Engineered Membranes for Residual Cell Trapping on Microfluidic Blood Plasma Separation Systems: A Comparison between Porous and Nanofibrous Membranes

2021

Blood-based clinical diagnostics require challenging limit-of-detection for low abundance, circulating molecules in plasma. Micro-scale blood plasma separation (BPS) has achieved remarkable results in terms of plasma yield or purity, but rarely achieving both at the same time. Here, we proposed the first use of electrospun polylactic-acid (PLA) membranes as filters to remove residual cell population from continuous hydrodynamic-BPS devices. The membranes hydrophilicity was improved by adopting a wet chemistry approach via surface aminolysis as demonstrated through Fourier Transform Infrared Spectroscopy and Water Contact Angle analysis. The usability of PLA-membranes was assessed through de…

Bi-layer PCL/PLA scaffold prepared by melt for interface tissue engineering

2017

The development of porous multilayer devices allow controlling chemical, physical and mechanical properties by tuning the properties of each single layer. For instance, this feature is of main concern for the production of porous devices designed to regenerate diseased zones at the interface of tissue presenting intrinsic anisotropic structures that gradually change from one tissue to another. In this context, synthetic biodegradable polymers commonly used biomedical applications include polylactic acid (PLA) and polycaprolactone (PCL). In this work, a novel bi-layered multiphasic scaffold (BLS) is presented. It is composed by a PLA-layer presenting pore size in the range of 90-110 μm while…

Computational modeling and experimental characterization of fluid dynamics in micro-CT scanned scaffolds within a multiple-sample airlift perfusion b…

2023

The perfusion of flow during cell culture induces cell proliferation and enhances cellular activity. Perfusion bioreactors offer a controlled dynamic environment for reliable in vitro applications in the tissue engineering field. In this work, to evaluate the effects of the operating parameters of a custom-made bioreactor, numerical simulations were performed to solve the fluid velocity profile inside the bioreactor containing multi-grid support that allows allocating of multiple seeded scaffolds at the same time. The perfusion system exhibited a uniform distribution of liquid velocities within the regions, suitable for cell growth on seeded scaffolds. The effects of the porous microstructu…

Innovative ready to use carrier-bacteria devices for bioremediation of oil contaminated water

2018

Bioremediation, that uses microorganisms to remove environmental pollutants, is the best way of restoring the environment due to its low cost and sustainability. Immobilization of microorganisms capable of degrading specific contaminants significantly promotes bioremediation processes. An innovative ready to use bioremediation system to clean up oil-contaminated water was developed immobilizing highly performant marine and soil HC degrading bacteria, on biodegradable oil-absorbing carriers. Two soil Actinobacteria (Gordonia sp. SoCg, Nocardia sp. SoB) and two marine Gammaproteobacteria (Alcanivorax sp. SK2, Oleibacter sp.5), were immobilized on biopolymeric membranes prepared by electrospin…

Preparation of three-layered porous PLA/PEG scaffold: relationship between morphology, mechanical behavior and cell permeability.

2015

Interface tissue engineering (ITE) is used to repair or regenerate interface living tissue such as for instance bone and cartilage. This kind of tissues present natural different properties from a biological and mechanical point of view. With the aim to imitating the natural gradient occurring in the bone-cartilage tissue, several technologies and methods have been proposed over recent years in order to develop polymeric functionally graded scaffolds (FGS). In this study three-layered scaffolds with a pore size gradient were developed by melt mixing polylactic acid (PLA) and two water-soluble porogen agents: sodium chloride (NaCl) and polyethylene glycol (PEG). Pore dimensions were controll…

Calcium phosphate/polyvinyl acetate coatings on SS304 via galvanic co-deposition for orthopedic implant applications

2021

Abstract In this work, the galvanic deposition method is used to deposit coatings of brushite/hydroxyapatite/polyvinyl acetate on 304 stainless steel. Coatings are obtained at different temperatures and with different sacrificial anodes, consisting of a mixture of brushite and hydroxyapatite. Samples are aged in a simulated body fluid (SBF), where a complete conversion of brushite into hydroxyapatite with a simultaneous change in morphology and wettability occurred. The corrosion tests show that, compared with bare 304, the coating shifts Ecorr to anodic values and reduces icorr Ecorr, and icorr has different values at different aging times due to chemical interactions at the solid/liquid i…

CaP-Bioglass composite coating by galvanic deposition

Orthopedic devices are increasingly used in our life to improve the health of patients after bone fractures due to accidents, aging, or sports injuries. Metallic materials (i.e. stainless steel, titanium alloys chromium alloys) are widely employed to fabricate prostheses, screws, and osteosynthesis plates. Although metals could be good mechanical properties like human bone, corrosion phenomena could occur, causing in the worst cases the failure of orthopedic implants. In addition, metal ions released around periprosthetic tissues could arise allergenic and cancerogenic effects. Nowadays, the research was focused on coating science to deal with these issues. In particular, the development of…

Solution-Based Processing for Scaffold Fabrication in Tissue Engineering Applications: A Brief Review

2021

The fabrication of 3D scaffolds is under wide investigation in tissue engineering (TE) because of its incessant development of new advanced technologies and the improvement of traditional processes. Currently, scientific and clinical research focuses on scaffold characterization to restore the function of missing or damaged tissues. A key for suitable scaffold production is the guarantee of an interconnected porous structure that allows the cells to grow as in native tissue. The fabrication techniques should meet the appropriate requirements, including feasible reproducibility and time- and cost-effective assets. This is necessary for easy processability, which is associated with the large …

Combining carvacrol and nisin in biodegradable films for antibacterial packaging applications

