understanding the dynamics of matter in strong-field gravity. In addition to investigating fundamental physics, eXTP will be a very powerful observatory for astrophysics that will provide observations of unprecedented quality on a variety of galactic and extragalactic objects. In particular, its wide field monitoring capabilities will be highly instrumental to det…

Radio frequency shielding of thin aluminized plastic filters investigated for the ATHENA X-IFU detector

2018

Copyright 2018 Society of Photo-Optical Instrumentation Engineers (SPIE). One print or electronic copy may be made for personal use only. Systematic reproduction and distribution, duplication of any material in this paper for a fee or for commercial purposes, or modification of the content of the paper are prohibited. The X-ray Integral Field Unit (X-IFU) is one of the two detectors of the ATHENA astrophysics space mission approved by ESA in the Cosmic Vision 2015-2025 Science Programme. The X-IFU consists of a large array of transition edge sensors (TES) micro-calorimeters covering a field of view of 5' diameter, sensitive in the energy range 0.2-12 keV, and providing a spectral resolution…

Visible light apparatus for preliminary tests of x-ray optics

2006

We report a useful visible light testing procedure for a first analysis of soft X-ray grazing incidence optics (0.1-2 keV). Although diffraction is a limit in the application of this method, great advantages are obtained by running the tests in air with direct access to modify the geometrical mounting of the individual mirror shells. We present the experimental apparatus and show the first results of the investigation of light weight optics based on plastic foil material and comparison with results obtained with an X-ray beam.

Calibration of the Solar-B x-ray optics

2005

The Solar-B X-ray telescope (XRT) is a grazing-incidence modified Wolter I X-ray telescope, of 35 cm inner diameter and 2.7 m focal length. XRT, designed for full sun imaging over the wavelength 6-60 Angstroms, will be the highest resolution solar X-Ray telescope ever flown. Images will be recorded by a 2048 X 2048 back-illuminated CCD with 13.5 μm pixels (1 arc-sec/pixel ) with full sun field of view. XRT will have a wide temperature sensitivity in order to observe and discriminate both the high (5-10 MK) and low temperature (1-5 MK) phenomena in the coronal plasma. This paper presents preliminary results of the XRT mirror calibration performed at the X-ray Calibration Facility, NASA-MSFC,…

Absorption band at 7.6 eV induced by γ-irradiation in silica glasses

2001

Optical absorption of defects induced by γ-irradiation in both natural and synthetic silica is experimentally investigated in the vacuum-ultraviolet (UV) range. Our results show that γ-rays, in a dose range of 1000 Mrad, induce an absorption band centered at 7.6 eV, the so-called E band, whose growth kinetics is not related to γ-activated precursors but to defects of the glassy matrix directly induced via the breaking of Si–O bonds occurring under γ-irradiation. Moreover, we observe that γ-rays do not bleach the E band present in some silica samples before irradiation, so ruling out that the associated defects can be precursors of the paramagnetic E′ centers, also induced by γ-irradiation.

Thermalization efficiency of superconducting absorbers for thermal X-ray microcalorimeters

2004

The persistence of long living quasiparticles created in the energy thermalization process can affect the performances of a thermal X-ray microcalorimeter with superconducting absorber. Numerical simulations indicate that in an ab- sorber made of high-purity Sn, operated at temperatures lower than 100 mK, up to 60% of the deposited energy can remain trapped in the quasiparticle system for a time much longer than the time scale of the thermal sensor response, producing a reduction of the SNR of the detector. Other pure superconductors can present the same problem and therefore a microscopic analysis of the physical properties can be useful to identify suitable absorbing materials and optimiz…

Electroplated bismuth absorbers for planar NTD-Ge sensor arrays applied to hard x-ray detection in astrophysics

2018

Single sensors or small arrays of manually assembled neutron transmutation doped germanium (NTD-Ge) based microcalorimeters have been widely used as high energy-resolution detectors from infrared to hard X-rays. Several planar technological processes were developed in the last years aimed at the fabrication of NTD-Ge arrays, specifically designed to produce soft X-ray detectors. One of these processes consists in the fabrication of the absorbers. In order to absorb efficiently hard X-ray photons, the absorber has to be properly designed and a suitable material has to be employed. Bismuth offers interesting properties in terms of absorbing capability, of low heat capacity (needed to obtain h…

