Nanocomposites based on clay nanoparticles and block copolymer

2008

Halloysite nanotubes as a carrier of cornelian cherry (Cornus mas L.) bioactives

2020

Abstract Cornelian cherry fruit extract rich in anthocyanins and iridoids was encapsulated in the halloysite nanotubes in order to obtain a stable nanoscale system for better delivery and prolonged release of bioactive constituents. The cyclic vacuum technique was used for halloysite nanotubes-cornelian cherry composite preparation and the loading of 8.5 wt% was achieved. Pure cornelian cherry extract exhibited antiproliferative effect on HT-29, MCF7, and MRC-5 cells, pristine halloysite nanotubes affected the growth of MCF7 cells, while halloysite nanotubes-cornelian cherry composites demonstrated proliferative activity in all tested cells. The sustained release of anthocyanins was achieve…

Design of PNIPAAM covalently grafted on halloysite nanotubes as a support for metal-based catalysts

2016

A thermo-responsive polymer such as poly(N-isopropylacrylamide) (PNIPAAM) was covalently grafted on the external surface of halloysite nanotubes (HNTs) by means of microwave irradiation. This nanomaterial was used as a support and stabilizer for palladium nanoparticles. The obtained HNT–PNIPAAM/PdNPs was characterized by means of TGA, SEM, EDS and TEM analyses. The palladium content of the catalyst was estimated to be 0.4 wt%. The stability of the catalytic material at different temperatures (below and above the PNIPAAM lower critical solution temperature) was tested in the Suzuki reaction under microwave irradiation. In addition, TEM analysis after five consecutive runs was performed. The …

Adsorption of a dye on clay and sand. Use of cyclodextrins as solubility-enhancement agents.

2007

Abstract Laboratory-scale studies were aimed at elucidating the physico-chemical aspects on the removal process of crystal violet (CV) from waters and solid substrates. The laponite clay (RD) and sand were chosen for the double aim at investigating them as CV adsorbents for water treatment and as substrates which mime the soil components. Sand is very effective in removing CV from waters. The cyclodextrins (CDs) were exploited as solubility-enhancement agents to remove CV from the solid substrates. They are powerful solvent media because they extract the CV from sand forming water-soluble CV/CD inclusion complexes and do not show affinity for sand. Optimum performance was shown by the modif…

Calorimetric and Volumetric Investigations of the Effect of the Hydrophobicity of the Surfactant on the Binding between (Ethylene oxide)13-(propylene…

2004

The enthalpy and the volume of transfer (DeltaY(t)) of the unassociated (ethylene oxide)(13)-(propylene oxide)(30)-(ethylene oxide)(13) (L64) from water to the aqueous sodium alkanoate solutions as functions of the surfactant concentrations (m(S)) were determined at 298 K. The surfactants studied are sodium hexanoate, sodium heptanoate, sodium octanoate, sodium undecanoate, and sodium dodecanoate. As a general feature, for the short alkyl chain surfactants, DeltaY(t) describes an S-shaped curve in the range of m(S) analyzed whereas for the more hydrophobic surfactants the DeltaY(t) vs m(S) trends exhibit maxima which appear at ms values very close to the critical micellar concentration in w…

MICROWAVE-ASSISTED FUNCTIONALIZATION OF HALLOYSITE NANOTUBE SURFACE

2014

Halloysite, Al2Si2O5·2H2O, is a naturally occurring two-layered alluminosilicate, chemically similar to kaolin, which has a predominantly high-aspect-ratio hollow tubular structure in the submicrometer range and an internal diameter in the nanometer range. The size of halloysite nanotubes (HNTs), generally varies from 50 to 70 nm in external diameter, ca. 15 nm diameter lumen, and 0.5 to 1 μm in length. Halloysite tubes have aluminol (Al-OH) groups on the internal surface and siloxan groups (Si-O-Si) on the external surface. The very large diameter of the halloysite lumen makes it potentially suitable for the accommodation of a range of guests. In recent reports, for example, the mesoporous…

Co-loaded cardanol/triazole-halloysite system: characterization of the supramolecular complex and evaluation of its antiproliferative activity

2014

Halloysite nanotubes modified with triazolium salts (f-HNT) were found to be promising drug carriers for biological molecules [1 ]. In this work we report data about f-HNT as carrier for cardanol, a molecule with interesting biological activity [2]. The interactio n between cardanol and f- HNT was highlighted by HPLC, FTIR spectroscopy, TGA , water contact angle measurements and SEM investigations. Release of cardanol from the system and cytotoxic e ffect of the complex f- HNT/Card on hepatocarcinoma cell lines were, also, evaluated. The obtained results put forward the use of halloysite as drug c arrier

INTERACTIONS BETWEEN NANOCLAYS AND BIOPOLYMERS EVIDENCED BY EXTENSIVE THERMODYNAMIC AND STRUCTURAL STUDIES

2011

Composizione per uso nella finitura, conservazione, restauro di manufatti

2017

L’invenzione è relativa ad una composizione per il consolidamento e la conservazione di fibre tessili basata sull’impiego di un nano materiale in associazione con un agente di supporto. Il nano materiale è la nano fibroina e il materiale di supporto è preferenzialmente il chitosano, ma si possono impiegare altri materiali di analoghe prestazioni. La composizione trova applicazione nell’ambito della conservazione e restauro di materiali tessili, in quanto permette la riparazione di fibre e tessuti danneggiati, ripristinando le proprietà meccaniche, e la protezione da processi foto-ossidativi dei manufatti tessili in generale. Ulteriore campo di applicazione è quello del finissaggio di fibre …

Halloysite Nanotube with Fluorinated Lumen: Non-Foaming Nanocontainer for Storage and Controlled Release of Oxygen in Aqueous Media

2014

Halloysite clay nanotubes were selectivity modified by adsorbing perfluoroalkylated anionic surfactants at the inner surface. The modified nanotubes formed kinetically stable dispersions due to the enhanced electrostatic repulsions exercised between the particles. We proved that the modified nanotubes can be used as non-foaming oxygen nanocontainers in aqueous media. The gas release from supersaturated dispersions can be controlled by external stimuli and system composition. In conclusion, we managed to put forward an easy strategy to develop smart materials from natural nanoclays, which can endow important applications like the storage and delivery of gas.

Synthesis and characterization of modified sulfonated chitosan for beryllium recovery

2019

Abstract A new adsorbent, sulfated crosslinked chitosan (SGCH), has been synthesized for the effective extraction of beryllium ions from their aqueous solutions. In recent times, beryllium extraction has been of great importance because beryllium can be used in many applications such as in nuclear reactor, heat shields, high-technology ceramics, alloys and electronic heat sinks. SGCH has been synthesized by two successive phases. The first is the conversion of chitosan (CH) into non-soluble cross-linked chitosan (GCH) through the interaction between chitosan and glutaraldehyde. The second step is the formation of functional sulfonate groups onto the adsorbent material through the interactio…

Preparation of palladated porous nitrogen-doped carbon using halloysite as porogen: disclosing its utility as a hydrogenation catalyst

2020

AbstractIn this article, halloysite nanoclay (Hal) was used as porogen for the synthesis of nitrogen doped porous carbon material with high specific surface area and pore volume. To this purpose, polymerization of melamine and terephthalaldehyde (MT) was performed in the presence of amine-functionalized carbon coated Hal (Hal@Glu-2N) that was prepared from hydrothermal treatment of Hal and glucose. Then, the prepared nanocomposite was palladated and carbonized to afford Pd@Hal@C. To further improve the textural properties of the nanocomposite, and introduce more pores in its structure, Hal nanotubes were etched. The characterization of the resulting compound, Pd@C, and comparing it with Pd@…

Dispersions of nanosilica in biocompatible copolymers

2010

Dispersions of nanosilica in matrices of biocompatible copolymers were prepared by melt blending. Copolymers with variable molecular size at fixed hydrophilic/hydrophobic ratio and nanosilicas with different interfacial areas were studied. For comparison, a nanoclay was also investigated. The interfacial area played a relevant role in conferring peculiar properties on the nanohybrids. Amazingly, the macromolecule adsorbed on the nanosilica surface maintains some crystallinity which was quantitatively evaluated. In contrast, all the macromolecule anchored to the nanoclay surface is amorphous. The change of the crystalline state was reflected in the dielectric and the electrical conductivity …

Biopolymer-Targeted Adsorption onto Halloysite Nanotubes in Aqueous Media.

2017

Studies on the adsorption of biopolymers onto halloysite nanotubes (HNTs) in water were conducted. Three polymers with different charges-anionic (pectin), neutral (hydroxypropyl cellulose), and cationic (chitosan)-were chosen. The thermodynamic parameters for the adsorption of polymers onto the HNT surface were determined by isothermal titration calorimetry (ITC). The experimental data were interpreted based on a Langmuir adsorption model. The standard variations in free energy, enthalpy, and entropy of the process were obtained and discussed. Turbidimetry was used to evaluate the stability of functionalized nanoparticles in water. The ζ-potential clarified the surface charge properties of …

Paper consolidation with Halloysite nanotubes. TGA, DMA and contact angle investigations

2013

Insights into grafting of (3-Mercaptopropyl) trimethoxy silane on halloysite nanotubes surface

2020

Abstract Functionalization of halloysite nanotubes surface by using organosilanes is sensitive to the reaction conditions. Halloysite nanotubes (HNTs) were modified using (3-Mercaptopropyl) trimethoxy silane (MPTMS). The experiments were performed under different reaction conditions including, various solvents [Toluene, Tetrahydrofuran (THF), Ethanol, n-Hexane, 1,4 Dioxane and Acetonitrile], water content in the reaction media, volume of solvent, number of moles of silane and catalysts (triethyl amine, ammonia solution and tetra-ethoxy titanium). The elemental analysis, FT-IR analysis were used to identify the samples, which attained the highest percent of functionalization. SEM image and t…

Halloysite Nanotubes and Metal Corrosion Inhibitors: A Computational and Experimental Study

2019

Halloysite nanotubes are widely used as a substrate for the controlled release of various types of molecules in an increasing number of applications. In this work, the interactions of halloysite silicic and aluminic surfaces with corrosion inhibitor compounds, such as benzotriazole, 8-hydroxyquinoline, 2-mercaptobenzimidazole, and 2-mercaptobenzothiazole, were investigated from a computational point of view. Two new halloysite compounds with salicylaldoxime and quinaldic acid were designed. Here we propose their synthesis, evaluate amounts of loading, and analyze the adsorption behavior.

Tubular Nanocontainers for Drug Delivery

2018

ChemInform Abstract: Green Conditions for the Suzuki Reaction Using Microwave Irradiation and a New HNT-Supported Ionic Liquid-Like Phase (HNT-SILLP)…

2014

Aryl iodides are coupled with conversions comparable to aryl bromides whereas conversions of aryl chlorides are significantly lower.

Dual drug-loaded halloysite hybrid-based glycocluster for sustained release of hydrophobic molecules

2016

A dual drug-loaded HNT–CD glycocluster delivery system based on halloysite nanotubes and carbohydrate functionalized cyclodextrin was developed by a green protocol using solvent-free microwave irradiation. The nanohybrid was employed for concurrent load and release of silibinin and curcumin. The new delivery system was characterized by means of TGA, FT-IR spectroscopy, SEM and DLS. These techniques confirm the successful loading of the two drugs in the system. SEM and DLS measurements highlighted that the nanomaterial preserves a tubular structure with an average hydrodynamic radius of ca. 200 nm. The release of the drugs from the HNT glycocluster was investigated by means of UV-vis spectro…

Halloysite Nanotubes: Controlled Access and Release by Smart Gates

2017

© 2017 by the authors. Licensee MDPI, Basel, Switzerland. Hollow halloysite nanotubes have been used as nanocontainers for loading and for the triggered release of calcium hydroxide for paper preservation. A strategy for placing end-stoppers into the tubular nanocontainer is proposed and the sustained release from the cavity is reported. The incorporation of Ca(OH) 2 into the nanotube lumen, as demonstrated using transmission electron microscopy (TEM) imaging and Energy Dispersive X-ray (EDX) mapping, retards the carbonatation, delaying the reaction with CO 2 gas. This effect can be further controlled by placing the end-stoppers. The obtained material is tested for paper deacidification. We…

Ecocompatible Halloysite/Cucurbit[8]uril Hybrid as Efficient Nanosponge for Pollutants Removal

2016

Hybrid materials based on halloysite nanotubes (HNT) and cucurbit[8]uril (CB[8]) were prepared with the aim to obtain efficient nanosponges towards hydrocarbons both in liquid and vapor phases. The loading on both HNT surfaces and the hybrid morphology were evidenced by FTIR spectroscopy, thermogravimetric analysis and scanning electron microscopy. In order to highlight the interactions in the hybrid 13C {1H} CP-MAS NMR experiments were performed. The aqueous colloidal stability of HNT/CB[8] was highlighted through ζ potential and dynamic light scattering measurements. The HNT/CB[8] composite was employed as nanosponge to capture aromatic oils in aqueous phase as evidenced by fluorescence e…