2021

Abstract In this work, the feasibility of antibacterial biopolymeric films containing carvacrol (CRV) and a nisin commercial formulation (Nis) for potential food packaging applications was investigated. As polymer matrix, a commercial biodegradable polymer formulation of Mater-Bi (MB) was chosen due to its significant food packaging applications. CRV and Nis were chosen due to their well-established antibacterial properties and their potential synergistic effect. MB/CRV, MB/Nis, and MB/CRV/Nis systems were produced by melt mixing and compression molding. The mechanical properties of the films were evaluated by tensile tests. Differential scanning calorimetry was assessed aiming at investiga…

Use of Biochar as Filler for Biocomposite Blown Films: Structure-Processing-Properties Relationships

2021

In this work, biocomposite blown films based on poly(butylene adipate-co-terephthalate) (PBAT) as biopolymeric matrix and biochar (BC) as filler were successfully fabricated. The materials were subjected to a film-blowing process after being compounded in a twin-screw extruder. The preliminary investigations conducted on melt-mixed PBAT/BC composites allowed PBAT/BC 5% and PBAT/BC 10% to be identified as the most appropriate formulations to be processed via film blowing. The blown films exhibited mechanical performances adequate for possible application as film for packaging, agricultural, and compost bags. The addition of BC led to an improvement of the elastic modulus, still maintaining h…

Effect of graphene and fabrication technique on the release kinetics of carvacrol from polylactic acid

2019

Abstract Porous membranes and thin films containing poly-lactic acid (PLA), carvacrol (CRV) and graphene nanoplatelets (GNP) were fabricated by electrospinning and solvent casting at different formulations. The systems were characterized from a mechanical, morphological, calorimetric and spectroscopic point of view. CRV release as a function of time was studied and a mathematical model was used to fit and interpret the data in order to investigate the release mechanism. The results indicate that the incorporation of GNP generally determined a simultaneous strengthening, stiffening and toughening effect, while preserving a good ductility. Furthermore, integrating GNP allowed tuning the amoun…

Integration of PCL and PLA in a monolithic porous scaffold for interface tissue engineering.

2016

A novel bi-layered multiphasic scaffold (BLS) have been fabricated for the first time by combining melt mixing, compression molding and particulate leaching. One layer has been composed by polylactic acid (PLA) presenting pore size in the range of 90-110µm while the other layer has been made of polycaprolactone (PCL) with pores ranging from 5 to 40µm. The different chemo-physical properties of the two biopolymers combined with the tunable pore architecture permitted to realize monolithic functionally graded scaffolds engineered to be potentially used for interface tissues regenerations. BLS have been characterized from a morphological and a mechanical point of view. In particular, mechanica…

Physical and biological properties of electrospun poly( d , l ‐lactide)/nanoclay and poly( d , l ‐lactide)/nanosilica nanofibrous scaffold for bone t…

2021

Electrospun scaffolds exhibiting high physical performances with the ability to support cell attachment and proliferation are attracting more and more scientific interest for tissue engineering applications. The inclusion of inorganic nanoparticles such as nanosilica and nanoclay into electrospun biopolymeric matrices can meet these challenging requirements. The silica and clay incorporation into polymeric nanofibers has been reported to enhance and improve the mechanical properties as well as the osteogenic properties of the scaffolds. In this work, for the first time, the physical and biological properties of polylactic acid (PLA) electrospun mats filled with different concentrations of n…

PANI-Based Wearable Electrochemical Sensor for pH Sweat Monitoring

2021

Nowadays, we are assisting in the exceptional growth in research relating to the development of wearable devices for sweat analysis. Sweat is a biofluid that contains useful health information and allows a non-invasive, continuous and comfortable collection. For this reason, it is an excellent biofluid for the detection of different analytes. In this work, electrochemical sensors based on polyaniline thin films deposited on the flexible substrate polyethylene terephthalate coated with indium tin oxide were studied. Polyaniline thin films were abstained by the potentiostatic deposition technique, applying a potential of +2 V vs. SCE for 90 s. To improve the sensor performance, the electronic…

Nanocarbons in electrospun polymeric nanomats for tissue engineering: A review

2017

Electrospinning is a versatile process technology, exploited for the production of fibers with varying diameters, ranging from nano- to micro-scale, particularly useful for a wide range of applications. Among these, tissue engineering is particularly relevant to this technology since electrospun fibers offer topological structure features similar to the native extracellular matrix, thus providing an excellent environment for the growth of cells and tissues. Recently, nanocarbons have been emerging as promising fillers for biopolymeric nanofibrous scaffolds. In fact, they offer interesting physicochemical properties due to their small size, large surface area, high electrical conductivity an…

Polycaprolactone-based scaffold for oil-selective sorption and improvement of bacteria activity for bioremediation of polluted water

2017

Abstract A novel floatable and biodegradable sponge for the selective absorption of oil from water and potentially useful as cell carrier for bioremediation treatments was prepared in polycaprolactone (PCL). The eco-friendly process for fabricating the PCL sponge does not involve either synthetic routes or organic solvents, thus minimizing environmental hazard. In particular, the 3D porous materials have been prepared by mixing in the melt the polymer matrix with two water-soluble porogen agents (NaCl and PEG) and thereafter leaching the obtained PCL/NaCl/PEG composites in water. The PCL sponges here proposed are capable to remove different types of oily pollutants (up to 500 wt%), and were…

Blue biotechnology: oil bioremediation using hydrocarbon-degrading bacteria immobilized on biodegradable membranes

2017

A novel bioremediation system to clean up oil contaminated water was developed combining hydrocarbon (HC) degrading bacteria immobilized and polylactic acid (PLA) or polycaprolactone (PCL) membranes prepared by electrospinning. The bioremediation efficiency was tested on crude oil using highly performant HC degrading bacterial strains isolated from marine and soil environments. The membrane morphology, the microbial adhesion and proliferation were evaluated using scanning electron microscopy (SEM). The SEM analysis highlighted that the fibers of the electrospun mats were in nanoscale with a similar diameter size distribution. The electrospun membranes exhibited high oil absorption capacity …