Calibration of the SphinX experiment at the XACT facility in Palermo

2008

Three of the four detectors of the SphinX experiment to be flown on the Russian mission Coronas-Photon have been measured at the XACT Facility of the Palermo Observatory at several wavelengths in the soft X-ray band. We describe the instrumental set-up and report some measurements. The analysis work to obtain the final calibration is still in progress.

Preliminary assessment of the ATHENA/WFI non-X-ray background

2017

We present a preliminary assessment of the non-X-ray background for the WFI on board ATHENA conducted at IAAT in the context of the collaborative background and radiation damage working group activities. Our main result is that in the baseline configuration originally assumed for the camera the requirement on the level of non-X-ray background could not be met. In light of the results of Geant4 simulations we propose and discuss a possible optimization of the camera design and pinpoint some open issues to be addressed in the next phase of investigation. One of these concerns the possible contribution to the non-X-ray background from soft protons and ions funneled to the focal plane through t…

Manufacturing and testing a thin glass mirror shell with piezoelectric active control

2015

Optics for future X-ray telescopes will be characterized by very large aperture and focal length, and will be made of lightweight materials like glass or silicon in order to keep the total mass within acceptable limits. Optical modules based on thin slumped glass foils are being developed at various institutes, aiming at improving the angular resolution to a few arcsec HEW. Thin mirrors are prone to deform, so they require a careful integration to avoid deformations and even correct forming errors. On the other hand, this offers the opportunity to actively correct the residual deformation: a viable possibility to improve the mirror figure is the application of piezoelectric actuators onto t…

Thin plastic foil X-ray optics with spiral geometry

2007

Winding a plastic foil ribbon into spiral cylinder or spiral cones we can design and build single or multiple reflection X-ray grazing incidence focusing optics with potential applications in Astronomy as well as experimental physics. The use of thin plastic foils from common industrial applications and of a mounting technique which does not require the construction of mandrels make these optics very cost effective. A spiral geometry focusing optic produces an annular image of a point source with the angular size of the annulus depending mainly on the pitch of the winding and the focal length. We use a ray-tracing code to evaluate the performances of cylindrical, and double conical spiral g…

Magnetic shielding of soft protons in future X-ray telescopes: the case of the ATHENA Wide Field Imager

2018

Both the interplanetary space and the Earth magnetosphere are populated by low energy ($\leq300$ keV) protons that are potentially able to scatter on the reflecting surface of Wolter-I optics of X-ray focusing telescopes and reach the focal plane. This phenomenon, depending on the X-ray instrumentation, can dramatically increase the background level, reducing the sensitivity or, in the most extreme cases, compromising the observation itself. The use of a magnetic diverter, deflecting protons away from the field of view, requires a detailed characterization of their angular and energy distribution when exiting the mirror. We present the first end-to-end Geant4 simulation of proton scattering…

The Cryogenic Anticoincidence Detector for ATHENA-XMS

2012

The TES cryogenic detectors, due to their high spectral resolution and imaging capability in the soft X-ray domain, are the reference devices for the next proposed space missions whose aims are to characterize the spectra of faint or diffuse sources. ATHENA is the re-scoped IXO mission, and one of its focal plane instrument is the X-ray Microcalorimeter Spectrometer (XMS) working in the energy range 0.3-10 keV. XMS will be able to achieve the proposed scientific goals if a background lower than 0.02 cts/cm2/s/keV is guaranteed. The studies performed by GEANT4 simulations depict a scenario where it is mandatory to use an active Anti-Coincidence (AC) to reduce the expected background in the L…

Electrical connections and driving electronics for piezo-actuated x-ray thin glass optics

