Search results for "GALLIUM NITRIDE"
showing 10 items of 38 documents
Indium surfactant effect on AlN/GaN heterostructures grown by metal-organic vapor-phase epitaxy: Applications to intersubband transitions
2006
We report on a dramatic improvement of the optical and structural properties of AlN/GaN multiple quantum wells (MQWs) grown by metal-organic vapor-phase epitaxy using indium as a surfactant. This improvement is observed using photoluminescence as well as x-ray diffraction. Atomic force microscopy shows different surface morphologies between samples grown with and without In. This is ascribed to a modified relaxation mechanism induced by different surface kinetics. These improved MQWs exhibit intersubband absorption at short wavelength (2 mu m). The absorption linewidth is as low as 65 meV and the absorption coefficient is increased by 85%.
Mid-infrared intersubband absorption in lattice-matched AlInN/GaN multiple-quantum wells
2005
We report the observation of midinfrared intersubband (ISB) absorption in nearly lattice-matched AlInNGaN multiple-quantum-wells. A clear absorption peak is observed around 3 μm involving transitions from the conduction band ground state to the first excited state. In addition to ISB absorption, photoluminescence experiments were carried out on lattice- matched AlInNGaN single quantum wells in order to determine the spontaneous polarization discontinuity between GaN and Al0.82 In0.18 N compounds. The experimental value is in good agreement with theoretical predictions. Our results demonstrate that the AlInNGaN system is very promising to achieve crack-free and low dislocation density struct…
Solar blind AlGaN photodetectors with a very high spectral selectivity
2006
Solar blind detectors based on AlGaN heterostructures grown on sapphire by Molecular Beam Epitaxy and with a dielectric interference filter deposited on the back side are demonstrated to provide record spectral selectivity. Rejection ratios of 2 x 10(4), and better than 5 x 10(4), measured between 280 and 320 nm, are achieved in Metal Semiconductor Metal detectors and Schottky diodes respectively. The whole detector process is fully compatible with low cost array fabrication.
Two-dimensional hydrogenated buckled gallium arsenide: an ab initio study
2020
First-principles calculations have been carried out to investigate the stability, structural and electronic properties of two-dimensional (2D) hydrogenated GaAs with three possible geometries: chair, zigzag-line and boat configurations. The effect of van der Waals interactions on 2D H-GaAs systems has also been studied. These configurations were found to be energetic and dynamic stable, as well as having a semiconducting character. Although 2D GaAs adsorbed with H tends to form a zigzag-line configuration, the energy differences between chair, zigzag-line and boat are very small which implies the metastability of the system. Chair and boat configurations display a [Formula: see text]-[Formu…
Cathodoluminescence and structural studies of nitrided 3D gallium structures grown by MOCVD
2009
Abstract Cathodoluminescence (CL) spectrum imaging and grazing incidence X-ray diffraction (GIXRD) are employed to investigate nitride three-dimensional (3D) gallium structures. The metallic precursors are naturally obtained on a large variety of substrates by metal-organic chemical vapor deposition (CVD) with different shape/size controlled by the growth conditions, especially the temperature. These 3D metallic structures are subsequently exposed to a nitridation process in a conventional CVD reactor to form GaN nanocrystals, as confirmed by GIXRD measurements. CL spectroscopy shows visible light emission (2.5–2.8 eV) excited from the GaN in the 3D structures.
Effects of the Buffer Layers on the Performances of (Al,Ga)N Ultraviolet Photodetectors
2004
The fabrication of (Al,Ga)N-based metal–semiconductor–metal (MSM) photovoltaic detectors requires the growth of high-quality (Al,Ga)N films. Inserting a low-temperature deposited buffer layer enables the growth of an epitaxial layer with a reduced density of defects. Two structures using GaN and AlN buffer layers have been deposited by low-pressure metalorganic chemical vapor deposition and used to fabricate MSM interdigitated detectors. The devices have been characterized to investigate the effects of the buffer layers on the detector performances.
Well-aligned hydrothermally synthesized zinc oxide nanorods on p-GaN without a seed layer
2015
Zinc oxide nanorods have great potential for the realization of high efficiency heterostructure LEDs based on pdoped gallium nitride. In order to obtain a good confinement of the light, a well-aligned nanorod waveguiding structure is desirable. This paper reports on the fabrication of vertical zinc oxide nanorods using a solution-based growth process that does not require a seed layer. The nanorods obtained follow the crystalline growth direction of the GaN layer along the c-axis. Various results with different reagent concentrations are reported.
Dopant radial inhomogeneity in Mg-doped GaN nanowires
2018
International audience; Using atom probe tomography, it is demonstrated that Mg doping of GaN nanowires grown by Molecular Beam Epitaxy results in a marked radial inhomogeneity, namely a higher Mg content in the periphery of the nanowires. This spatial inhomogeneity is attributed to a preferential incorporation of Mg through the m-plane sidewalls of nanowires and is related to the formation of a Mg-rich surface which is stabilized by hydrogen. This is further supported by Raman spectroscopy experiments which give evidence of Mg-H complexes in the doped nanowires. A Mg doping mechanism such as this, specific to nanowires, may lead to higher levels of Mg doping than in layers, boosting the po…
Gallium nitride thin films as processed by several techniques: Their possible applications for PV-devices
2011
We present in this work the characterization studies carried on GaN — thin films as processed by the Close Spaced Vapor Technique (CSVT), Laser Ablation (LA), and Molecular Beam Epitaxy (MBE), under particular growth parameters for each of the three techniques. The films characterization was performed by x-ray diffraction (X-RD), Photoluminescence (PL), Raman spectroscopy, optical transmission, energy dispersive spectroscopy (EDS), scanning electron microscopy (SEM) and high resolution transmission electron microscopy (HRTEM). With these results an analysis of the samples was done, with an aim for a possible application of these thin films for PV-devices.
Structural and Electrical Transport Properties of Si doped GaN nanowires
2016
The control and assessment of doping in GaN nanostructures are crucial for the realization of GaN based nanodevices. In this study, we have investigated a series of Si-doped GaN nanowires (NWs) grown by molecular beam epitaxy (MBE) with a typical dimension of 2–3 µm in length, and 20–200 nm in radius. In particular, high resolution energy dispersive X-ray spectroscopy (EDX) has illustrated a higher Si incorporation in NWs than that in two-dimensional (2D) layers and Si segregation at the edge of the NW with the highest doping. Moreover, direct transport measurements on single NWs have revealed a controlled doping with resistivity from 2 × 10−2 to 10−3 Ω.cm for Si doped NWs. Field effect tra…