Multifunctional Carrier Based on Halloysite/Laponite Hybrid Hydrogel for Kartogenin Delivery

2018

[Image: see text] A novel carrier system based on halloysite nanotubes (HNT), for the potential intraarticular delivery of kartogenin (KGN) by means laponite (Lap) hydrogel (HNT/KGN/Lap), is developed. The drug was first loaded into HNT, and the hybrid composite obtained was used as filler for laponite hydrogel. Both the filler and the hydrogel were thoroughly investigated by several techniques and the hydrogel morphology was imaged by transmission electron microscopy. Furthermore, the gelating ability of laponite in the presence of the filler and the rheological properties of the hybrid hydrogel were also investigated. The kinetic release of kartogenin from HNT and HNT/Lap hybrid hydrogel …

Ecotoxicity of halloysite nanotube-supported palladium nanoparticles inRaphanus sativusL

2016

Halloysite nanotubes (HNTs) are natural nanomaterials that are biocompatible and available in large amounts at low prices. They are emerging nanomaterials with appealing properties for applications like support for metal nanoparticles (NPs). The potential environmental impacts of NPs can be understood in terms of phytotoxicity. Current research has been focusing on HNT applications in cell or animal models, while their use in plants is limited so their ecotoxicological impact is poorly documented. To date there are no studies on the phytotoxic effects of functionalized halloysites (functionalized-HNTs). To develop a quantitative risk assessment model for predicting the potential impact of H…

Heat Capacity of Transfer of (Ethylene oxide)13-(propylene oxide)30-(ethylene oxide)13 from Water to the Aqueous Anionic Surfactant Solutions at 298 …

2004

Heat capacities of transfer (ACpt) of unimeric (ethylene oxide)(13)-(propylene oxide)(30)-(ethylene oxide)(13) from water to the aqueous surfactant solutions as functions of the surfactant concentrations (m(S)) were determined at 298 K. The surfactants investigated are sodium hexanoate, sodium heptanoate, sodium octanoate, sodium undecanoate, and sodium dodecanoate. For short alkyl chain surfactants, the profiles of the DeltaCp(t) versus ms curves show maxima and minima; for long alkyl chain surfactants, the maximum becomes sharper and moved to lower ms values whereas the minimum tends to disappear. These experimental trends are different from those of the enthalpy in agreement with the fac…

Pre- and post-modification of mixed cyclodextrin-calixarene co-polymers: A route towards tunability

2017

Various pre-modified and post-modified cyclodextrin-calixarene hyper-reticulated co-polymers were synthesized, fully characterized by different techniques (FT-IR, 13C{1H} CP-MAS and LGFS solid-state NMR, thermogravimetry, porosimetry), and tested to assess their absorption abilities as nanosponges. The construction of the polymer network was accomplished exploiting the well-known CuAAC reaction between two different heptakis-6-azido-β-cyclodextrins and two different propargyloxy-calix[4]arenes. Post-modification was aimed to achieve the presence of ionizable (acidic or basic) groups on the polymer framework. Sequestration tests towards two model pollutant molecules surprisingly showed that …

SYNTHESIS AND CHARACTERIZATION BY THERMOGRAVIMETRIC ANALYSIS OF A NEW DRUG DELIVERY SYSTEM BASED ON HALLOYSITE NANOTUBES

2015

A structural comparison of halloysite nanotubes of different origin by Small-Angle Neutron Scattering (SANS) and Electric Birefringence

2018

The structure of halloysite nanotubes (Hal) from different mines was investigated by Small-Angle Neutron Scattering (SANS) and Electric Birefringence (EBR) experiments. The analysis of the SANS curves allowed us to correlate the sizes and polydispersity and the specific surfaces (obtained by a Porod analysis of the SANS data) of the nanotubes with their specific geological setting. Contrast matching measurements were performed on patch Hal (from Western Australia) in order to determine their experimental scattering length density for a more precise analysis. Further characterization of the mesoscopic structure of Hal was carried out by Electric Birefringence (EBR), which allowed to study th…

THERMOMECHANICAL CHARACTERIZATION UNDER CONTROLLED HUMIDITY CONDITIONS OF BIONANOCOMPOSITES BASED ON HALLOYSITE NANOTUBES

2014

Synthesis and characterization of nanomaterial based on halloysite and hectorite clay minerals covalently bridged

2021

Halloysite is an aluminosilicate clay with a predominantly hollow tubular structure (HNTs) able to act as a nanocontainer for the encapsulation of several chemicals. However, HNTs possess low affinity for metal ions in their pristine form and they need to be modified for improving their adsorption capabilities. Therefore, to overcome this issue herein we report a straightforward approach for the covalent modification of the external surface of halloysite nanotubes with hectorite clay. Compared to halloysite, hectorite possesses a lamellar structure with higher cation exchange capacity. The covalent linkage between the two clays was verified by several techniques (FTIR spectroscopy, 13C CP-M…

Exploiting the Colloidal Stability and Solubilization Ability of Clay Nanotubes/Ionic Surfactant Hybrid Nanomaterials

2012

Halloysite clay nanotubes are functionalized by exploiting the different charges between the inner positive and the outer negative surfaces; accordingly, a selective adsorption is pursued by employing anionic and cationic surfactants. The obtained hybrid materials dispersed in aqueous phase are studied from the physicochemical viewpoint to investigate the colloidal stability that is a crucial parameter for applications. It is demonstrated that the adsorption of anionic surfactant into the HNTs lumen increases the net negative charge of the nanotubes enhancing the electrostatic repulsions and consequently the dispersion stability. The solubilization capability of these functionalized nanotub…

PyDSC: a simple tool to treat differential scanning calorimetry data

2020

AbstractHerein, we describe an open-source, Python-based, script to treat the output of differential scanning calorimetry (DSC) experiments, called pyDSC, available free of charge for download at https://github.com/leonardo-chiappisi/pyDSC under a GNU General Public License v3.0. The main aim of this program is to provide the community with a simple program to analyze raw DSC data. Key features include the correction from spurious signals, and, most importantly, the baseline is computed with a robust, physically consistent approach. We also show that the baseline correction routine implemented in the script is significantly more reproducible than different standard ones proposed by propriet…

Effect of short homopolymer on structure and gelation of aqueous laponite dispersions

2007

Copolymer−Cyclodextrin Inclusion Complexes in Water and in the Solid State. A Physico-Chemical Study

2008

The formation of inclusion complexes (ICs) composed of cyclodextrins (CDs) and poly(ethylene oxides)-poly(propylene oxides)-poly(ethylene oxides) (PEO-PPO-PEO) was studied. To this purpose, native and hydroxypropyl cyclodextrins with different cavity size were chosen. The PEO-PPO-PEO copolymers were selected to study the role of the molecular weight, keeping constant the hydrophilic/hydrophobic ratio, and the hydrophilicity. The volumetric studies at 25 degrees C allowed to determine the equilibrium constant and the volume change for the IC formation in water as well as the IC stoichiometry. Surface tension experiments evidenced that the copolymer and the CD interfacial behavior is controll…

Halloysite Nanotubes for Cleaning, Consolidation and Protection

2017

Herein, we report our recent research concerning the development of halloysite based protocols for cleaning, consolidation and protection purposes. Surface modification of halloysite cavity by anionic surfactants was explored to fabricate inorganic micelles able to solubilize hydrophobic contaminants. Hybrid dispersions based on halloysite and ecocompatible polymers were tested as consolidants for paper and waterlogged archaeological woods. Encapsulation of deacidifying and flame retardant agents within the halloysite lumen was conducted with aim to obtain nanofiller with a long-term protection ability. The results prove the suitability and versatility of halloysite nanotubes, which are per…

Functionalized halloysite nanotubes: Efficient carrier systems for antifungine drugs

2018

Abstract Halloysite-cyclodextrin hybrid was employed as carrier for sustained release of clotrimazole for vaginal or buccal treatment of Candidiasis. The nanocarrier was obtained by functionalization of halloysite surface with cyclodextrin moieties by means of microwave irradiation, with the final goal to obtain a scaffold for the covalent linkage of cysteamine hydrochloride. The interaction between clotrimazole and the pristine components, namely cyclodextrin and halloysite, was thoroughly investigated by several techniques such as DSC, TGA, UV–vis spectroscopy and some adsorption studies were, also, carried out. The release of the antifungine molecule was finally investigated in a medium …

A thermodynamic study to evidence the alpha,omega-dichloroalkane/ block copolymer mixed aggregates formation: effect of the copolymer architecture.

2006

Abstract The thermodynamics of α , ω -dichloroalkanes in aqueous solutions of (ethylene oxide)11(propylene oxide)16(ethylene oxide)11 (L35) and (propylene oxide)8(ethylene oxide)23(propylene oxide)8 (10R5) was determined at 298 and 305 K. Modeling the experimental data allowed to calculate the standard free energy ( Δ G D o / w ) and the volume ( Δ V D / w ) for the additive–copolymer mixed aggregates formation per additive molecule. Δ G D o / w for Cl2CH2 and Cl2(CH2)2 evidenced that the process is controlled by the forces exercising between the chlorine atoms and the OH groups of the copolymer micelles protruded into the aqueous phase. Cl2(CH2)3 experiences both the hydrophilic and hydrop…

Halloysite nanotubes: a green resource for materials and life sciences

2020

Clay minerals are considered one of the materials of the 20th century for their peculiar physico-chemical features. Among them, halloysite nanotubes (HNTs) are an emerging nanomaterial with a particular tubular structure that makes them a low cost and valuable alternative to the most common carbon nanotubes. Due to their tubular morphology, HNTs are employed in several fields acting as nanocontainers for different compounds for applications in drug carrier and delivery fields, catalysis, and as filler for polymeric matrices. The modification of HNTs’ surfaces allows to the synthesis of different nanoarchitectures that can improve the mechanical and thermal performance of polymer as well as …

Nonporous, Strong, Stretchable, and Transparent Electrospun Aromatic Polyurea Nanocomposites as Potential Anticorrosion Coating Films

2021

This study, for the first time, focused on the fabrication of nonporous polyurea thin films (~200 microns) using the electrospinning method as a novel approach for coating applications. Multi-walled carbon nanotubes (MWCNTs) and hydrophilic-fumed nanosilica (HFNS) were added separately into electrospun polyurea films as nano-reinforcing fillers for the enhancement of properties. Neat polyurea films demonstrated a tensile strength of 14 MPa with an elongation of 360%. At a loading of 0.2% of MWCNTs, the highest tensile strength of 21 MPa and elongation of 402% were obtained, while the water contact angle remained almost unchanged (89°). Surface morphology analysis indicated that the producti…

Effect of the supramolecular interactions on the nanostructure of halloysite/biopolymer hybrids: A comprehensive study by SANS, fluorescence correlat…

2020

The structural properties of halloysite/biopolymer aqueous mixtures were firstly investigated by means of combining different techniques, including small-angle neutron scattering (SANS), electric birefringence (EBR) and fluorescence correlation spectroscopy (FCS). Among the biopolymers, non-ionic hydroxypropylcellulose and polyelectrolytes (anionic alginate and cationic chitosan) were selected. On this basis, the specific supramolecular interactions were correlated to the structural behavior of the halloysite/biopolymer mixtures. SANS data were analyzed in order to investigate the influence of the biopolymer adsorption on the halloysite gyration radius. In addition, a morphological descript…

Nanocarrier based on halloysite and fluorescent probe for intracellular delivery of peptide nucleic acids

2022

The development of systems able to deliver genetic material into a target site is a challenge for modern medicine. Single-stranded peptide nucleic acids have attracted attention as promising therapeutic molecules for diagnostic and gene therapy. However, their poor cell membrane permeability represents a drawback for biomedical applications. Halloysite nanotubes (HNTs) are emerging materials in drug delivery applications both for their ability to penetrate cell membranes and for enhancing the solubility of drugs in biological media. Herein, we report the first example of the use of a nanocarrier based on halloysite labelled with fluorescent switchable halochromic oxazine molecules, to deliv…

Thermodynamics of Aqueous Poly(ethylene oxide)−Poly(propylene oxide)−Poly(ethylene oxide)/Surfactant Mixtures. Effect of the Copolymer Molecular Weig…

2004

A calorimetric study was performed to focus attention on the interactions between copolymers and anionic surfactants in aqueous solutions. Three aspects were analyzed: (1) the hydrophobicity of the surfactant, (2) the change of the copolymer molecular weight, and (3) the nature of the hydrophilicity of the copolymer. To this purpose, the family of sodium alkanoates (sodium octanoate through sodium dodecanoate) and the triblock copolymers EO76PO 29EO76 (F68), EO103PO39EO 103 and EO132PO50EO132 were investigated. Comparing F68 and EO13PO30EO13 (L64), previously studied by us, provided information on the effect of the copolymer hydrophilicity. The experimental data were analyzed by means of a …