2016

Use of thin glass modular optics is a technology currently under study to build light, low cost, large area X-ray telescopes for high energy astrophysics space missions. The angular resolution of such telescopes is limited by local deviations from the ideal shape of the mirrors. One possible strategy to improve it consists in actively correcting the mirror profile by gluing thin ceramic piezo-electric actuators on the back of the glasses. A large number of actuators, however, requires several electrical connections to drive them with the different needed voltages. We have developed a process for depositing conductive paths directly on the back of non-planar thin foil mirrors by means of a p…

Baseline design of the thermal blocking filters for the X-IFU detector on board ATHENA

2014

ATHENA is an advanced X-ray observatory designed by a large European consortium to address the science theme "Hot and Energetic Universe" recently selected by ESA for L2 – the second Large-class mission within the Cosmic Vision science program (launch scheduled in 2028). One of the key instruments of the mission is the X-ray Integral Field Unit (X-IFU), an array of Transition Edge Sensor (TES) micro-calorimeters with high energy resolution (2.5 eV @ 6 keV) in the energy range 0.2÷12 keV, operating at the focal plane of a large effective area high angular resolution (5" HEW) grazing incidence X-ray telescope. The X-IFU operates at temperatures below 100 mK and thus requires a sophisticated c…

Status of the EPIC thin and medium filters on-board XMM-Newton after more than 10 years of operation I: laboratory measurements on back-up filters

2013

After more than ten years of operation of the EPIC camera on board the X-ray observatory XMM-Newton, we have reviewed the status of its Thin and Medium filters by performing both laboratory measurements on back-up filters, and analysis of data collected in-flight. We have selected a set of Thin and Medium back-up filters among those still available in the EPIC consortium, and have started a program to investigate their status by different laboratory measurements including: UV/VIS transmission, X-ray transmission, RAMAN IR spectroscopy, X-Ray Photoelectron Spectroscopy, and Atomic Force Microscopy. We report the results of the measurements conducted up to now, and point out some lessons lear…

Combined heat and power generation with a HCPV system at 2000 suns

2015

In the framework of the FAE “Fotovoltaico ad Alta Efficienza” (“High Efficiency Photovoltaic”) Research Project funded by the Sicilian Region under the program PO FESR Sicilia 2007/2013 4.1.1.1, we have developed an innovative solar CHP system for the combined production of heat and power at the high concentration level of 2000 suns [1]. This work shows the experimental results obtained on FAE-HCPV modules and analyses the behaviour of the system. The solar radiation is concentrated on commercial InGaP/InGaAs/Ge triple-junction solar cells designed for intensive work. The primary optics is a rectangular off-axis parabolic mirror (with a size of 46x46 = 2116 cm2 in a projection normal to the…

Chemical Evolution of Interstellar Methanol Ice Analogs upon Ultraviolet Irradiation: The Role of the Substrate

2018

An important issue in the chemistry of interstellar ices is the role of dust materials. In this work, we study the effect of an amorphous water-rich magnesium silicate deposited onto ZnSe windows on the chemical evolution of ultraviolet-irradiated methanol ices. For comparison, we also irradiate similar ices deposited onto bare ZnSe windows. Silicates are produced at relatively low temperatures exploiting a sol-gel technique. The chemical composition of the synthesized material reflects the forsterite stoichiometry. Si-OH groups and magnesium carbonates are incorporated during the process. The results show that the substrate material does affect the chemical evolution of the ice. In particu…

Metal thin-film temperature sensor embedded in heat-sink for CPV cells characterization

2014

The efficiency of a photovoltaic cell is dependent on its temperature, for this reason an accurate measurement of this parameter is important to fully characterize the device and to optimize its performance. For CPV applications a significant heat flux is needed to remove excess heat from the cell towards a heat sink, making it difficult to derive the cell temperature. In fact, measurements performed directly between the cell and the heat-sink, by use of commercial bulk sensors, would produce a significant disturbance in the heat flow; on the other hand, a measurement performed out of the cell / heat sink axis would be subject to large uncertainties, due to the high radial temperature gradi…

The Athena X-ray Integral Field Unit: a consolidated design for the system requirement review of the preliminary definition phase