Bio-polymeric based sponges for oily waste recovery

2015

Over the last years, many efforts were dedicated to the development of sustainable sorbent materials. The interest concerns a wide range of applications. Oily products and utilization are increasing all over the world as far as the possibility of spill oily accidents. In this direction, production of sponges showing lipophilic properties allows for the proper disposal of oily waste and does not cause secondary pollution. In this work, it is proposed an eco-friendly technology to prepare a polycaprolactone (PCL) biodegradable sponge for the selective absorption of oil from water. PCL biopolymer matrix was melt mixed with water-soluble porogen agents and then leached in water to obtain a poro…

Melt Processed PCL/PEG Scaffold with Discrete Pore Size Gradient for Selective Cellular Infiltration

2016

In order to develop scaffold able to mimic the natural gradient properties of tissues, biphasic and triphasic approaches were adopted. In this work, polycaprolactone/polyethylene glycol (PCL/PEG) scaffolds were prepared by using a combination of melt mixing and selective leaching without harmful solvents. The method permitted to develop three-layer scaffolds with high control of porosity and pore size. The mechanical properties were evaluated under physiological condition in order to simulate the real conditions of work. Co-culture of osteoblastic and fibroblastic mice cells were carried out in order to study the differential cellular permeation through the different pore size layers.

Galvanic deposition of Chitosan-AgNPs as antibacterial coating

Thanks to mechanical properties similar human bones, metallic materials represent the best choice for fabrication of orthopedic implants. Although metals could be widely used in the field of biomedical implants, corrosion phenomena could occur, causing metal ions releasing around periprosthetic tissues leading, in the worst cases, to the development of infections. In these cases, patients need prolonged antibiotic therapies that may cause bacterial resistance. Preventing bacterial colonization of biomedical surfaces is the key to limiting the spread of infections. Antibacterial coatings have become a very active field of research, strongly stimulated by the increasing urgency of identifying…

Effect of Polyhydroxyalkanoate (PHA) Concentration on Polymeric Scaffolds Based on Blends of Poly-L-Lactic Acid (PLLA) and PHA Prepared via Thermally…

2022

Hybrid porous scaffolds composed of both natural and synthetic biopolymers have demonstrated significant improvements in the tissue engineering field. This study investigates for the first time the fabrication route and characterization of poly-L-lactic acid scaffolds blended with polyhydroxyalkanoate up to 30 wt%. The hybrid scaffolds were prepared by a thermally induced phase separation method starting from ternary solutions. The microstructure of the hybrid porous structures was analyzed by scanning electron microscopy and related to the blend composition. The porosity and the wettability of the scaffolds were evaluated through gravimetric and water contact angle measurements, respective…

Polysaccharide nanocrystals as fillers for PLA based nanocomposites

2016

The development of green nanocomposites based on biopolymers and bio-based nanofillers has attracted over the recent years the attention of academic and industrial research. Indeed, these nanocomposites could replace some oil-derived polymers and thus helping to overcome environmental problems. In this regard, PLA as matrix and polysaccharide nanocrystals as fillers are the most promising components to obtain high-performance green bio-nanocomposites suitable for different applications, particularly for packaging and biomedical applications. Indeed, at present, due to its processability, mechanical and biological properties, as well as its commercial availability, poly(lactic acid) (PLA) po…

Poly-l-Lactic Acid (PLLA)-Based Biomaterials for Regenerative Medicine: A Review on Processing and Applications

2022

Synthetic biopolymers are effective cues to replace damaged tissue in the tissue engineering (TE) field, both for in vitro and in vivo application. Among them, poly-l-lactic acid (PLLA) has been highlighted as a biomaterial with tunable mechanical properties and biodegradability that allows for the fabrication of porous scaffolds with different micro/nanostructures via various approaches. In this review, we discuss the structure of PLLA, its main properties, and the most recent advances in overcoming its hydrophobic, synthetic nature, which limits biological signaling and protein absorption. With this aim, PLLA-based scaffolds can be exposed to surface modification or combined with other bi…

Blue biotechnology: enhancement of bioremediation using bacterial biofilms on biodegradable scaffolds

2016

Petroleum hydrocarbons are still the most threatening environmental pollutants. A promising non invasive and low-cost technology for the treatment of contaminated sites is based on bioremediation by biodegrading microorganism endowed with catabolic ability towards oil and derivatives. New methods are needed to enhance and optimize natural biodegradation, such as the immobilization of hydrocarbons degraders in many types of supports. We developed a scaffold-bacteria bioremediation system to clean up oil contamination based on degradable 3D scaffolds. The polycaprolactone component is biodegradable, produced in the melt, i.e. at low cost and without the use of toxic solvents. The biofilm is m…

In vitro Antifungal Activity of Biopolymeric Foam Activated with Carvacrol

2020

Background: Active packaging represents a defining strategy to improve food quality and safety of the packaged foods. This study aimed to evaluate the in vitro ability of commercial biopolymeric foams, namely Mater-Bi (MB), activated with 20% of carvacrol, to develop a completely biodegradable and compostable packaging to inhibit the growth of spoilage and pathogenic yeasts.
 Methods: MB foams, with and without carvacrol, were produced by melt mixing and the foaming process was performed in a laboratory press. The antifungal activity of foams containing carvacrol was tested applying the disk diffusion method. Statistical analysis was done using XLStat software version 7.5.2 for Excel.&…

Scaffold con gradiente della dimensione dei pori per la migrazione selettiva di cellule eterotipiche

2014

Behavior of Calcium Phosphate–Chitosan–Collagen Composite Coating on AISI 304 for Orthopedic Applications