Ciprofloxacin carrier systems based on hectorite/halloysite hybrid hydrogels for potential wound healing applications

2021

The design of multifunctional nanomaterials which can help the healing processes of skin, preventing the bacterial infections, is crucial for the development of suitable therapy for the treatment of chronic lesions. The use of clay minerals in wound healing applications is well documented since the prehistoric period and offers several advantages due to their intrinsic properties. Herein, we report the development of ciprofloxacin carrier systems based on hectorite/halloysite (Ht/Hal) hybrid hydrogels for potential wound healing applications. To achieve this objective firstly the ciprofloxacin molecules were loaded onto Hal by a supramolecular and covalent approach. The so obtained fillers …

Selectivity of cyclodextrins as a parameter to tune the formation of pseudorotaxanes and micelles supramolecular assemblies. A systematic SANS study

2011

Dieser Beitrag ist mit Zustimmung des Rechteinhabers aufgrund einer (DFG geförderten) Allianz- bzw. Nationallizenz frei zugänglich. This publication is with permission of the rights owner freely accessible due to an Alliance licence and a national licence (funded by the DFG, German Research Foundation) respectively. We studied the formation of polypseudorotaxanes formed with cyclodextrins (CDs) threading a copolymer chain that forms self-assembled structures in water. The size of the CD cavity was chosen such that it is block selective with respect to the formation of inclusion complexes and therefore in terms of altering the structure of the copolymer self-assemblies in a systematic fashio…

Polymeric micelles as a new generation of anti-oxidant carriers

2017

A promising strategy to immobilize a natural stabilizer in polymeric films is presented. Par-Ticularly, nevadensin (N, a natural basil flavonoid) molecules have been encapsulated in Pluronic F-127 micelles [F127, a triblock copolymer poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide)] and the obtained nanoparticles have been introduced in poly(ethylene glycol), PEG [otherwise known as poly(ethylene oxide), PEO]. In order to verify the effectiveness of the micelles as anti-oxidant carriers, PEG-based films have been subjected to artificial weathering. The encapsulation of anti-oxidant molecules allows the enhancement of N solubility in PEG, leading to advanced materials with enh…

Pharmaceutical properties of supramolecular assembly of co-loaded cardanol/triazole-halloysite systems

2015

Halloysite nanotubes were explored as drug carrier for cardanol, which is considered as a promising natural anticancer active species. To this aim, besides the pristine nanoclay, a chemical modification of the nanocarrier was performed by attaching triazolium salts with different hydrophobicity at the outer surface of the hollow nanotubes. The interaction between cardanol and nanotubes was highlighted in solution by HPLC. This method proved the loading of the drug into the nanotubes. The solid dried complexes formed by pristine and modified halloysite with the cardanol were characterized by IR spectroscopy, thermogravimetric analysis as well as water contact angle to evidence the structure,…

Understanding the Effects of Crosslinking and Reinforcement Agents on the Performance and Durability of Biopolymer Films for Cultural Heritage Protec…

2021

In the last two decades, the naturally occurring polysaccharides, such as chitosan and pectin, have gained great attention having potential applications in different sectors, from biomedical to new generation packaging. Currently, the chitosan and pectic have been proposed as suitable materials also for the formulation of films and coatings for cultural heritage protection, as well as packaging films. Therefore, the formulation of biopolymer films, considering only naturally occurring polymers and additives, is a current challenging trend. This work reports on the formulation of chitosan (CS), pectin (PC), and chitosan:pectin (CS:PC) films, also containing natural crosslinking and reinforce…

Halloysite nanotubes with fluorinated cavity: an innovative consolidant for paper treatment

2016

AbstractHybrid material based on halloysite nanotubes (HNTs) and sodium perfluorooctanoate (NaPF8) was used as a consolidant for paper treatment. The consolidation efficiency was determined by thermogravimetry as well as by paper grammage determination. Morphological analysis of the treated paper was performed by means of scanning electron microscopy while the effect of modified HNTs on the thermal behaviour of the cellulose fibres was investigated by differential scanning calorimetry which determined the combustion enthalpy of the paper.Water contact angle measurements were performed to study the paper wettability. The physico-chemical properties investigated (mesoscopic structure, thermal…

Coffee grounds as filler for pectin: Green composites with competitive performances dependent on the UV irradiation.

2017

Novel composite bioplastics were successfully prepared by filling pectin matrix with treated coffee grounds. The amount of coffee dispersed into the pectin was changed within a wide filler range. The morphology of the pectin/coffee hybrid films was studied by microscopic techniques in order to investigate their mesoscopic structure as well as the sizes distribution of the particles dispersed into the matrix. The micrographs showed that the coffee grounds are uniformly dispersed within the polymeric matrix. The morphological characteristics of the biocomposite films were correlated to their properties, such as wettability, water uptake, thermal behavior and mechanical performances. Dynamic m…

Palladium supported on Halloysite-triazolium salts as catalyst for ligand free Suzuki cross-coupling in water under microwave irradiation

2015

Abstract Environmental friendly halloysite-dicationic triazolium salts (second generation) obtained by subsequent click reactions of a diyne derivative in the presence of 2-azidopropyl-modified halloysite nanotubes, were used as supports for palladium catalyst. Thanks to the high triazolium loading (25%) these materials were able to support higher amount of the metal than that on the monocationic derivative (first generation). Such materials were characterized by thermogravimetric analysis, FT-IR spectroscopy and SEM investigations. The new catalytic system was employed in the ligand free Suzuki cross-coupling under microwave irradiation. A set of solvent, time and% loading of palladium was…

Sonication-Induced Modification of Carbon Nanotubes: Effect on the Rheological and Thermo-Oxidative Behaviour of Polymer-Based Nanocomposites.

2018

The aim of this work is the investigation of the effect of ultrasound treatment on the structural characteristics of carbon nanotubes (CNTs) and the consequent influence that the shortening induced by sonication exerts on the morphology, rheological behaviour and thermo-oxidative resistance of ultra-high molecular weight polyethylene (UHMWPE)-based nanocomposites. First, CNTs have been subjected to sonication for different time intervals and the performed spectroscopic and morphological analyses reveal that a dramatic decrease of the CNT's original length occurs with increased sonication time. The reduction of the initial length of CNTs strongly affects the nanocomposite rheological behavio…

Thermodynamic Behavior of Non-Ionic Tri-block Copolymers in Water at Three Temperatures

2006

Apparent molar volumes (V Φ) of aqueous solutions of some copolymers, based on ethylene oxide (EO) and propylene oxide (PO) units, were determined as functions of concentration at three temperatures. Viscosity measurements were also carried out on some of these systems. The effects studied include how the molecular architecture and the molecular weight affect the aggregation of the copolymer, keeping constant the EO/PO ratio. Modeling of the volumetric data yielded the partial molar volume of the copolymer in the standard (V°) and the aggregated (V M) states, as well as the equilibrium constant for micellization and the aggregation number. Analysis of the viscosity data supported the insigh…

Aqueous phase/nanoparticles interface: hydroxypropyl cellulose adsorption and desorption triggered by temperature and inorganic salts

2012

The study highlighted the main forces driving the adsorption of hydroxypropyl cellulose (HPC) onto clay nanoparticles with a disk-like shape (Laponite RD). Modeling the isothermal titration calorimetry data provided the key thermodynamic properties, which enabled us to discuss the microscopic aspects contributing to the energetic and the entropic changes of the polymer adsorption at the nanoparticle/liquid interface. We evidenced that the process is strongly enthalpy-driven and that the interactions lead to constraints of the HPC configuration at interface. The functionalized nanoparticles enhanced the polymer solubility in water expanding the one-phase area of the binodal curve. Temperatur…

WOOD TREATMENT BASED ON HALLOYSITE/HYDROXYPROPYL CELLULOSE COMPOSITE. THERMOMECHANICAL AND POROSITY CHARACTERIZATION

2014

Sintesi e attivita’ fotocatalitica di materiali compositi ciclodestrina/ossido di grafene/nanoparticelle di argento

2019

Engineering of polylactic acids for biomedical applications

Multicavity halloysite-amphiphilic cyclodextrin hybrids for co-delivery of natural drugs into thyroid cancer cells

2015

Multicavity halloysite nanotube materials were employed as simultaneous carriers for two different natural drugs, silibinin and quercetin, at 6.1% and 2.2% drug loadings, respectively. The materials were obtained by grafting functionalized amphiphilic cyclodextrin onto the HNT external surface. The new materials were characterized by FT-IR spectroscopy, SEM, thermogravimetry, turbidimetry, dynamic light scattering and ζ-potential techniques. The interaction of the two molecules with the carrier was studied by HPLC measurements and fluorescence spectroscopy, respectively. The release of the drugs from HNT-amphiphilic cyclodextrin, at two different pH values, was also investigated by means of…

Volumes of aqueous block copolymers based on poly(propylene oxides) and poly(ethylene oxides) in a large temperature range: A quantitative description

2006

The focus of this paper was on a quantitative comprehension of temperature effect on the volumes of aqueous di-block and triblock copolymers, based on propylene oxide (PO) and ethylene oxide (EO) units. To this purpose, literature data dealing with (EO316PO94 + water) and (EO13PO30EO13 + water) mixtures were analyzed. The volume vs. temperature trends were rationalized on the basis of the (unimers + aggregate) equilibrium by taking into account the temperature effect on both the partial molar volumes of the unimeric and the aggregated copolymer as well as the equilibrium constant of micellization. The analysis extended to the expansibility allowed to quantify the contribution for the shift …

Selective Cytotoxic Activity of Prodigiosin@halloysite Nanoformulation

2020

Prodigiosin, a bioactive secondary metabolite produced by Serratia marcescens, is an effective proapoptotic agent against various cancer cell lines, with little or no toxicity toward normal cells. The hydrophobicity of prodigiosin limits its use for medical and biotechnological applications, these limitations, however, can be overcome by using nanoscale drug carriers, resulting in promising formulations for target delivery systems with great potential for anticancer therapy. Here we report on prodigiosin-loaded halloysite-based nanoformulation and its effects on viability of malignant and non-malignant cells. We have found that prodigiosin-loaded halloysite nanotubes inhibit human epithelia…

Synthesis and Characterization of Halloysite-Cyclodextrin Nanosponges for Enhanced Dyes Adsorption

2017

Inorganic-organic nanosponge hybrids based on halloysite clay and organic cyclodextrin derivatives (HNT-CDs) were developed by means of microwave irradiations in solvent-free conditions. The HNT-CDs nanomaterials characterized by FT-IR, TGA, BET, TEM, SEM, DLS, and zeta-potential have showed a hyper-reticulated network which possesses both HNT and cyclodextrin peculiarities. The new HNT-CDs nanosponge hybrids were employed as nanoadsorbents, first choosing Rhodamine B as the dye model, and furthermore for the removal of some cationic and anionic dyes, under different pH values (1.0, 4.54, and 7.4). The collected results showed that the pH solution as well as the electrostatic interactions a…

Effect of halloysite nanotubes filler on polydopamine properties

2019

Abstract Hypothesis Polydopamine (PDA) is widely used as hydrophilic coating for several applications. However, most of the methods studied to improve or manipulate PDA properties are multistep and time-consuming, and there is a need for versatile strategies aimed at controlling and modifying the properties of PDA. Experiments PDA-halloysite nanocomposites were produced under different oxidation conditions in alkaline and acidic media and were characterized by UV–visible and attenuated total refraction- Fourier Transform Infrared spectroscopies, thermogravimetric analysis, porosimetry, scanning electron microscopy, X-ray diffraction and contact angle measurements against the reference PDA p…

Aggregation in aqueous media of tri-block copolymers tuned by the molecular selectivity of cyclodextrins

2009

The water + cyclodextrin + poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) mixtures have been investigated to explore the temperature effect on the aggregation of the copolymer in the presence of cyclodextrins (CDs). The CDs with different cavity sizes were chosen because they may include either the hydrophilic poly(ethylene oxides) block or both kinds of blocks. The differential scanning calorimetry and viscosity experiments straightforwardly evidenced that the critical micellar temperature is shifted to larger values by adding a CD which is able to include the middle poly(propylene oxide) block while it is not influenced by the presence of CD which is selective to the poly…

Prodrug based on halloysite delivery systems to improve the antitumor ability of methotrexate in leukemia cell lines

2021

The prodrug approach, as well as the development of specific systems able to deliver a chemotherapeutic agent in the target site, decreasing the side effects often associated with its administration, are still a challenging. In this context, both methotrexate drug molecules (MTX) and biotin ligand moieties, whose receptors are overexpressed on the surface of several cancer cells, were loaded on halloysite nanotubes (HNTs) to develop nanomaterial based on multifunctional and "smart" delivery systems. To highlight the crucial role played by biotin, carrier systems based on HNTs and MTX were also synthetized. In detail, several approaches were envisaged: i) a supramolecular interaction between…