2023

The Athena X-ray Integral Unit (X-IFU) is the high resolution X-ray spectrometer, studied since 2015 for flying in the mid-30s on the Athena space X-ray Observatory, a versatile observatory designed to address the Hot and Energetic Universe science theme, selected in November 2013 by the Survey Science Committee. Based on a large format array of Transition Edge Sensors (TES), it aims to provide spatially resolved X-ray spectroscopy, with a spectral resolution of 2.5 eV (up to 7 keV) over an hexagonal field of view of 5 arc minutes (equivalent diameter). The X-IFU entered its System Requirement Review (SRR) in June 2022, at about the same time when ESA called for an overall X-IFU redesign (i…

The focal plane assembly for the Athena X-ray Integral Field Unit instrument

2016

This paper summarizes a preliminary design concept for the focal plane assembly of the X-ray Integral Field Unit on the Athena spacecraft, an imaging microcalorimeter that will enable high spectral resolution imaging and point-source spectroscopy. The instrument's sensor array will be a ~ 3840-pixel transition edge sensor (TES) microcalorimeter array, with a frequency domain multiplexed SQUID readout system allowing this large-format sensor array to be operated within the thermal constraints of the instrument's cryogenic system. A second TES detector will be operated in close proximity to the sensor array to detect cosmic rays and secondary particles passing through the sensor array for off…

Modeling the energy thermalization of X-ray photons in a microcalorimeter with superconducting absorber

2003

We present a modeling of the response of a microcalorimeter to the absorption of X-ray photons, based on the main microscopical processes responsible for the energy thermalization. In particular, we have modeled a microcalorimeter with superconducting tin absorber (350 micron x 350 micron x 7 micron) and neutron transmutation doped (NTD) germanium thermistor (75 micron x 50 micron x 150 micron). Such a detector, operated at 60 mK, is expected to achieve a spectral resolution as good as 1 eV FWHM in the soft X-ray energy range, based on the known sources of thermal and electronic noise. Nevertheless, the best spectral resolution measured in laboratory experimental tests is of about 5 eV FWHM…

The X-ray Integral Field Unit (X-IFU) for Athena

2014

Athena is designed to implement the Hot and Energetic Universe science theme selected by the European Space Agency for the second large mission of its Cosmic Vision program. The Athena science payload consists of a large aperture high angular resolution X-ray optics (2 m2 at 1 keV) and twelve meters away, two interchangeable focal plane instruments: the X-ray Integral Field Unit (X-IFU) and the Wide Field Imager. The X-IFU is a cryogenic X-ray spectrometer, based on a large array of Transition Edge Sensors (TES), oering 2.5 eV spectral resolution, with approximately 5" pixels, over a field of view of 5' in diameter. In this paper, we present the X-IFU detector and readout electronics princi…

Optical/UV filters for the EPIC experiment

2002

The European Photon Imaging Cameras (EPIC) is an experiment based on cooled CCD's on board the ESA X-ray Multi Mirrors satellite due to be launched in 1999. Since CCD's are sensitive to radiation other than X-rays, namely optical and UV light, filters are necessary to prevent this radiation from reaching the detector sensitive area. Three types of filters were developed, to be used alternatively depending on target source. Here we report on the medium and thin filters developed by MOXTEK Inc. in Orem, Utah, while the thick ones, developed at the Max-Planck-Institut fuer Extraterrestrische Physik (MPE, Germany) have been described elsewhere. The two filters, here described, have a 1600 angst…

Calibration of the Lunar Orbital X-ray Fluorescence Imaging Spectrometer (LOXIA) of Chang'E-1 satellite at INAF-OAPA

2007

The Lunar Orbital X-ray Fluorescence Imaging Spectrometer (LOXIA) designed and constructed at the Institute of High Energy Physics of the Chinese Academy of Sciences to perform chemical composition analysis of the Moon surface will operate on-board the Chang'E-1 mission, the first Chinese lunar spacecraft to be launched in 2007. We report the main results of the calibration measurements that we have performed using the X-ray beamline of the XACT facility of INAFOsservatorio Astronomico di Palermo G.S. Vaiana to determine the quantum efficiency of the XRS detector in the soft X-rays as a function of photon energy and angle of incidence.