2022

Calcium phosphate/chitosan/collagen composite coating on AISI 304 stainless steel was investigated. Coatings were realized by galvanic coupling that occurs without an external power supply because it begins with the coupling between two metals with different standard electrochemical potentials. The process consists of the co-deposition of the three components with the calcium phosphate crystals incorporated into the polymeric composite of chitosan and collagen. Physical-chemical characterizations of the samples were executed to evaluate morphology and chemical composition. Morphological analyses have shown that the surface of the stainless steel is covered by the deposit, which has a very r…

Antibacterial biopolymeric foams: Structure–property relationship and carvacrol release kinetics

2019

Abstract In this work, the feasibility of antibacterial biopolymeric foams containing carvacrol (CRV) for potential food packaging applications was investigated. Sodium bicarbonate (SB) was chosen as foaming agent and a commercial biodegradable polymer, Mater-Bi® (MB), as a matrix. MB/SB and MB/SB/CRV systems were prepared by melt mixing and the foaming process was conducted in a laboratory press. The influence of foaming agent and antibacterial additive content was investigated. The foamed samples were characterized through morphological analysis, mechanical tests and measurements of CRV release kinetics. Moreover, a mathematical model, i.e. power law model, was used to fit the release dat…

Occurrence of Microplastics in Waste Sludge of Wastewater Treatment Plants: Comparison between Membrane Bioreactor (MBR) and Conventional Activated S…

2022

In this study, the presence of microplastics in the sludge of three wastewater treatment plants (WWTPs) was examined. The investigated WWTPs operated based on a conventional activated sludge (CAS) process, with (W1) or without (W2) primary clarification, and a membrane bioreactor process (MBR) (W3). The microplastics (MPs) concentration in the samples of W3 was approximately 81.1 ± 4.2 × 103 particles/kg dry sludge, whereas MPs concentrations in W1 and W2 were 46.0 ± 14.8 × 103 particles/kg dry sludge and 36.0 ± 5.2 × 103 particles/kg dry sludge, respectively. Moreover, MPs mainly consisted of fragments (66–68%) in the CAS plants, whereas the fra…

Actinorhodin production intensification by nanofibrous membranes in Streptomyces coelicolor cultures

2016

In this work, electrospun polycaprolactone (PCL) and polylactic acid (PLA) membranes, subjected or not to O2-plasma treatment, werwe used as support for cell-immobilization in S. coelicolor immobilized-cells created a compact biofilm on both kinds of membranes.

Mechanical behavior of polylactic acid/polycaprolactone porous layered functional composites

2016

Abstract Biopolymeric porous devices exhibiting graded properties can play a crucial role in several fields, such as tissue engineering or controlled drugs release. In this context, the gradient of a specific property can be achieved by developing porous laminates composed by different types of materials. This work presents for the first time a multi-phasic porous laminate based on polycaprolactone (PCL) and polylactic acid (PLA) prepared by combining melt mixing, compression molding and particle leaching. All the materials were characterized from a morphological and a mechanical point of view. The results put into evidence the possibility to tune and to predict the mechanical properties by…

Rapid and eco-friendly synthesis of graphene oxide-silica nanohybrids

2014

Physical properties of green composites based on poly-lactic acid or Mater-Bi® filled with Posidonia Oceanica leaves

2018

Abstract This work focuses on the evaluation of Posidonia Oceanica leaves as effective reinforcing agent for ecofriendly, fully biodegradable polymer composites. Posidonia leaves were washed, ground and sieved in order to achieve two different size distributions and aspect ratios. They were then added to either a stiff or a ductile biodegradable polymer matrix, respectively poly-lactic acid (PLA) and MaterBi® (MB), at two different filler contents (10 wt% and 20 wt%). The materials were fully characterized from a spectroscopic, morphological, rheological, and mechanical point of view. In particular, the outcomes of tensile tests were statistically analyzed by using a Full Factorial Design i…

Antimicrobial additives for poly(lactic acid) materials and their applications: current state and perspectives

2018

Poly(lactic acid)-based antimicrobial materials received considerable attention as promising systems to control microbial growth. The remarkable physicochemical properties of PLA such as renewability, biodegradability, and US Food and Drug Administration (FDA) approval for clinical use open up interesting perspectives for application in food packaging and biomedical materials. Nowadays, there is an increasing consumer demands for fresh, high-quality, and natural foods packaged with environmentally friendly materials that prolong the shelf life. The incorporation of antimicrobial agents into PLA-based polymers is likely to lead to the next generation of packaging materials. The development o…

Preparation, characterization and hydrolytic degradation of PLA/PCL co-mingled nanofibrous mats prepared via dual-jet electrospinning

2017

Abstract PLA/PCL co-mingled nanofibrous mats were prepared via multi-jet electrospinning. The concentration of PLA and PCL in the co-mingled mats were controlled by changing the flow rate of the two polymer solutions. The amount of PLA and PCL in the co-mingled nanofibrous mats was monitored by UV–Vis measurements through a colored dye added to PLA and by FTIR-ATR analysis. Morphology and mechanical properties of the nanofibrous mats were respectively examined by scanning electron microscopy (SEM) and tensile tests. Water contact angles measurements were also carried out in order to investigate the wettability of the materials. Finally, the hydrolytic degradation of the mats in buffer solut…

Melt development of biphasic functionally graded scaffold

2016

Interface tissue engineering requires scaffolds that temporary replace the mechanical function of transition regions between two adjacent tissues. The presence of multi-phasic bio-structures that gradually change are typical features of interface tissues such as ligament-to-bone, tendon-to-bone and cartilage-to-bone. In this work, bi-layered scaffolds (BLS) composed by PLA with pores in the range of 90-110 µm and PCL with pores ranging from 5 to 40 µm were prepared by combining melt mixing, compression molding and particulate leaching. The principal advantages of this method lay in the absence of organic solvent during the preparation and in the easy control and high predictability of poros…

Properties-morphology relationships in electrospun mats based on polylactic acid and graphene nanoplatelets