GREEN CONDITIONS FOR THE SUZUKI REACTIONS BY USING MICROWAVE IRRADIATION AND MODIFIED HALLOYSITE/Pd CATALYST

2014

Halloysite nanotube (HNT) is an emerging biocompatible material with appealing perspective for technological applications, such as in catalysis1 and in pharmaceutical research.2 Halloysite is a double-layered aluminosilicate mineral that has a predominantly hollow tubular structure. The functionalization of HNTs is a good strategy to introduce an organic moiety onto the external surface and, therefore, to obtain innovative catalyst supports.3 We have modified the external surface of halloysite nanotube with octylimidazolium moieties (HNT-IL) by microwave irradiation in solvent-free conditions and we have have employed this material as support catalyst of Pd nanoparticles. The new HNT/Pd cat…

Clay/Non-Ionic Surfactant Hybrid Nanocomposites

2020

This chapter gives an overview of the structural and chemical physical properties of nanocomposites formed by clay minerals and surfactants, which represent a class of materials with promising features for applications in different industrial, biomedical, and environmental applications. Due to their non-toxicity and biocompatibility, a great deal of attention is nowadays devoted to the study of non-ionic surfactants. Among them, block copolymers represent a combination of the properties of common amphiphilic molecules and long polymer chains. These macromolecules can form a great variety of supra-molecular structures generated from self-organization phenomena in aqueous media. Nanostructure…

Pd nanoparticles immobilized on the poly-dopamine decorated halloysite nanotubes hybridized with N-doped porous carbon monolayer: A versatile catalys…

2020

A hybrid catalyst, Pd@Hal-pDA-NPC, with the utility for promoting both C–C coupling reactions (Sonogashira, Heck and Suzuki reactions) and hydrogenation of nitrocompounds is prepared through two main steps. First, Pd(0) nanoparticles was immobilized on the poly-dopamine decorated halloysite nanotubes (Hal-pDA) and then Pd@Hal-pDA was hybridized with the layers of a novel multi-N-doped porous carbon monolayer derived from 4,4′,4″-((1,3,5-triazine-2,4,6-triyl)tris(azanediyl))tribenzonitrile. The results established that the catalyst could catalyze all the reactions efficiently under mild reaction condition. Moreover Pd@Hal-pDA-NPC exhibited high recyclability (up to ten reac…

Solid state 13C-NMR methodology for the cellulose composition studies of the shells of Prunus dulcis and their derived cellulosic materials.

2020

Lignocellulosic fibers and microcellulose have been obtained by simple alkaline treatment from softwood al- mond shells. In particular, the Prunus dulcis Miller (D.A.) Webb. was considered as a agro industrial waste largely available in southern Italy. The materials before and after purification have been characterized by 13C CPMAS NMR spectroscopy methodology. A proper data analysis provided the relative composition of lignin and holo- cellulose at each purification step and the results were compared with thermogravimetric analysis and FT-IR. To value the possibility of using this material in a circular economy framework, the fibrous cellulosic material was used to manufacture a handmade c…

Safely Dissolvable and Healable Active Packaging Films Based on Alginate and Pectin

2019

Extensive usage of long-lasting petroleum based plastics for short-lived application such as packaging has raised concerns regarding their role in environmental pollution. In this research, we have developed active, healable, and safely dissolvable alginate-pectin based biocomposites that have potential applications in food packaging. The morphological study revealed the rough surface of these biocomposite films. Tensile properties indicated that the fabricated samples have mechanical properties in the range of commercially available packaging films while possessing excellent healing efficiency. Biocomposite films exhibited higher hydrophobicity properties compared to neat alginate films. T…

Thermal and Mechanical Characterization of Yarn Samples from Flemish Tapestry of the Sixteenth Century

2022

We propose a physico-chemical approach for theharacterization of the conservation condition of yarns from a Flemish tapestry of the sixteenth century. The aging effect on the yarns’ performance was evaluated by comparison with commercial materials. Water uptake experiments highlighted the aptitude of yarns toward water sorption and their increased hydrophilicity upon aging. Thermogravimetric analysis can be considered a fast approach for the fiber identification and assessment on the material life-time. The dynamic mechanical analysis provided direct evidence on the yarns, conservation state and their performance under different mechanical stresses. The proposed characterization path can be…

Biologically active properties of plant extracts in cosmetic emulsions

2020

Abstract Describes biologically active properties waters plant extracts of domestic herbaceous species as a part cosmetic emulsion in this article. In particular, the antioxidant features related to vitamins, flavonoids, coloring, extractive and tannins were reported. The following research methods as qualitative analysis on groups of biologically active substances, thin-layer chromatography, titrimetry and photometry were used in the work. The ability of extracts to influence the physico-chemical, organoleptic and antioxidant properties of cosmetic emulsion samples was established. The ability of the extracts to exhibit antioxidant and prooxidant effects in cosmetic emulsion samples was de…

Aqueous nonionic copolymer-functionalized laponite clay. A thermodynamic and spectrophotometric study to characterize its behavior toward an organic …

2006

The affinity of functionalized Laponite clay toward an organic material in the aqueous phase was explored. Functionalization was performed by using triblock copolymers based on ethylene oxide (EO) and propylene oxide (PO) units that are EO(11)PO(16)EO(11) (L35) and PO(8)EO(23)PO(8) (10R5). Phenol (PhOH) was chosen as organic compound, which represents a contaminant prototype. To this purpose, densities and enthalpies of mixing as well as PhOH UV-absorption spectra were determined. The enthalpy and the spectrophotometry revealed PhOH-Laponite interactions whereas the volume did not. It emerged that the area occupied by PhOH on the Laponite surface is equal to that computed from the partial m…

NANOCLAYS AND BIOPOLYMERS IN AQUEOUS SOLUTION AND IN SOLID STATE. INTERACTIONS AND STRUCTURE

2011

Effects of halloysite content on the thermo-mechanical performances of composite bioplastics

2020

Abstract The aim of this study is the design and preparation of Mater-Bi/halloysite nanocomposite materials that could be employed as bioplastics alternative to the petroleum derived products. The biocomposite materials at variable halloysite content (from 0 to 30 wt%) were prepared by using the solvent casting method. We investigated the mechanical behaviour and the thermal properties of the prepared nanocomposites in order to estimate their suitability as biocompatible packaging materials. The thermo-mechanical characteristics were correlated to the nanocomposites' morphologies, which were studied by Scanning Electron Microscopy (SEM). As a general result, the physico-chemical performance…

Adsorption isotherms and thermal behavior of hybrids based on quercetin and inorganic fillers

2019

We investigated the adsorption process of quercetin onto several inorganic fillers, such as kaolinite, calcium carbonate and alumina. Firstly, we performed equilibrium adsorption studies in order to determine the quercetin/filler adsorption isotherms, which were successfully fitted through the Langmuir model. Based on the adsorption data analysis, we estimated the maximum adsorption capacity of each filler as well as the Langmuir constant, which is related to the affinity between quercetin and the surfaces of the inorganic particles. Then, we prepared hybrids formed by fillers saturated with quercetin. The obtained composites were characterized by thermogravimetric analysis with the aim of …

Why does vacuum drive to the loading of halloysite nanotubes? The key role of water confinement.

2019

The filling of halloysite nanotubes with active compounds solubilized in aqueous solvent was investigated theoretically and experimentally. Based on Knudsen thermogravimetric data, we demonstrated the water confinement within the cavity of halloysite. This process is crucial to properly describe the driving mechanism of halloysite loading. In addition, Knudsen thermogravimetric experiments were conducted on kaolinite nanoplates as well as on halloysite nanotubes modified with an anionic surfactant (sodium dodecanoate) in order to explore the influence of both the nanoparticle morphology and the hydrophobic/hydrophilic character of the lumen on the confinement phenomenon. The analysis of the…

Polysaccharides/Halloysite nanotubes for smart bionanocomposite materials.

2020

Biopolymers as alternative to fossils-derived polymers are attracting the interest of researcher in material science. Besides the economic advantages, the sustainability makes polysaccharides ideal candidates to prepare films and formulations. The addition of Halloysite nanotubes as green inorganic fillers was exploited to improve the physico-chemical properties and to introduce smart response abilities to the material. Halloysite is a natural tubular nanomaterial with hollow cavity and large aspect ratio. The effect of polymer charge on the morphology and mesoscopic properties of polysaccharides/halloysite nanocomposites has been highlighted. Different strategies (solvent casting, lyophili…

Tuning the Hydroxypropyl Cellulose Adsorption and Desorption at the Nanoparticle/Water Interface by Temperature and Inorganic Salts

2011

Laponite clay in homopolymer and tri-block copolymer matrices

2007

Macromolecule/laponite nanomaterials were studied by DSC and X-ray diffraction techniques. The matrices are poly(ethylene) glycols at various molecular masses and poly(ethylene oxides)-poly(propylene oxides)-poly(ethylene oxides) tri-block copolymers. The latter were tuned by modulating the molecular masses, at constant hydrophilic/hydrophobic ratio, and the hydrophilicity. For all the investigated systems, the enthalpy of melting (ΔH m) is nearly constant up to a given composition thereafter it increases monotonically reaching the value of the pure macromolecule. We proposed a model to interpret the DSC data. Briefly, it was invoked a mechanism of interaction following which some segments …

Direct chemical grafted curcumin on halloysite nanotubes as dual-responsive prodrug for pharmacological applications

2016

Covalently functionalized halloysite nanotubes (HNTs) were successfully employed as dual-responsive nanocarriers for curcumin (Cur). Particularly, we synthesized HNT-Cur prodrug with a controlled curcumin release on dependence of both intracellular glutathione (GSH) and pH conditions. In order to obtain HNT-Cur produgs, halloysite was firstly functionalized with cysteamine through disulphide linkage. Afterwards, curcumin molecules were chemically conjugated to the amino end groups of halloysite via Schiff's base formation. The successful functionalization of halloysite was proved by thermogravimetric analysis, FT-IR spectroscopy, dynamic light scattering and scanning electron microscopy. Ex…

Sustainable nanocomposites based on halloysite nanotubes and pectin/polyethylene glycol blend

2013

Abstract This study was focused on the preparation and characterization of biofilms based on pectin/polyethylene glycol 20000 (PEG) blend and halloysite nanotubes (HNTs). The obtained blends loaded with a natural nanoclay are proposed as sustainable alternative to the polymers produced from non-renewable resources such as fossil fuels. Properties of technological interest have been monitored and they were correlated to the structural features of the nanocomposites. It turned out that the wettability of the films can be tuned by changing the composition and the distribution of HNTs into the material as well as the surface roughness. The tensile properties of the blend are enhanced by the pre…

Pickering Emulsions Based on Wax and Halloysite Nanotubes: An Ecofriendly Protocol for the Treatment of Archeological Woods

2020

A novel green protocol for the consolidation and protection of waterlogged archeological woods with wax microparticles has been designed. First, we focused on the development of halloysite nanotubes (HNTs) based Pickering emulsions using wax as the inner phase of the oil-in-water droplets. The optimization of the preparation strategy was supported by both optical microscopy and scanning electron microscopy, which allowed us to show the morphological features of the prepared hybrid systems and their structural properties, i.e., the distribution of the clay at the interface. Also, the dependence of the overall dimensions of the prepared systems on the halloysite content was demonstrated. Micr…

Threading and de-threading of cyclodextrin in a thermosensitive cationic block copolymer in water and at the silica/water interface

2010

The solubilisation behaviour of some dichloroalkanes in aqueous solutions of PEO-PPO-PEO triblock copolymers: a dynamic light scattering, fluorescenc…

2006

The aggregation behaviour of PEO-PPO-PEO triblock copolymers in water and in water + chlorinated additive mixtures was studied by means of fluorescence spectroscopy, dynamic light scattering (DLS), and small-angle neutron scattering (SANS). The copolymers were chosen such as to investigate the effects of molecular architecture (L35 and 10R5) and molecular weight by keeping constant the hydrophilic/hydrophobic balance (F88 and F108). 1,2-Dichloroethane was used as a prototype of water basins contaminants. The hydrodynamic radius of the block copolymer aggregates (R(h,M)) and the intensity ratio of pyrene of the first and the third vibrational band (I(1)/I(3)) were determined as a function of…

Separation of halloysite/kaolinite mixtures in water controlled by sucrose addition: The influence of the attractive forces on the sedimentation beha…

2022

In this work, we propose an easy strategy for the separation of halloysite/kaolinite mixtures in sucrose aqueous solution. Preliminarily, we investigated the influence of the sucrose addition on the colloidal stability of kaolinite nanoplates and halloysite nanotubes (HNTs) dispersed in water. Dynamic Light Scattering (DLS) measurements revealed that the HNTs aqueous mobility is dependent on the sucrose concentration, while the ζ-potential is negligibly affected by the addition of the carbohydrate in the aqueous solvent. On the other hand, any variations on the surface charge and dynamic behavior of kaolinite were detected in the presence of sucrose. The obtained ζ-potential and DLS results…

Halloysite Nanotubes: Interfacial Properties and Applications in Cultural Heritage