The cryogenic anticoincidence detector for ATHENA-XMS: preliminary results from the new prototype

2012

ATHENA has been the re-scoped IXO mission, and one of the foreseen focal plane instrument was the X-ray Microcalorimeter Spectrometer (XMS) working in the energy range 0.3-10 keV, which was a kilo-pixel array based on TES (Transition Edge Sensor) detectors. The need of an anticoincidence (AC) detector is legitimated by the results performed with GEANT4 simulations about the impact of the non x-ray background onto XMS at L2 orbit (REQ. < 0.02 cts/cm2/s/keV). Our consortium has both developed and tested several samples, with increasing area, in order to match the large area of the XMS (64 mm2). Here we show the preliminary results from the last prototype. The results achieved in this work off…

The Large Area Detector onboard the eXTP mission

2018

The eXTP (enhanced X-ray Timing and Polarimetry) mission is a major project of the Chinese Academy of Sciences (CAS) and China National Space Administration (CNSA) currently performing an extended phase A study and proposed for a launch by 2025 in a low-earth orbit. The eXTP scientific payload envisages a suite of instruments (Spectroscopy Focusing Array, Polarimetry Focusing Array, Large Area Detector and Wide Field Monitor) offering unprecedented simultaneous wide-band X-ray spectral, timing and polarimetry sensitivity. A large European consortium is contributing to the eXTP study and it is expected to provide key hardware elements, including a Large Area Detector (LAD). The LAD instrumen…

The young hard active Sun: soft X-ray irradiation of tryptophan in water solutions

2010

AbstractThe X-ray emission of the young Sun was much harder and intense than today and might have played a significant role in the evolution of complex organics in protoplanetary environments. We investigate the effects of soft X-rays on tryptophan molecules in aqueous solutions at room temperature. As results of the irradiation experiments we detect several light species indicative of fragmentation, together with large molecular structures such as tryptophan dipeptide and tripeptide. Complexification is more evident in H2O solution than in D2O, probably due to isotopic effects. The abundances of peptides depend on the irradiation dose and decrease with increasing energy deposition. Radical…

Development of the UV/ion shields for the Advanced X-ray Astrophysics Facility high-resolution camera (AXAF HRC)

1994

The Advanced X-ray Astrophysics Facility (AXAF) is a major NASA space observatory (launch 1998). One of its two focal plane detectors is the High Resolution Camera (HRC) assembly consisting of two microchannel plate (MCP) based detectors. Key components of the two HRC detectors are UV/Ion shields consisting of metalized sub-micron plastic membranes, designed to prevent UV light and low energy charged particles from reaching the detectors' sensitive surfaces. We discuss the design issues and present results of recent measurements and tests. Soft X-ray/UV transmission measurements have been conducted at the Space Science Laboratory (SSL), University of California at Berkeley, and at the Osser…

Design and optimization of the wide-field spectrometer for EDGE mission

2007

Efficiency of concentration photovoltaic cells governed by luminescence processes

2013

The development of multi-junctions III-V semiconductors solar cells, that combine high conversion efficiency (over 40%) and capability of working under high illumination intensity (up to 1000 suns), has stimulated a rapid growth of concentrating photovoltaic (CPV) technology. The performance of these cells is based on the matching between the semiconductors band gap and the solar spectrum so as to optimize the current balancing between the subcells. This requirement is also important in connection with the CPV modules using lenses, mirrors, optical coupling compounds that introduce a wavelength dependent response to the sunlight. Therefore, care must be exercised in designing optimum cells …

Calibration of the XRT-SOLARB flight filters at the XACT facility of INAF-OAPA

2004

The X-Ray Telescope (XRT) experiment on-board the Japanese satellite SOLAR-B (launch in 2006) aimed at providing full Sun field of view at ~ 1.5" angular resolution, will be equipped with two wheels of focal-plane filters to select spectral features of X-ray emission from the Solar corona, and a front-end filter to significantly reduce the visible light contamination. We present the results of the X-ray calibrations of the XRT flight filters performed at the X-ray Astronomy Calibration and Testing (XACT) facility of INAF-OAPA. We describe the instrumental set-up, the adopted measurement technique, and present the transmission vs. energy and position measurements.