2018

Abstract Aligned and randomly oriented polylactic acid (PLA) biocomposite nanofiber mats filled with Graphene nanoplatelets (GnP) were prepared by electrospinning. The morphological analysis revealed the successful alignment of the fibers achieved by collecting the mats on a high-speed rotary drum. Furthermore, GnP addition on the polymeric solution leads to an increase of the viscosity with a consequent increment of the fiber diameter. Tensile tests demonstrated that the reinforcing effect of GnP when added to the PLA matrix was more than three times higher in the aligned systems if compared with the respective randomly oriented mats. DSC analysis showed that GnPs were able to slightly inc…

Core-shell PLA/Kef hybrid scaffolds for skin tissue engineering applications prepared by direct kefiran coating on PLA electrospun fibers optimized v…

2021

Abstract Over the recent years, there is a growing interest in electrospun hybrid scaffolds composed of synthetic and natural polymers that can support cell attachment and proliferation. In this work, the physical and biological properties of polylactic acid (PLA) electrospun mats coated with kefiran (Kef) were evaluated. Gravimetric, spectroscopic (FTIR-ATR) and morphological investigations via scanning electron microscopy confirmed the effective formation of a thin kefiran layer wrapped on the PLA fibers with an easy-tunable thickness. Air plasma pre-treatment carried out on PLA (P-PLA) affected both the morphology and the crystallinity of Kef coating as confirmed by differential scanning…

A facile method to determine pore size distribution in porous scaffold by using image processing

2015

Abstract Image processing permits scientists to investigate morphological properties of three-dimensional structures starting from their bi-dimensional gray-scale representation. In many cases porous structure with complex architecture has to be designed in order to attempt specific properties such in the case of scaffold for tissue engineering. Traditional morphological characterization, like scanning electron microscopy, should be coupled with quantitative information such as pore size distribution (PSD) in order to get a deeper understanding of the influence of the porous structure on tissue regeneration processes and on other related applications, it is remarkable to study a quantitativ…

PBAT Based Composites Reinforced with Microcrystalline Cellulose Obtained from Softwood Almond Shells

2021

This study explores the processability, mechanical, and thermal properties of biocompostable composites based on poly (butylene adipate-co-terephthalate) (PBAT) as polymer matrix and microcrystalline cellulose (MCC) derived from softwood almond (Prunus dulcis) shells (as-MCC) as filler at two different weight concentration, i.e., 10 wt% and 20 wt%. The materials were processed by melt mixing and a commercial MCC (c-MCC) was used as filler comparison. The fibrillar shape of as-MCC particles was found to change the rheological behavior of PBAT, particularly at the highest concentration. The melt mixing processing allowed obtaining a uniform dispersion of both kinds of fillers, slightly reduci…

Preparation and mechanical characterization of polycaprolactone/graphene oxide biocomposite nanofibers

2016

Biocomposite nanofiber scaffolds of polycaprolactone (PCL) filled with graphene oxide (GO) were prepared using electrospinning technology. Morphological and mechanical properties of the scaffolds were characterized in dry and wet environment. The results showed that the successful incorporation of GO nanosheets into PCL polymer nanofibers improved their mechanical properties. Furthermore it was demonstrated the higher performance achieved when GO is filled at low concentration in the nanofibers.

Electrospun PCL/GO-g-PEG structures: Processing-morphology-properties relationships

2017

Abstract Polycaprolactone (PCL) biocomposite nanofiber scaffolds with different concentrations of graphene oxide (GO) and GO surface grafted with poly(ethylene glycol) (GO-g-PEG) were prepared by electrospinning. Morphological, mechanical as well as wettability characterizations of electrospun nanofibers were carried out. Results showed that the average diameter of PLA/GO electrospun nanofibers decreased upon increasing the filler content. Differently, the diameter increased while using GO-g-PEG. Both nanofillers enhanced the electrospun PCL hydrophilicity even if PCL/GO-g-PEG samples exhibited improved wettability. The Young moduli of the composite nanofiber mats were improved by adding GO…

Integrated production of biopolymers with industrial wastewater treatment: Effects of OLR on process yields, biopolymers characteristics and mixed mi…

2022

The production of polyhydroxyalkanoates (PHA) using industrial wastewaters as feedstocks is a current and challenging topic. This study investigated the production of biopolymers by a mixed microbial culture under different OLRs equal to 1 kgCOD m-3d-1 (Period 1), 2 kgCOD m-3d-1 (Period 2) and 3 kgCOD m-3d-1 (Period 3). The maximum PHA content was achieved in Period 2 (0.38 gPHA gTSS-1), whereas lower values were obtained in Period 1 (0.13 gPHA gTSS-1) and Period 3 (0.26 gPHA gTSS-1). Overall, the maximum PHA productivity resulted equal to 0.08 gPHA L-1h-1 (P2), 0.05 gPHA L-1h-1 (P1) and 0.04 gPHA L-1h-1 (P3), respectively. The molecular weight of the PHA increased from Period 1 (250 kDa) t…

Using Taguchi method for the optimization of processing variables to prepare porous scaffolds by combined melt mixing/particulate leaching

2017

Synthetic biopolymers have made significant inroads into the development of devices for tissue regeneration. In this context, a challenge is the achievement of appropriate properties mimicking the natural extracellular matrix by fabricating scaffolds presenting mechanical properties, specific surface, porosity and pore interconnection adequate for the final application. This study involved a systematic procedure based on Taguchi method for parameters optimization of melt mixing/particulate leaching combined processes aiming to enhance the performance of the scaffolds. In particular, it was evaluated the effect of time and temperature of melt mixing of the poly(lactic acid) matrix with two w…

Physical and antibacterial properties of PLA electrospun mats loaded with carvacrol and nisin