2020

The peculiar surfaces of halloysite nanotubes and their biocompatibility are attracting the interest of researchers based on the wide range of attainable applications. The large aspect ratio of this nanotubular material ensures promising properties as a reinforcing agent in polymeric matrixes, such as cellulose and its derivatives, that entail strengthening due to, for instance, aging-induced degradation. The halloysite cavity has a suitable size for hosting a large variety of active species such as deacidifying (calcium hydroxide) and flame retardant agents (fluorinated surfactants) for a controlled and sustained release relevant to the conservation of cultural heritage. Additionally, anio…

Oxadiazolyl-Pyridinium as Cationic Scaffold for Fluorinated Ionic Liquid Crystals

2021

The synthesis and characterization of a new class of 1,2,4-oxadiazolylpyridinium as a cationic scaffold for fluorinated ionic liquid crystals is herein described. A series of 12 fluorinated heterocyclic salts based on a 1,2,4-oxadiazole moiety, connected through its C(5) or C(3) to an N-alkylpyridinium unit and a perfluoroheptyl chain, differing in the length of the alkyl chain and counterions, has been synthesized. As counterions iodide, bromide and bis(trifluoromethane)sulfonimide have been considered. The synthesis, structure, and liquid crystalline properties of these compounds are discussed on the basis of the tuned structural variables. The thermotropic properties of this series of sa…

Highly untangled multiwalled carbon nanotube@polyhedral oligomeric silsesquioxane ionic hybrids: Synthesis, characterization and nonlinear optical pr…

2015

Abstract Highly de-bundled multiwalled carbon nanotube (MWCNT) polymer nanohybrids were obtained via ionic assembling of a novel POSS-polyimidazolium-ionic liquid (POSS = polyhedral oligomeric silsesquioxanes) with oxidized MWCNTs. The synthesis, accomplished by a simple bilayer chloroform/water metathetical reaction process, was promoted by the high surfactant properties of POSS-imidazolium-polyionic liquid, which assisted the effective de-bundling, dispersion and purification of the as prepared POSS@MWCNT polymers in organic media, via a surface coating mechanism. The presence of remarkably intense radial breathing modes (RBMs) in Raman spectra, both in solution and as solid, corroborates…

Boosting the properties of a fluorescent dye by encapsulation into halloysite nanotubes

2021

Abstract The synthesis of a new biocompatible bichromophoric system (CURBO) was developed, by connecting the skeleton of the naturally occurring curcumin to a BODIPY derivative. The system exhibited an intense fluorescence band with maximum at about 510 nm in organic solvent, while its emission spectra in aqueous solution were more complicated and slightly red-shifted, due to the effect of aggregation for the poor solubility of the dyad. To overcome these problems, the bichomophoric system has been loaded into the halloysite nanotubes (HNT). The HNT/CURBO nanocomposite, suspended in aqueous solution, showed an intensity of emission in the red region of the spectrum higher than the one exhib…

Effect on the block copolymer self-assembling in water of block selective cyclodextrin addition

2008

A synergic nanoantioxidant based on covalently modified halloysite–trolox nanotubes with intra-lumen loaded quercetin

2016

We describe the preparation and properties of the first example of a synergic nanoantioxidant, obtained by different functionalizations of the external surface and the inner lumen of halloysite nanotubes (HNTs). Trolox, a mimic of natural α-tocopherol, was selectively grafted on the HNT external surface; while quercetin, a natural polyphenolic antioxidant, was loaded into the inner lumen to afford a bi-functional nanoantioxidant, HNT–Trolox/Que, which was investigated for its reactivity with transient peroxyl radicals and a persistent 1,1-diphenyl-2-picrylhydrazyl (DPPH˙) radical in comparison with the corresponding mono-functional analogues HNT–Trolox and HNT/Que. Both HNT–Trolox and HNT/Q…

On the formation of inclusion complexes at the solid/liquid interface of anchored temperature-responsive PNIPAAM diblock copolymers with γ-cyclodextr…

2017

The thermal responsive behavior of adsorbed layers of diblock copolymers of poly(N-isopropylacrylamide) (PNIPAAM) and poly((3-acrylamidopropyl)trimethylammonium chloride) (PAMPTMA(+)) with γ-cyclodextrin (γ-CD) at the solid/liquid interface has been investigated using three in situ techniques: null ellipsometry, quartz–crystal microbalance with dissipation monitoring, and neutron reflectometry. The measurements provided information about the adsorbed amounts, the layer thickness, hydration and viscoelastic properties, and the interfacial structure and composition. The copolymers adsorb to silica with the cationic PAMPTMA(+) blocks sitting as anchors in a flat conformation and the PNIPAAM ch…

Layered composite based on halloysite and natural polymers: a carrier for the pH controlled release of drugs

2019

We have prepared new biohybrid materials based on halloysite nanotubes and natural polymers (alginate and chitosan) for the controlled and sustained release of bioactive species. A functional nanoarchitecture has been designed allowing us to generate a layered tablet with a chitosan/halloysite nanocomposite film sandwiched between two alginate layers. The assembly of the raw components and the final structure of the hybrid tablet have been highlighted by the morphological and wettability properties of the prepared materials. Since the biohybrid has been designed as a smart carrier, halloysite nanotubes have been first loaded with a model drug (sodium diclofenac). The effect of the tablet th…

Exploring Historical Scientific Instruments by Using Mobile Media Devices

2022

We describe an educational activity that can be completed with mobile media devices in order to understand the working principle of a pair of tuning forks, from the Historical Collection of Physics Instruments of the University of Palermo, and how they were used to explain acoustic interference and beats with the Lissajous optical method. This approach can be used with any tuning fork and it is a valuable teaching strategy that does not require specific laboratory equipment.

Chitosan Functionalized with Carboxyl Groups as a Recyclable Biomaterial for the Adsorption of Cu (II) and Zn (II) Ions in Aqueous Media

2022

The modification of chitosan represents a challenging task in obtaining biopolymeric materials with enhanced removal capacity for heavy metals. In the present work, the adsorption characteristics of chitosan modified with carboxyl groups (CTS-CAA) towards copper (II) and zinc (II) ions have been tested. The efficacy of the synthesis of CTS-CAA has been evaluated by studying various properties of the modified chitosan. Specifically, the functionalized chitosan has been characterized by using several techniques, including thermal analyses (differential scanning calorimetry and thermogravimetry), spectroscopies (FT-IR, XRD), elemental analysis, and scanning electron microscopy. The kinetics an…

Core/Shell Gel Beads with Embedded Halloysite Nanotubes for Controlled Drug Release

2019

The use of nanocomposites based on biopolymers and nanoparticles for controlled drug release is an attractive notion. We used halloysite nanotubes that were promising candidates for the loading and release of active molecules due to their hollow cavity. Gel beads based on chitosan with uniformly dispersed halloysite nanotubes were obtained by a dropping method. Alginate was used to generate a coating layer over the hybrid gel beads. This proposed procedure succeeded in controlling the morphology at the mesoscale and it had a relevant effect on the release profile of the model drug from the nanotube cavity.

Chemical and pharmaceutical evaluation of the relationship between triazole linkers and pore size on cyclodextrin–calixarene nanosponges used as carr…

2016

Mixed cyclodextrin–calixarene nanosponges were used to prepare some composites with the well known polyphenolic bioactive compounds quercetin and silibinin. The composites were characterized by means of different techniques (UV-vis, FT-IR, microcalorimetry, thermogravimetry), in order to assess their loading and thermal stability. The kinetics of release of the bioactive molecules into aqueous solution were studied at two different pH values (1.0, 6.4), which mimic typical physiological conditions. Finally the possible antiproliferative effects in vitro were assayed towards three triple negative breast cancer cell lines (SUM 149, SUM 159 and MDA-MB-23). Our results point out the role assume…

Waterlogged archaeological wood: evaluation of consolidation treatments by calorimetry

2013

Palladium nanoparticles immobilized on halloysite nanotubes covered by a multilayer network for catalytic applications

2018

The synthesis of pure fine chemicals for industrial purposes is one of the most attractive challenges of chemical research. The use of catalytic pathways mediated by palladium nanoparticles (PdNPs) for C-C bond formation is a useful way to obtain these kinds of compounds. To achieve this objective, the PdNPs can be efficiently loaded on a functionalized natural nanostructured support such as halloysite nanotubes (HNTs). Hybrid materials based on thiol functionalized halloysite nanotubes and highly cross-linked imidazolium salts were successfully developed and used for the stabilization of PdNPs. The HNT/Pd hybrids were thoroughly characterized from a physico-chemical point of view and teste…

Halloysite nanotubes filled with salicylic acid and sodium diclofenac: effects of vacuum pumping on loading and release properties

2021

AbstractIn this work, we investigated the effects of the vacuum pumping on both the loading efficiencies and the release kinetics of halloysite nanotubes filled with drug molecules dissolved in ethanol. As model drugs, salicylic acid and sodium diclofenac were selected. For comparison, the loading of the drug molecules was conducted on platy kaolinite to explore the key role of the hollow tubular morphology on the filling mechanism of halloysite. The effects of the pressure conditions used in the loading protocol were interpreted and discussed on the basis of the thermodynamic results provided by Knudsen thermogravimetry, which demonstrated the ethanol confinement inside the halloysite cavi…

Halloysite nanotubes as sustainable nanofiller for paper consolidation and protection

2014

We investigated the filling process of cellulose-based paper with natural clay nanotubes and their mixtures with hydroxypropyl cellulose (HPC) that is commonly used as glue and consolidant for degraded paper. A comprehensive characterization of the materials was carried out through morphology, wettability, thermal degradation, and tensile properties. The treatment with halloysite nanotubes generated a decrease of the paper mechanical performance and did not alter the thermal properties. The co-presence of HPC and nanoparticles generated a more uniform nanotubes distribution in the paper fibrous structure and a significant enhancement of both the mechanical properties and the surface hydroph…

Composite films of natural clay nanotubes with cellulose and chitosan

2014

Composite films based on cellulose, chitosan and halloysite clay nanotubes were prepared using a solution casting method, which allowed for a uniform distribution of nanotubes within the material and provided control over the morphology of the composite. The mechanical performance of these bio nanocomposites is influenced by humidity and the nanotubes showed a plasticisation effect on the polymeric matrix. The composites of chitosan and halloysite nanotubes (HNTs), with modified hydrophobic inner lumens, resulted in a technique for controlled and sustainable surface cleaning. Lignocellulose wood microfibres modified with HNTs were also produced by a layer-by-layer assembly. The obtained ma…

Small Angle Neutron Scattering, X-ray Diffraction, Differential Scanning Calorimetry, and Thermogravimetry Studies to Characterize the Properties of …

2009

Nanocomposites based on laponite RD and (ethylene oxide)98(propylene oxide)67(ethylene oxide)98 (F127)triblock copolymer or poly(ethylene) glycol 2000 (PEG2000) were prepared by using the melting method. Small-angle neutron scattering and the X-ray diffraction experiments provided insights into the organization of the laponite RD dispersed in the macromolecular matrix over a wide length scale. SANS data analysis by means of a fractal law evidenced the formation of clusters of laponite RD at long correlation distance. The single laponite RD particles and the lamellar structure of F127 were described in the shorter length scale. Finally, the crystalline structure of the macromolecule was obse…

DSC AND TGA TO EVALUATE THE SELECTIVE IMPREGNATION OF WATERLOGGED ARCHAEOLOGICAL WOODS WITH POLY(ETHYLENE) GLYCOLS MIXTURES

2012

Within the cultural heritage field the wood conservation of waterlogged archaeological objects aims at preventing the collapsing of the wooden structure (upon drying) the degradation of which is related to the Taxon but also to the chemical and biological nature of the site. The refilling of the wood cavities with a consolidant, which confers robustness and stability, is an interesting strategy for the conservation methods of waterlogged archaeological objects. To this purpose, using different impregnation methods, waterlogged archaeological woods were consolidated by using aqueous mixtures of poly(ethylene) glycols with different molecular weights (PEG 400 and PEG 4000) as well as mixtures…

Solubilisation of Chlorinated oils in triblock copolymers-surfactant mixed aggregates

2006

1,2,3-Oligotriazoles modified halloysite nanotubes as potential active biological species: synthesis and characterization

2022

In the last years, the development of nano-formulations for cancer treatment represents one of the major challenges of the scientific research. The prodrug strategy, that combines chemotherapeutic agents with nanocarriers such as halloysite nanotubes (HNTs), is a promising strategy both to improve the biological activity of the drug molecules and to reduce the side effects of drugs. Herein we report the synthesis and characterization of a HNTs prodrug based on 1,2,3-triazole units covalently linked to HNTs external surface, bearing different positively charged moieties, which could present interesting pharmacological activities.

Heat Capacity Study to Evidence the Interactions between Cyclodextrin and Surfactant in the Monomeric and Micellized States

2003

The heat capacities of transfer (ΔCpt) of hydroxypropyl-α-cyclodextrin and hydroxypropyl-γ-cyclodextrin (0.05 mol kg-1) from water to aqueous solutions of sodium hexanoate, sodium decanoate, and so...