Optimization of the Optical Components in a Reflective High CPV Module

2014

Filters for X-Ray Detectors on Space Missions

2022

Thin filters and gas-tight windows are used in space to protect sensitive X-ray detectors from out-of-band electromagnetic radiation, low-energy particles, and molecular contamination. Though very thin and made of light materials, filters are not fully transparent to X-rays. For this reason, they ultimately define the detector quantum efficiency at low energies. In this chapter, we initially provide a brief overview of filter materials and specific designs adopted on space experiments with main focus on detectors operating at the focal plane of grazing incidence X-ray telescopes. We then provide a series of inputs driving the design and development of filters for high-energy astrophysics sp…

Simple gas scintillation proportional counter soft x-ray detector for laboratory usage

1994

Magnetic activity and the solar corona: first results from the Hinode satellite

2007

The structure, dynamics and evolution of the solar corona are governed by the magnetic field. In spite of significant progresses in our insight of the physics of the so- lar corona, several problems are still under debate, e.g. the role of impulsive events and waves in coronal heating, and the origin of eruptions, flares and CMEs. The Hinode mis- sion has started on 22 september 2006 and aims at giving new answers to these questions. The satellite contains three main instruments, two high resolution telescopes, one in the optical and one in the X-ray band, and an EUV imaging spectrometer. On the Italian side, INAF/Osservatorio Astronomico di Palermo has contributed with the ground-calibrati…

UV-Visible down conversion based on nanosized silica promising for CPV applications

2014

The European Photon Imaging Camera on XMM-Newton: The MOS Cameras

2000

The EPIC focal plane imaging spectrometers on XMM-Newton use CCDs to record the images and spectra of celestial X-ray sources focused by the three X-ray mirrors. There is one camera at the focus of each mirror; two of the cameras contain seven MOS CCDs, while the third uses twelve PN CCDs, defining a circular field of view of 30 arcmin diameter in each case. The CCDs were specially developed for EPIC, and combine high quality imaging with spectral resolution close to the Fano limit. A filter wheel carrying three kinds of X-ray transparent light blocking filter, a fully closed, and a fully open position, is fitted to each EPIC instrument. The CCDs are cooled passively and are under full clos…

A multichannel piezo driver for active mirrors in X-ray telescopes

2016

X-ray astronomy is gaining importance for studying X-ray space sources such as single and binary stars, neutron stars, supernovae and black holes. Due to atmospheric absorption, X-ray telescopes must operate in space on satellites. Among the causes limiting the resolution of modern telescopes are distortions in mirrors shape. An innovative approach for X-ray mirrors aims at correcting the shape errors by means of piezo-ceramic actuators glued to the back of the mirrors, thus creating an “active mirror”. In order to test the viability of shape correction, we fabricated [1] a prototype of a thin glass active mirror, sized 20 cm x 20 cm with a 400 um thickness (Fig. 1). The mirror can allocate…

Astronomical soft x-ray mirrors reflectivity enhancement by multilayer coatings with carbon overcoating

2004

A number of X-ray astronomical missions of near future will make use of hard X-ray optics with broad-band multilayer coatings. However multilayer mirrors can be also useful to enhance the effective area of a given X-ray telescope in the "classical" low energy X-ray band (0.1 – 10 keV), the window where X-ray spectroscopy provides very useful plasma diagnostics) with a consistent gain with respect to usual single-layer reflectors. Multilayers for soft X-rays are based on stacks with constant d-spacing (in order to minimize the loss due to the photoelectric effect). A further gain in reflectivity (however only restricted to the energy range between 0.5 and 4 keV) can be achieved by using a lo…

The ATHENA X-ray Integral Field Unit (X-IFU)

2018

Event: SPIE Astronomical Telescopes + Instrumentation, 2018, Austin, Texas, United States.