2022

Functional, biopolymeric electrospun structures for the controlled release of antimicrobial agents are gaining in-creasing interest in food packaging applications. In this study, the physical and antibacterial performances of ternary systems composed of polylactic acid (PLA) electrospun mats loaded with 20 wt% of different relative amounts of carvacrol (CRV) and a commercial nisin formulation (Nis) were assessed. Scanning electron micrographs displayed micro-scaled fibers with different diameter size distributions depending on the relative concentrations of the additives. The PLA/CRV/Nis membranes??? wettability was affected by the relative amount of CRV and Nis loaded, switching from hydro…

Implication of the biofilm ageing for the settlement of the vermetid gastropod Dendropoma cristatum (Biondi 1857)

2016

Dendropoma cristatumreefs are key-intertidal habitats of the central Mediterranean. Knowledge onD. cristatumbiology is presently scant, particularly on its early life stage. The development of embryos occurs inside the maternal shell, and the crawling larvae settle on hard substrates shortly after hatching. Epilithic biofilm is known to have implications in the settlement of many marine invertebrates; however whether biofilm plays a role in driving the vermetid settlement is unknown. In this study the microbial assemblage ageing is tested as apotentialtriggerforD. cristatumsettlement. A field experiment was set-up to compare the larval settlement rate on removable limestone cubes (5x5x2 cm)…

Effect of PCL/PEG-Based Membranes on Actinorhodin Production in Streptomyces coelicolor Cultivations

2015

The actinomycetes, Gram-positive filamentous bacteria, are the most prolific source of natural occurring antibiotics. At an industrial level, antibiotics from actinomycete strains are produced by means of submerged fermentations, where one of the major factors negatively affecting bioproductivity is the pellet-shaped biomass growth. The immobilization of microorganisms on properly chosen supports prevents cell-cell aggregation resulting in improving the biosynthetic capability. Thus, novel porous biopolymer-based devices are developed by combining melt mixing and particulate leaching. In particular, polycaprolactone (PCL), polyethylene glycol (PEG), and sodium chloride (NaCl) with different…

Flexible mats as promising antimicrobial systems via integration of Thymus capitatus (L.) essential oil into PLA

2020

Aim: To develop electrospun mats loaded with Thymus capitatus (L.) essential oil ( ThymEO) and to study their morpho-mechanical and antimicrobial properties. Materials & methods: Poly(lactic acid) (PLA) mats containing ThymEO were prepared by electrospinning. The effect of ThymEO on the morpho-mechanical properties of fibers was assayed by scanning electron microscopy and dynamometer measurements. The antimicrobial activity of ThymEO delivered either in liquid or vapor phase was assessed through killing curves and invert Petri dishes method. The cytotoxicity was also investigated. Results: The mechanical properties were enhanced by integrating ThymEO into PLA. Both liquid and vapors of…

Synthesis and self-assembly of a PEGylated-graphene aerogel

2016

Abstract In the frame of this work, we present, for the first time, the synthesis and self-assembly of an aerogel built by graphene oxide-polyethylene glycol. The synthetic route involves at first the coupling of GO with an amino-terminated polyethylene glycol sample by carbodiimide in aqueous environment, and the subsequent conversion of the hydrogel achieved into an aerogel via freeze-drying. The 3D PEGylated graphene-based aerogel, characterized by spectroscopic, morphological, structural and mechanical analyses, displays an ultralight and highly porous (99.7%) network and possesses high mechanical properties together with a good biocompatibility.

Green Nanocomposites-Based on PLA and Natural Organic Fillers

2017

Over the past decades, many efforts have been carried out for the development of novel green nanocomposites based on biopolymers and natural organic nanofillers. Indeed, these nanocomposites could replace some oil-derived polymers and thus helping to overcome environmental problems. In this regard, poly (lactic acid) (PLA) as matrix and polysaccharide nanocrystals (cellulose, chitin, and starch) as bio-based nanoreinforcements are the most promising components to obtain high-performance green nanocomposites. This chapter covers the basic features of PLA and polysaccharide nanocrystals derived from biomass-based raw materials such as cellulose, chitin, and starch. In particular, this chapter…

Plasma modified PLA electrospun membranes for actinorhodin production intensification in Streptomyces coelicolor immobilized-cell cultivations

2017

Most of industrially relevant bioproducts are produced by submerged cultivations of actinomycetes. The immobilization of these Gram-positive filamentous bacteria on suitable porous supports may prevent mycelial cell-cell aggregation and pellet formation which usually negatively affect actinomycete submerged cultivations, thus, resulting in an improved biosynthetic capability. In this work, electrospun polylactic acid (PLA) membranes, subjected or not to O2-plasma treatment (PLA-plasma), were used as support for immobilized-cell submerged cultivations of Streptomyces coelicolor M145. This strain produces different bioactive compounds, including the blue-pigmented actinorhodin (ACT) and red-p…

Biocomposite PBAT/lignin blown films with enhanced photo-stability.

2022

Lignin can be obtained as a byproduct during cellulose-rich pulp fibers production and it is habitually treated as waste or intended for low-value destinations. However, due to UV absorption and mechanical properties, lignin can contribute to the fabrication of biodegradable blown films with superior performances. In this study, it was established the suitability of lignin for manufacturing biocomposite PBAT blown films with higher stiffness and photo-oxidation resistance. The effect of the filler concentration on the melt rheological behavior in non-isothermal elongational flow was investigated. The results allowed us to choose the correct filler concentration for producing films through a…

PLA based biocomposites reinforced with Posidonia oceanica leaves

2018

Abstract Biocomposites can valorize some natural products related to natural processes or crop and waste industries. In this work, leaves of Posidonia oceanica (PO), dominant sea grass in the Mediterranean Sea, were used to prepare PLA based biocomposites. Materials were prepared by melt mixing PLA with PO as filler. The morphology as well as the mechanical and thermal properties of PLA/PO composites were evaluated and related with the influence of the content and size of PO. Moreover, the experimental elastic moduli of the biocomposites was modelled employing the Halpin–Tsai (HT) model. Furthermore, in order to take into consideration the high porosity of PO leaves, the HT parameters relat…