Effect of Morphology and Size of Halloysite Nanotubes on Functional Pectin Bionanocomposites for Food Packaging Applications

2017

Pectin bionanocomposite films filled with various concentrations of two different types of halloysite nanotubes were prepared and characterized in this study as potential films for food packaging applications. The two types of halloysite nanotubes were long and thin (patch) (200-30 000 nm length) and short and stubby (Matauri Bay) (50-3000 nm length) with different morphological, physical, and dispersibility properties. Both matrix (pectin) and reinforcer (halloysite nanotubes) used in this study are considered as biocompatible, natural, and low-cost materials. Various characterization tests including Fourier transform infrared spectroscopy, field emission scanning electron microscopy, rele…

Adsorption Studies of Molecules on the Halloysite Surfaces: A Computational and Experimental Investigation

2017

We report the results of joint computational and experimental investigations on the adsorption capability of halloysite toward a set of common molecules (water, alcohols, halides, and carboxylic acids). The halloysite system has been modelized by means of a cluster approach choosing a portion of a spiral nanotube; it has a slight curvature, with a convex aluminic layer. The adsorption geometries are described in terms of hydrogen bond network structures; calculated interaction energies invariably indicate that the inner aluminic surface is the place for preferential adsorption of polar molecules. The presence of substitutional defects on the outer or inner surface of the halloysite model ca…

Clay nanotubes for paper consolidation

2014

SYNTHESIS AND EVALUATION OF CATALYTIC ACTIVITY IN WATER AND MICROWAVE IRRADIATION OF A NEW SUPPORT BASED ON HNT TRIAZOLIUM SALTS

2014

In the last years SILLP (supported ionic liquid-like phase)-based materials prepared by covalent attachment have been synthesized [1]. Recently, we have synthesized a palladium-based catalytic system using halloysite nanotubes modified with octylimidazolium moieties and we have tested it in the Suzuki cross-coupling reaction under traditional heating, microwave irradiation and a very small amount of Pd catalyst [2,3]. It is known that support based on triazole motif showed superior activity to the analogous imidazole molecules [4] so, we have focused our attention to develop a new SILLP system with triazolium moiety. Herein we report the synthesis of an original Pd-dicationic triazolium sup…

Supramolecular Association of Halochromic Switches and Halloysite Nanotubes in Fluorescent Nanoprobes for Tumor Detection

2022

Fluorescence imaging has become an indispensable tool in the biomedical laboratory to elucidate the fundamental dynamic and structural factors regulating cellular processes. The development of fluorescent nanoprobes represents a challenge to detect any cellular process under a microscope. Herein, a fluorescent nanomaterial was synthesized by exploiting the supramolecular interaction between a halochromic switch (1Cl) and halloysite nanotubes (HNTs). The successful synthesis of a HNTs/1Cl nanomaterial was confirmed by thermogravimetric analysis and Fourier transform infrared. The aqueous mobility was investigated by dynamic light scattering and ζ-potential measurements as well. Furthermore, …

Hand-made paper obtained by green procedure of cladode waste of Opuntia ficus indica (L.) Mill. from Sicily

2019

Cellulosic fibres have been obtained by green procedures from the cladodes of Opuntia ficus indica (L.) Mill., constituting a large agro industrial waste in our territory. The materials have been analysed for its relative composition, applying, IR and TG methodologies and it was characterised by the absence of lignin. The fibrous material allowed the manufacture of a handmade paper obtaining an ecological material suitable for packaging purposes. The authors evidenced that the simple protocol based on hot water treatment was able to decrease the amount of hemicellulose in the final material.

Synergistic Activity of Silver Nanoparticles and Polyaminocyclodextrins in Nanosponge Architectures

2019

Four new composite materials, formed by silver nanoparticles embedded in polyamino-cyclodextrin nanosponge architectures, were designed exploiting the affinity of polyamino-cyclodextrins towards Ag+ ions. These materials were characterized by means of different techniques (thermogravimetry, FT-IR, solid state NMR, SEM, HR-TEM), and tested as catalysts for the reduction of nitroarenes and the oxidative coupling of anilines. The results obtained showed synergistic activity between the supramolecular binding abilities of the nanosponge matrix and the catalytic properties of the metal nanoparticle, and open the way towards the design of new composite smart nanomaterials with improved catalytic …

Bionanocomposites based on pectins and halloysite nanotubes

2011

Photoluminescent hybrid nanomaterials from modified halloysite nanotubes

2018

The synthesis of photoluminescent nanomaterials based on halloysite nanotubes is described. The obtained hybrid was characterized by means of TGA, FT-IR, DLS and XPS measurements; in addition its morphology was imaged by TEM and HR-TEM. The HNT hybrid also exhibited photoluminescent properties, both in solution and in the solid state, and white-light emission (0.24, 0.36; CIE coordinates) was observed. This work could be pioneering as a new strategy for manufacturing both LEDs and fluorescent tags based on HNT nanomaterials. © 2018 The Royal Society of Chemistry.

Steric stabilization of modified nanoclays triggered by temperature.

2015

Halloysite clay nanotubes were modified through the adsorption of poly(N-isopropylacrylamide)-amine terminated (PNIPA-NH2) onto the external surface by exploiting electrostatic interactions at pH=6. In spite the amount of attached polymer is rather low (1 wt%), the properties of the nanotubes are deeply modified. The apparent specific volume and isentropic compressibilities of the hybrid nanomaterial dispersed in water evidenced the transferring of the termosensitive property from the polymer to halloysite. The hydrodynamic radius as well as the ζ-potential of the nanohybrid are consistent with the attachment of a positively charged polymer onto the negative surface of the nanotube. The col…

GLYCOCLUSTER A BASE DI NANOTUBI DI ALLOSITE COME DRUG DELIVERY SYSTEM

2014

Le interazioni carboidrati–lectine giocano un ruolo fondamentale in diversi processi biologici come ad esempio nelle infiammazioni, embriogenesi, sviluppo cellulare, etc..1 Sebbene l’interazione tra lectine e carboidrati sia un’interazione debole, la possibilità di instaurare contemporaneamente interazioni multiple tra differenti unità di lectine e differenti unità di carboidrati ne aumenta l’efficienza e la selettività.2 Nella presente comunicazione si riporta la sintesi di nuovi glicocluster basati su nanotubi di allosite, a cui sono state chimicamente legate unità ciclodestriniche che presentano sul bordo largo unità zuccherine quali galattosio, mannosio e lattosio. I materiali ottenuti …

Nanohydrogel Formation within the Halloysite Lumen for Triggered and Sustained Release

2018

An easy strategy to obtain nanohydrogels within the halloysite nanotube (HNTs) lumen was investigated. Inorganic reverse micelles based on HNTs and hexadecyltrimethylammonium bromides were dispersed in chloroform, and the hydrophilic cavity was used as a nanoreactor to confine the gel formation based on alginate cross-linked by calcium ions. Spectroscopy and electron microscopy experiments proved the confinement of the polymer into the HNT lumen and the formation of calcium-mediated networks. Biological tests proved the biocompatibility of the hybrid hydrogel. The nanogel in HNTs was suitable for drug loading and sustained release with the opportunity of triggered burst release by chemical …

Polyethylene glycol/clay nanotubes composites

2012

Nanocomposites of poly(ethylene) glycol (PEG) 20000 filled with clay nanotubes (HNTs) were prepared. The thermal properties obtained from thermogravimetry and differential scanning calorimetry were correlated to the morphology imaged by scanning electron microscopy. Low amounts of HNTs generate compact structure while large amounts of HNTs create craters and voids. The decrease of polymer degradation temperature in the presence of large amount of nanoclay (ca. 80 wt%) is a consequence of the morphology at the mesoscale range. The thermal opposite effect observed in the HNTs low regime (up to ca. 20 wt%) is due to the gas entrapment into the nanoparticles lumen. The quantitative analysis of …

Nanocomposite based on Multi-Macrocyclic Receptors and Halloysite for Volatile Organic Compounds Capture

2015

Volatile organic compounds (VOCs) are chemicals released to the atmosphere by natural and anthropogenic sources. VOCs are hazardous air pollutants and promote formation of photochemical smog. Variety of chemicals released from pharmaceutical industry includes priority pollutants like benzene, toluene, and dichloromethane. The aim of this work was at designing, preparing and characterizing from the physico-chemical view-point a pseudo nano-sponge with low environmental impact for pollutant removal. As adsorbent material, a nanocomposite based on nanoclay and cucurbiturils, which are biocompatible materials, were investigated. Clay minerals (e.g. montmorillonite and kaolin) are important comp…

Editorial: Advanced Functional Materials Derived From One-Dimensional Clay Minerals

2021

Thermal methods to evaluate consolidation of artworks

2014

SYNTHESIS AND CHARACTERIZATION OF POSITIVELY CHARGED FUNCTIONALIZED HALLOYSITE/CURCUMIN SYSTEMS AND EVALUATION OF THEIR ANTICANCER ACTIVITY

2014

Phenolic compound originated from one of the main class of secondary metabolites, as curcumin and its derivatives have been studied and their biological and pharmacological activities have been evaluated, too [1,2]. Unfortunately, curcumin exhibits poor bioavailability after oral or topic administration [3]. Therefore a carefully designed carrier could significantly facilitate curcumin delivery and broaden the range of its possible pharmaceutical applications. Halloysite was found to be a viable and inexpensive nanoscale container for the encapsulation of biological active molecules [4]. In this communication we report data about a new potential curcumin carrier based on positively charged …

Synthesis, characterization and study of covalently modified triazole LAPONITE® edges

2020

Abstract LAPONITE® (Lap) clay mineral was successful functionalized by triazole groups in a two steps procedure. First, the Lap edges were modified with 3-azidopropyltrimethoxysilane by traditional heating and microwave irradiation. Microwave irradiation allowed us to obtain high loading onto the Lap edges in lower times compared to those obtained through conventional method. Afterwards, the triazole moieties were obtained by reaction between azido functionalized Lap and propargyl alcohol. The successful functionalization of Lap was proved by thermogravimetric analysis, FT-IR spectroscopy, dynamic light scattering and ζ-potential measurements. Finally, the effects of the surface modificatio…

Functionalized halloysite nanotubes for enhanced removal of lead(II) ions from aqueous solutions

2018

In this study, environmental friendly halloysite nanotubes and their amino derivatives were used as adsorbent materials for lead(II) ions. The adsorption ability of both nanomaterials towards Pb2+ ions has been studied in NaClaq, at I = 0.1 mol L−1, in the pH range 3–6. Moreover, the effect of ionic strength on the adsorption process was evaluated at the pH of maximum efficiency of the adsorbent materials. Kinetic and equilibrium experiments were carried out by using the Differential Pulse Anodic Stripping Voltammetry (DP-ASV) technique to check the metal ion concentration in solution after contact with the two adsorbents. Different isotherm and kinetic equations were used to fit the experi…

Clay nanotubes/ionic surfactant: Smart hybrid nanomaterials for the solubilization of hydrophobic compounds in aqueous media

2013

Nanoclays for Conservation

2019

Within the conservation of artworks materials, this chapter describes innovative strategies based on clay nanoparticles that are promising for protective coating, surface cleaning, and consolidation. We present the preparation of polymer/montmorillonite nanocomposites, which are revealed as efficient protective coatings for highly porous stones, marbles, and bread-made artifacts. Anticorrosive films for metal substrates have been obtained by polymer filling with laponite and halloysite nanotubes (HNTs) containing corrosion inhibitors into their lumen. The dispersion of hydrophobically modified HNTs into chitosan matrix drives to fabricate biofilms with surface cleaning capacity. Rust stains…

Selective Antimicrobial Effects of Curcumin@Halloysite Nanoformulation: A Caenorhabditis elegans Study

2019

Alterations in the normal gastrointestinal microbial community caused by unhealthy diet, environmental factors, and antibiotic overuse may severely affect human health and well-being. Novel antimicrobial drug formulations targeting pathogenic microflora while not affecting or even supporting symbiotic microflora are urgently needed. Here we report fabrication of a novel antimicrobial nanocontainer based on halloysite nanotubes loaded with curcumin and protected with a dextrin outer layer (HNTs+Curc/DX) and its effective use to suppress the overgrowth of pathogenic bacteria in Caenorhabditis elegans nematodes. Nanocontainers have been obtained using vacuum-facilitated loading of hydrophobic …

Aqueous block copolymer-surfactant mixtures and their ability in solubilizing chlorinated organic compounds. A thermodynamic and SANS study.

2006

Within the topic of surfactant enhanced solubilization of additives sparingly soluble in water, volumetric, solubility, conductivity, and small-angle neutron scattering (SANS) experiments on mixtures composed of alpha,omega-dichloroalkane, surfactant, copolymer, and water were carried out at 298 K. The triblock copolymers (ethylene oxide)132(propylene oxide)50(ethylene oxide)132 (F108) and (ethylene oxide)76(propylene oxide)29(ethylene oxide)76 (F68) were chosen to investigate the role of the molecular weight keeping constant the hydrophilic/hydrophobic ratio. The selected surfactants are sodium decanoate (NaDec) and decyltrimethylammonium bromide (DeTAB) with comparable hydrophobicity and …

Thermodynamics of Proton Binding of Halloysite Nanotubes

2016

In this paper, new information on physical and chemical properties of the widely used nanostructured Halloysite mineral are reported. Given that the Halloysite has a tubular structure formed by a variable number of wrapped layers containing Si-OH and Al-OH groups, their proton binding affinity was measured at different ionic strengths and ionic media by means of potentiometric measurements in heterogeneous phase. One protonation constant for the Si-OH groups and two for the Al-OH groups were determined. The protonation constant values increase with increasing of the ionic strength in all the ionic media. This suggests that the presence of a background electrolyte stabilizes the protonated s…

Halloysite Nanotubes Coated by Chitosan for the Controlled Release of Khellin

2020

In this work, we have developed a novel strategy to prepare hybrid nanostructures with controlled release properties towards khellin by exploiting the electrostatic interactions between chitosan and halloysite nanotubes (HNT). Firstly, khellin was loaded into the HNT lumen by the vacuum-assisted procedure. The drug confinement within the halloysite cavity has been proved by water contact angle experiments on the HNT/khellin tablets. Therefore, the loaded nanotubes were coated with chitosan as a consequence of the attractions between the cationic biopolymer and the halloysite outer surface, which is negatively charged in a wide pH range. The effect of the ionic strength of the aqueous medium…

Improvement of oxidation resistance of polymer-based nanocomposites through sonication of carbonaceous nanoparticles

2020

Abstract The work aim is focused on two different aspects: first, the investigation of the effect of extended ultra-sound-assisted treatment (us) of carbonaceous nanoparticles, such as carbon nanotubes (CNTs) and carbon black (CB), on their radical scavenging activity, and second, the investigation of the oxidative resistance of polymer-based nanocomposites, containing us-treated CNTs and CB. Particularly, the CNTs and CB have been subjected to us sonication for different time intervals and the performed analysis reveals that both kinds of nanoparticles show decreased average hydrodynamic diameters and large content of surface defects. Really, the increased content of CNTs and CB defects, a…

Hydroxypropyl Cellulose Films Filled with Halloysite Nanotubes/Wax Hybrid Microspheres

2021

The design of novel nanocomposite films based on hydroxypropyl cellulose (HPC) and wax/halloysite hybrid microspheres has been reported. In particular, we first prepared wax/clay Pickering emulsions which were characterized by thermogravimetric analysis and microscopy. SEM images allowed more detailed insights on the nanotubes disposition at the wax/water interface, acting as an outer stabilizing shell. Therefore, the cellulosic biopolymer was added, and it was found that HPC enhances the colloidal stability of the particles, preventing their coalescence and sedimentation. The preparation of the composite films was carried out by the solvent casting method, which enabled the development of …

Emulsions based on fatty acid from vegetable oils for cosmetics

2022

Vegetable oils are sources of saturated, monounsaturated and polyunsaturated fatty acids. In this work, we studied the suitability of a mixture of vegetable oils and some fatty acids (similar to the those of the human skin) as a cosmetic emulsion. Hypericum (Hypericum perforatum L.) – 1 %, thistle (Silybum marianum (L.) Gaertn.) – 42 %, linen (Línum usitatíssimum L.) – 1.1 %, wheat germ (Triticum aestivum L.) – 1 %, sesame (Sésamum índicum L.) – 1 %, mustard (Sinápis álba L.) – 2%, pumpkin (Cucúrbita p é po L.) – 5 %, – were selected as vegetable oils. The emulsion based on the proposed mixture of vegetable oils has a higher antioxidant activity (1.623 OD) compared with that based on minera…

Clay nanotubes for designing eco-compatible smart materials

2013

Beeswax/halloysite microparticles embedded within a geopolymeric layer for the protective coating of steel

2023

A halloysite-based geopolymer filled with microwax particles was designed as a protective layer on steel substrates. Beeswax microparticles were obtained from the clay stabilized Pickering emulsions and they were homogeneously dispersed within the geopolymeric network, thus improving the coating physico-chemical properties. Specifically, this treatment changed the steel's wettability by increasing its hydrophobicity. Moreover, XRF analysis was conducted in order to have details on the chemical compositions.

Structure of Hybrid Materials Based on Halloysite Nanotubes Filled with Anionic Surfactants

2016

The structures of pristine halloysite nanotubes (HNTs) and ones functionalized by anionic surfactants (sodium dodecanoate and sodium dodecyl sulfate) were investigated by small angle neutron scattering (SANS). These experiments evidenced the structural organization of the surfactants adsorbed onto the HNT cavity and the importance of the surfactant headgroup. Contrast matching experiments were employed in order to mask the dominant scattering effect of the clay hollow nanotubes and to focus on the surfactant organization within the lumen. Further investigation on the mesoscopic structure of the investigated materials was carried out by electric birefringence (EBR), which allowed study of th…

Organic-nanoclay composite materials as removal agents for environmental decontamination

2019

Here we overview the recent advances in the fabrication of sustainable composite nanomaterials with decontamination capacity towards inorganic and organic pollutants. In this regards, we present the development of hybrid systems based on clay nanoparticles with different shapes (such as kaolinite nanosheets and halloysite nanotubes) and organic molecules (biopolymers, surfactants, cucurbituril) as efficient removal agents for both aliphatic and aromatic hydrocarbons. Due to their high specific surface area, clay nanoparticles have been successfully employed as fillers for composite membranes with excellent filtration capacity. The preparation of composite gel beads based on biopolymers (alg…

On the effect of the nature of counterions on the self-assembly of polyoxyethylene alkyl ether carboxylic acids

2020

In this contribution, we investigate the effect of the type of counterion on the properties of dilute solutions of polyoxyethylene alkyl ether carboxylic acids. Two different surfactants, presenting an oleic acid alkyl chain and on-average five and nine ethylene oxide units, and terminated by a weakly anionic carboxymethyl group were studied. The surfactants were gradually ionized with sodium hydroxide, arginine, and choline hydroxide. The solutions properties were probed by light scattering, electrophoretic mobility, density and sound velocity measurements, as well as by small-angle neutron scattering. To our initial surprise, no specific effect arising from the nature of the counterion co…

Multicomponent bionanocomposites based on clay nanoarchitectures for electrochemical devices

2019

[EN] Based on the unique ability of defibrillated sepiolite (SEP) to form stable and homogeneous colloidal dispersions of diverse types of nanoparticles in aqueous media under ultrasonication, multicomponent conductive nanoarchitectured materials integrating halloysite nanotubes (HNTs), graphene nanoplatelets (GNPs) and chitosan (CHI) have been developed. The resulting nanohybrid suspensions could be easily formed into films or foams, where each individual component plays a critical role in the biocomposite: HNTs act as nanocontainers for bioactive species, GNPs provide electrical conductivity (enhanced by doping with MWCNTs) and, the CHI polymer matrix introduces mechanical and membrane pr…

The Use of Some Clay Minerals as Natural Resources for Drug Carrier Applications

2018

The goal of modern research is to use environmentally preferable materials. In this context, clay minerals are emerging candidates for their bio- and ecocompatibility, low cost and natural availability. Clay minerals present different morphologies according to their layer arrangements. The use of clay minerals, especially in biomedical applications is known from ancient times and they are regaining attention in recent years. The most representative clay minerals are kaolinit, montmorillonite, sepiolites and halloysite. This review summarizes some clay minerals and their derivatives for application as nanocontainer for biologically active species.

Bionanocomposites Based on Pectins and Halloysite Nanotubes: from the Structure to the Properties

2010

Restoration of a XVII Century’s predella reliquary: From Physico-Chemical Characterization to the Conservation Process

2021

We report on the restoration of a XVII century’s predella reliquary, which is a part of a larger setup that includes a wall reliquary and a wooden crucified Christ, both belonging to the church of “Madre Maria SS. Assunta”, in Polizzi Generosa, Sicily, Italy. The historical/artistic and paleographic research was flanked successfully by the scientific objective characterization of the materials. The scientific approach was relevant in the definition of the steps for the restoration of the artefact. The optical microscopy was used for the identification of the wood species. Electron microscopy and elemental mapping by energy-dispersive X-ray (EDX) was successful in the identification of the l…

Temperature-responsive hybrid nanomaterials based on modified halloysite nanotubes uploaded with silver nanoparticles

2022

New temperature-responsive hybrid nanomaterials based on modified halloysite nanotubes (HNTs) containing grafted polymer brushes with silver nanoparticles have been successfully fabricated. We used a three steps process including synthesis of the initiating coatings onto HNTs surface, fabrication of the POEGMA – poly(oligo(ethylene glycol)ethyl ether methacrylate) grafted brushes and synthesis of the silver nanoparticles (AgNPs). The synthesis and properties of hybrid nanomaterials were studied by FT-IR, TGA and DLS methods. It is shown that the introduction of AgNPs, formed from 0.005 M AgNO3 solution leads to a significant reduction of low critical solution temperature (LCST) of the polym…

Oil solubilization in copolymer and copolymer covered laponite aqueous dispersion

2007

Halloysite nanotubes loaded with peppermint essential oil as filler for functional biopolymer film

2016

Abstract The purpose of this paper is to show how a functional bionanocomposite film with both antioxidant and antimicrobial activities was successfully prepared by the filling of a pectin matrix with modified Halloysite nanotubes (HNT) containing the essential peppermint oil (PO). Firstly, HNT surfaces were functionalized with cucurbit[6]uril (CB[6]) molecules with the aim to enhance the affinity of the nanofiller towards PO, which was estimated by means of HPLC experiments. The HNT/CB[6] hybrid was characterized by several methods (thermogravimetry, FT-IR spectroscopy and scanning electron microscopy) highlighting the influence of the supramolecular interactions on the composition, therma…

ChemInform Abstract: Eco-Friendly Functionalization of Natural Halloysite Clay Nanotube with Ionic Liquids by Microwave Irradiation for Suzuki Coupli…

2014

Abstract Microwave assisted halloysite (HNT) external surface functionalization with ionic liquids is described. HNTs modification was achieved in two steps: a) grafting of 3-mercaptopropyl trimethoxysilane on the external surface of HNT by a microwave irradiation; b) anchorage of vinylimidazolium ionic liquids by a thiol-ene reaction. MW irradiation allowed us to obtain high loading onto the HNT surface compared to those obtained through conventional synthesis. Fourier transform infrared spectroscopy and thermogravimetric analysis confirmed that the grafting has occurred only on the external surface of HNT. Turbidimetric and dynamic light scattering analyses showed that the introduction of…

A computational and experimental investigation of halloysite silicic surface modifications after alkaline treatment

2023

Density functional theory calculations were performed in order to investigate the formation of silanol groups on the outer surface of halloysite nanotubes, as possible products of the reactions with water in alkaline environments. The results, discussed in terms of energy release and structural properties of the modified surface, suggest that the formation of various kinds of silanol group constellations, and even the extraction of orthosilicic acid, are highly exothermic reaction in the presence of hydroxide ions. Thermogravimetric analysis, FT-IR, XRD and X-ray fluorescence spectrometry performed on halloysite treated at high pH conditions indicate that the adsorption of water on the oute…

Halloysite nanotubes-based nanocomposites for the hydrophobization of hydraulic mortar

2021

Abstract The treatment of stone surfaces for their protection from ageing caused by natural and anthropogenic effects is an open issue in materials development for Cultural Heritage. We thought interesting to verify the suitability of a modified cellulose biofilm filled with halloysite nanotubes as wax compatibilizers to design a protecting layer. A hydraulic mortar was selected as a stone prototype. To improve the physico-chemical properties of the covering layer, wax microparticles have been incorporated to control transport, consolidation and wettability features. In particular, different application protocols have been studied, namely brushing and spraying, to assess whether the propos…

Aggregation processes of perylene bisimide diimidazolium salts

2015

The supramolecular aggregation of three diimidazolium- functionalized perylene bisimides, differing in the alkyl chain length was investigated. These salts form aggregates in solvents like chloroform, dichloromethane, and glycerol. Solvent-, concentration-, and temperature-dependent spectroscopic studies were carried out, evidencing the occurrence of an isodesmic, enthalpy-driven aggregation process, underpinned by p–p stacking and hydrogen bonding. Moreover, dynamic light scattering (DLS) measurements and SEM images revealed that these salts aggregate in chloroform into elongated structures.