Preparation and characterization of multilayer porous PLA scaffolds

2013

Engineered membranes for residual cell trapping on microfluidic blood plasma separation systems. A comparison between porous and nanofibrous membranes

2020

AbstractBlood-based clinical diagnostics require challenging limit-of-detection for low abundance, circulating molecules in plasma. Micro-scale blood plasma separation (BPS) has achieved remarkable results in terms of plasma yield or purity, but rarely achieving both at the same time. Here, we proposed the first use of electrospun polylactic-acid (PLA) membranes as filters to remove residual cell population from continuous hydrodynamic-BPS devices. The membranes hydrophilicity was improved by adopting a wet chemistry approach via surface aminolysis as demonstrated through Fourier Transform Infrared Spectroscopy and Water Contact Angle analysis. The usability of PLA-membranes was assessed th…

Carvacrol activated biopolymeric foam: An effective packaging system to control the development of spoilage and pathogenic bacteria on sliced pumpkin…

2021

Abstract A commercial biodegradable starch-based polymer (Mater-Bi) was activated with carvacrol to develop a biodegradable and compostable polymer to be used in food packaging. Based on previous tests, carvacrol was added at 20 % weight of foam. MB foams, with and without carvacrol, were tested for their morphological characteristics, mechanical tests and kinetics of carvacrol release under refrigerated storage conditions. Carvacrol slightly increased the porosity of the foams, induced a reduction of the compressive elastic modulus (Ecom) of foamed MB from 6 to ∼ 3.4 MPa and a decrease of the tensile elastic modulus from ∼70 MPa to ∼16.5 MPa. Carvacrol release from the foam at 4 °C was alm…

A facile and eco-friendly route to fabricate poly(Lactic acid) scaffolds with graded pore size

2016

Over the recent years, functionally graded scaffolds (FGS) gaineda crucial role for manufacturing of devices for tissue engineering. The importance of this new field of biomaterials research is due to the necessity to develop implants capable of mimicking the complex functionality of the various tissues, including a continuous change from one structure or composition to another. In this latter context, one topic of main interest concerns the design of appropriate scaffolds for bone-cartilage interface tissue. In this study, three-layered scaffolds with graded pore size were achieved by melt mixing poly(lactic acid) (PLA), sodium chloride (NaCl) and polyethylene glycol (PEG). Pore size distr…

Structure–property relationship and controlled drug release from multiphasic electrospun carvacrol-embedded polylactic acid/polyethylene glycol and p…

2018

Electrospinning technologies gained considerable interest over the last decade. In this study, it is proposed a systematic study of polylactic acid/polyethylene glycol (PLA/PEG) and polylactic acid/polyethylene oxide (PLA/PEO) electrospun blends at different concentrations. The effect of blend composition and PEG molecular weight on the morphological and mechanical properties of the mats was evaluated. Furthermore, the kinetic release of carvacrol as model drug in phosphate buffer saline at 37℃ was studied and the data were then fitted using an exponential model. The scanning electron microscopy revealed that the morphology of the mats was strongly dependent on the relative ratio PLA:PEG, …

Innovative, ecofriendly biosorbent-biodegrading biofilms for bioremediation of oil- contaminated water.

2019

Immobilization of microorganisms capable of degrading specific contaminants significantly promotes bioremediation processes. In this study, innovative and ecofriendly biosorbent-biodegrading biofilms have been developed in order to remediate oil-contaminated water. This was achieved by immobilizing hydrocarbon-degrading gammaproteobacteria and actinobacteria on biodegradable oil-adsorbing carriers, based on polylactic acid and polycaprolactone electrospun membranes. High capacities for adhesion and proliferation of bacterial cells were observed by scanning electron microscopy. The bioremediation efficiency of the systems, tested on crude oil and quantified by gas chromatography, showed that…

A new scaffold-bacteria-based system for bioremediation of oil contaminated water

2015

Bioremediation is a promising non-invasive and cost-effective technology that uses (micro)organisms to degrade or remove hazardous environmental pollutants. New methods are needed to enhance and optimize natural biodegradation, such as the use of carrier materials that could improve survival and catalytic activity of the biodegraders. In this study, we developed a bioremediation system based on a new 3D polycaprolactone-based scaffold and hydrocarbon(HC)-degrading bacteria to clean (sea)water contaminated by crude oil and its derivatives. Scaffold biopolymers are biodegradable, produced in the melt, i.e. at low cost and without the use of toxic solvents. They can be available in large quant…

Processing, structure, property relationships and release kinetics of electrospun PLA/Carvacrol membranes

2018

Abstract In this work, polylactic acid (PLA) membranes at two different carvacrol (CRV) nominal concentration (i.e. 14 wt% and 28 wt%) were prepared via electrospinning technology. The membranes were characterized by scanning electron microscopy, ATR-FTIR and calorimetric measurements as well as tensile tests. Moreover, the release kinetics of CRV in phosphate buffered solution at 37 °C was monitored through UV–Vis measurements and the data were fitted with a power law model. Results indicated that the successful incorporation of CRV in the polymer matrix damaged the fibers morphology but increased all the mechanical parameters investigated (i.e. elastic modulus, tensile strength and elonga…

Galvanic Deposition of Calcium Phosphate/Bioglass Composite Coating on AISI 316L

2023

Calcium phosphate/Bioglass composite coatings on AISI 316L were investigated with regard to their potential role as a beneficial coating for orthopedic implants. These coatings were realized by the galvanic co-deposition of calcium phosphate compounds and Bioglass particles. A different amount of Bioglass 45S5 was used to study its effect on the performance of the composite coatings. The morphology and chemical composition of the coatings were investigated before and after their aging in simulated body fluid. The coatings uniformly covered the AISI 316L substrate and consisted of a brushite and hydroxyapatite mixture. Both phases were detected using X-ray diffraction and Raman spectroscopy.…

Development of polymeric functionally graded scaffolds: a brief review.

2016

Over recent years, there has been a growing interest in multilayer scaffolds fabrication approaches. In fact, functionally graded scaffolds (FGSs) provide biological and mechanical functions potentially similar to those of native tissues. Based on the final application of the scaffold, there are different properties (physical, mechanical, biochemical, etc.) which need to gradually change in space. Therefore, a number of different technologies have been investigated, and often combined, to customize each region of the scaffolds as much as possible, aiming at achieving the best regenerative performance. In general, FGSs can be categorized as bilayered or multilayered, depending on the number…

Preparation and characterization of PCL/GO-g-PEG biocomposite nanofiber scaffolds

2016

Biocomposite nanofiber scaffolds of polycaprolactone (PCL) with different graphene oxide surface grafted with poly(ethylene glycol) (GO-g-PEG) concentrations were prepared by electrospinning. Morphological, mechanical as well as wettability characterization were carried out. Results showed that the average diameter of PLA/GO-g-PEG electrospun nanofibers increased by increasing the filler content. GO-g-PEG enhanced the electrospun PCL hydrophilicity as well as the Young modulus, in particular at low GO-g-PEG concentrations.

Synthesis and characterization of PEGylated graphene oxide for sorafenib modified release

2015

Concept Graphene, a single layer of sp2-hybridized carbon atoms arranged in a honeycomb two-dimensional (2-D) crystal lattice, has evoked enormous interest throughout the scientific community since its first appearance in 2004. Due to its unique structure and geometry, graphene possesses remarkable physical-chemical properties (including large specific surface area and biocompatibility) that enable it to be an ideal material for several applications, ranging from quantum physics, nanoelectronics, energy research, catalysis and engineering of nanocomposites and biomaterials. In the area of nanomedicine, graphene and its derivatives can be exploited for a broad range of applications, includin…

Green and Integrated Wearable Electrochemical Sensor for Chloride Detection in Sweat

2022

Wearable sensors for sweat biomarkers can provide facile analyte capability and monitoring for several diseases. In this work, a green wearable sensor for sweat absorption and chloride sensing is presented. In order to produce a sustainable device, polylactic acid (PLA) was used for both the substrate and the sweat absorption pad fabrication. The sensor material for chloride detection consisted of silver-based reference, working, and counter electrodes obtained from upcycled compact discs. The PLA substrates were prepared by thermal bonding of PLA sheets obtained via a flat die extruder, prototyped in single functional layers via CO2 laser cutting, and bonded via hot-press. The effect of co…

Wearable sensor for real-time monitoring of oxidative stress

Pore size graded scaffold for selective cellular permeation

2014

Wearable sensor for real-time monitoring of hydrogen peroxide in simulated breath

Polycaprolactone-based scaffold for oil-selective sorption and improvement of bacteria activity for bioremediation of polluted water: Porous PCL syst…

2017

A novel floatable and biodegradable sponge for the selective absorption of oil from water and potentially useful as cell carrier for bioremediation treatments was prepared in polycaprolactone (PCL). The eco-friendly process for fabricating the PCL sponge does not involve either synthetic routes or organic solvents, thus minimizing environmental hazard. In particular, the 3D porous materials have been prepared by mixing in the melt the polymer matrix with two water-soluble porogen agents (NaCl and PEG) and thereafter leaching the obtained PCL/NaCl/PEG composites in water. The PCL sponges here proposed are capable to remove different types of oily pollutants (up to 500 wt%), and were successf…

Efficacy of poly(lactic acid)/carvacrol electrospun membranes against Staphylococcus aureus and Candida albicans in single and mixed cultures

2018

Carvacrol (CAR) is one of the most promising essential oil components with antimicrobial activity. New technologies aimed to incorporate this active molecule into carrier matrix to improve the stability and prolong the biological activity. The goal of this study was to investigate the feasibility of incorporating CAR into electrospun membranes of poly(lactic acid) (PLA) for potential applications as active antimicrobial system. To this end, PLA membranes containing homogeneously dispersed CAR were successfully prepared and a series of systematic tests including morpho-mechanical properties, in vitro release rate, and antimicrobial/antibiofilm activities against Staphylococcus aureus and Can…

Effect of hydroxyapatite concentration and size on morpho-mechanical properties of PLA-based randomly oriented and aligned electrospun nanofibrous ma…

2019

The growing demand for nanofibrous biocomposites able to provide peculiar properties requires systematic investigations of processing-structure-property relationships. Understanding the morpho-mechanical properties of an electrospun scaffold as a function of the filler features and mat microstructure can aid in designing these systems. In this work, the reinforcing effect of micrometric and nanometric hydroxyapatite particles in polylactic acid-based electrospun scaffold presenting random and aligned fibers orientation, was evaluated. The particles incorporation was investigated trough Fourier transform infrared spectroscopy in attenuated total reflectance. The morphology of the nanofibers …

Synthesis of a biocompatible aerogel based on graphene oxide and a modified polyethylene glycol

2016

The synthesis and self-assembly of a 3D aerogel built by graphene oxide (GO) and a modified polyethylene glycol (PEG) was achieved by a multi-step synthetic procedure, involving the preparation of an amino-terminated PEG (PEG-NH2) and the subsequent coupling with GO by carbodiimide in water, exploiting the carboxyl and epoxy moieties of GO and –NH2 terminations of the biopolymer. The resulting nanohybrid hydrogel was successively converted into an aerogel via dialysis plus freeze-drying [1] and fully characterized. FTIR, Raman, XPS, XRD and BET measurements were performed to confirm the successful modification for each reaction step, while morphological, mechanical and hemolytic tests were …