Solution and thermal behaviour of novel dicationic imidazolium ionic liquids

2013

A new class of functionalised dicationic ionic liquids, containing a central cationic unit capped by a basic functionality (imidazole), has been synthesised. These salts have been characterised in isotropic solution using proton and 2D-NMR spectroscopy, and their thermal stability has been studied by DSC and TGA. All these novel salts contain the 1-(1-imidazolylmethyl)-3,5-di{1-(3'-octylimidazolylmethyl)}-benzene cation as a defining structural motif. Salts of both singly and doubly charged anions were prepared and, in particular, the selected monoanions (Br(-), [BF4](-), or [NTf2](-)) differ in size, shape and hydrogen-bonding ability, whereas the dianions differ in the nature of the space…

Pd supported on magnetic carbon coated halloysite as hydrogenation catalyst: Study of the contribution of carbon layer and magnetization to the catal…

2019

Abstract In this article, a magnetic carbon-coated halloysite nanoclay (Hal) was prepared through introduction of hydrothermally carbonized glucose (Glu) on Hal followed by the immobilization of magnetic nanoparticles (MNPs) and incorporation of resorcinol-formaldehyde polymeric shell (RF) and carbonization. The resulting composite was then successfully applied for the immobilization of Pd nanoparticles to afford Pd@Hal@Glu-Fe-C that could efficiently promote hydrogenation of nitroarenes in the aqueous media at low temperature. The catalyst exhibited high selectivity toward nitro group. Moreover, it was highly recyclable with low MNPs and Pd leaching. To elucidate the contribution of each c…

Lifetime predictions of non-ionic and ionic biopolymers: kinetic studies by non-isothermal thermogravimetric analysis

2021

AbstractIn this paper, films based on sustainable polymers with variable charge have been investigated by non-isothermal thermogravimetry in order to predict their lifetime, which is a key parameter for their potential use in numerous technological and biomedical applications. Specifically, chitosan has been selected as positively charged biopolymer, while alginate has been chosen as negatively charged biopolymer. Among non-ionic polymers, methylcellulose has been investigated. Thermogravimetric measurements at variable heating rates (5, 10, 15 and 20 °C min−1) have been performed for all the polymers to study their degradation kinetics by using isoconversional procedures combined with ‘Mas…

Solubilization of an Organic Solute in Aqueous Solutions of Unimeric Block Copolymers and Their Mixtures with Monomeric Surfactant: Volume, Surface T…

2008

The ability of aqueous systems, formed by unimeric copolymers and their mixtures with a monomeric surfactant, in solubilizing large quantities of 1-nitropropane (PrNO2) was explored. The copolymers are F68 and L64, which differ for the hydrophilicity, and the surfactant is sodium dodecanoate. For a better understanding of the mechanism of solubilization, thermodynamic (volume and differential scanning calorimetry), spectroscopy (steady-state fluorescence), viscosity, and interfacial investigations were carried out. PrNO2 causes the micellization of the unimeric copolymer, and the required amount of PrNO2 depends on the composition, the copolymer nature, and the temperature. Large quantities…

Colloidal stability of halloysite clay nanotubes

2019

Abstract The colloidal stability of halloysite clay nanotubes dispersion is reviewed showing the strategy and the mechanism to obtain stable systems in water and apolar solvents. The selective modification of halloysite inner/outer surfaces can be achieved by exploiting electrostatic interactions. The adsorption of anionic surfactants onto the halloysite cavity allows generating inorganic cylindrical micelles that can be separated from the solvent. On the other hand, the functionalization of halloysite shell by positively charged surfactants drives to obtain stable water-in-oil emulsions. The interactions with ionic and nonionic polymers alters the dispersability of halloysite due to electr…

Halloysite nanotubes as support for metal-based catalysts

2017

Halloysite nanotubes (HNTs) are clay minerals with a hollow nanotubular structure. There is growing interest in these nanomaterials, due to their biocompatibility, potential applications and availability. The surface chemistry of HNTs is versatile for the targeted chemical modification of the inner lumen and outer surface. Functionalized halloysite constitutes a valuable support for metal nanoparticles, promoting catalytic applications with tunable properties. The peculiar tubular shape of HNTs favors the dispersion and surface availability of the supported metal nanoparticles that are active in the catalytic path. Moreover, the presence of an empty lumen opens new perspectives for the prod…

Microemulsion encapsulated into halloysite nanotubes and their applications for cleaning of a marble surface

2018

Halloysite nanotubes were used to incorporate anionic surfactant micelles and an organic solvent to generate a cleaning system to be applied in Cultural Heritage restoration. The targeted adsorption is driven by electrostatic interactions based on the nanotubes peculiar charge separation. Namely anionic species are driven to the positively charged inner surface while being prevented from interacting with the halloysite outer surface that possesses a positive charge density. The hybrid organic/inorganic emulsion was characterized by dynamic light scattering. Analysis of the autocorrelation function allowed us to define the presence of surfactant aggregates inside/outside the nanotube lumen a…

Materiali ibridi a base di nanotubi di allosite per la rimozione d’inquinanti

2017

L’allosite (HNT) è un interessante materiale argilloso allumino-silicato naturale, non tossico e biocompatibile, con la caratteristica forma tubolare cava dotata di parziale carica positiva interna e negativa esterna.Combinando le peculiarità di un composto organico con le proprietà di un materiale inorganico, è possibile ottenere sistemi ibridi organici–inorganici con interessanti proprietà e vasti campi di applicazione. Sono un esempio delle “nanospugne” capaci di adsorbire efficacemente potenziali inquinanti. In questo contesto sono stati preparati, dei materiali ibridi “spugna” costituiti da unità ciclodestriniche e allosite e ancora un sistema ibrido HNT-Cucurbit[8]uril. Il primo possi…

Halloysite based material for enhanced solubilization

2014

HALLOYSITE NANOTUBES AS SUPPORT FOR METAL NANOPARTICLES FOR CATALYTIC APPLICATION

2017

Halloysite (HNT) is a natural clay that, in the last years, has shown an important increasing on various applications in different field of interesting. Chemically similar to kaolin, it shows the predominately rolled shape, to form multilayers tubes of nanometric dimensions. The different chemical composition of the inside lumen (Al-OH) surface and outside (Si-O) give to the tubes a partial negative charge outside and positive inside. In this way, it is possible to get different interactions of different molecules or systems selectivity on one or another surface. The selective functionalization, covalent or not, of the HNT lumen or outer surface, gives the possibility to the nanotubes to fu…

Functional biohybrid materials based on halloysite, sepiolite and cellulose nanofibers for health applications

2019

Biohybrid materials were prepared by co-assembling the three following components: nanotubular halloysite, microfibrous sepiolite, and cellulose nanofibers dispersed in water, in order to exploit the most salient features of each individual component and to render homogeneous, flexible, yet strong films. Indeed, the incorporation of halloysite improves the mechanical performance of the resulting hybrid nanopapers and the assembly of the three components modifies the surface features concerning wetting properties compared to pristine materials, so that the main characteristics of the resulting materials become tunable with regard to certain properties. Owing to their hierarchical porosity to…

Facile Fabrication of Natural Polyelectrolyte-Nanoclay Composites: Halloysite Nanotubes, Nucleotides and DNA Study

2020

Complexation of biopolymers with halloysite nanotubes (HNTs) can greatly affect their applicability as materials building blocks. Here we have performed a systematic investigation of fabrication of halloysite nanotubes complexes with nucleotides and genomic DNA. The binding of DNA and various nucleotide species (polyAU, UMP Na2, ADP Na3, dATP Na, AMP, uridine, ATP Mg) by halloysite nanotubes was tested using UV-spectroscopy. The study revealed that binding of different nucleotides to the nanoclay varied but was low both in the presence and absence of MgCl2, while MgCl2 facilitated significantly the binding of longer molecules such as DNA and polyAU. Modification of the nanotubes with DNA an…

Clay Nanotube/Perfluorinated Surfactant Hybrid Materials

2013

Magnetic coiffure: Engineering of human hair surfaces with polyelectrolyte-stabilised magnetite nanoparticles

2022

Here we report a spontaneous electrostatic coating of human hair with aqueous Fe3O4 colloids capable to tailor magnetic properties to hair, orienting and even moving them under the influence of the external magnetic field. Magnetite particles were modified by cationic and anionic polyelectrolytes and then successfully deposited in dense arrays, starting from cuticle gaps and spreading further over a major hair surface. These biocompatible and biodegradable magnetic nanoparticles may serve as carriers for drug loading and delivery for topical pharmaceutical treatments. The deposition process was imaged in real-time using dark-field microscopy. The hair specimens were further studied using a …

Hydrophobically Modified Halloysite Nanotubes as Reverse Micelles for Water-in-Oil Emulsion.

2015

An easy strategy to obtain inorganic reverse micelles based on halloysite nanotubes (HNTs) and alkyltrimethylammonium bromides has been developed. The selective modification of the HNTs external surface with cationic surfactants endows to generate tubular nanostructures with a hydrophobic shell and a hydrophilic cavity. The influence of the surfactants alkyl chain on the HNTs functionalization degree has been investigated. The dynamic behavior of the surfactant/HNT hybrids in solvents with variable polarity has been correlated to their affinity toward hydrophobic media explored through partition experiments. The water-in-oil emulsion is able to solubilize copper sulfate, proving the incorpo…

Mesoporous inorganic nanoscale particles for drug adsorption and controlled release.

2018

The review provides an overview of the mesoporous inorganic particles employed as drug delivery systems for controlled and sustained release of drugs. We have classified promising nanomaterials for drug delivery on the basis of their natural or synthetic origin. Nanoclays are available in different morphologies (nanotubes, nanoplates and nanofibers) and they are typically available at low cost from natural resources. The surface chemistry of nanoclays is versatile for targeted modifications to control loading and release properties. Synthetic nanomaterials (imogolite, laponite and mesoporous silica) present the advantages of well-established purity and availability with size features that …

Selective functionalization of halloysite cavity by click reaction: structured filler for enhancing mechanical properties of bionanocomposite films

2014

Selective modification of the inner surface of halloysite nanotubes (HNTs) by the cycloaddition of azides and alkynes (click reaction) was successfully achieved. Fourier transform infrared spectroscopy and thermogravimetry confirmed that the modification involved only the HNT cavity. Morphological investigations evidenced that the functionalized nanotubes formed microfibers and clusters in the micrometer range. By means of the casting method, these nanomaterials were dispersed into biopolymeric matrixes (chitosan and hydroxypropyl cellulose) with the aim of obtaining nanocomposite films with tunable properties from the physicochemical viewpoint. For comparison purposes, we also characterize…

BIONANOCOMPOSITES BASED ON NATURAL POLYMERS AND NANOCLAYS. AN EXTENDED PHYSICO-CHEMICAL STUDY TO EVIDENCE THE ROLE OF THE POLYMER NATURE AND THE NANO…

2011

Effect of different processing techniques and presence of antioxidant on the chitosan film performance

2022

In the last two decades, the naturally occurring polysaccharides have gained great attention because of their potential applications in different sectors, for example, from food to biomedical sectors. Chitosan is a cationic polysaccharide with good transparency, and currently, it has been considered also as suitable material for the formulation film and coating in cultural heritage protection. In this work, the chitosan films (Ch), with and without natural antioxidant such as citric acid (CA), are formulated considering two different processing techniques: (i) conventional solvent casting and (ii) compression molding, that is an unconventional method for this polysaccharide, giving the poss…

Copolymers sensitive to temperature and pH in water and in water+oil mixtures: A DSC, ITC and volumetric study

2011

Block copolymer micelles are receiving an increasing interest because of the variety of structures and the possibilities to tune them by changing external and internal parameters achieving the desired properties for a specific purpose. We have investigated the acid/base behavior, self-assembling and solubilization ability towards polar oils of star-like copolymers named Tetronics. They are composed of branched four-arms each one consisting of two blocks made of EO and PO units linked to the diethylenediamine group, which confers pH response ability. The copolymers T1107 and T90R4 were studied with a sequential and reverse architecture. The thermodynamics of the acid/base equilibrium was stu…

Polystyrene nanoparticles in the presence of (ethylene oxide)13(propylene oxide)30(ethylene oxide)13, N,N-dimethyloctylamine-N-oxide and their mixtur…

2008

Polystyrene nanoparticles were synthesized by emulsion polymerization of styrene. They were functionalized using the conventional surfactant N,N-dimethyloctylamine-N-oxide (ODAO), the tri-block copolymer (ethylene oxide)13(propylene oxide)30(ethylene oxide)13 (L64) and their mixtures. To this purpose, dynamic light scattering and calorimetric experiments were carried out and provided information consistent to each other. The L64 adsorption is Langmuir-type in the copolymer dilute regime and generates complex structures at larger concentrations. In the region where ODAO is in the unimeric state, the adsorption process is cooperative leading to hemi-micelle formation at the polystyrene nanopa…

Mass Action Model Applied to the Thermodynamic Properties of Transfer of Nonionic Copolymers from Water to the Aqueous Surfactant Solutions

2003

A thermodynamic model which enables the properties of aqueous copolymer/surfactant mixtures to be fit quantitatively was proposed. Namely, a relationship between the properties of transfer of the unassociated copolymer from water to the aqueous surfactant solutions (DeltaY(t)) and the surfactant concentration was derived. The model was based on the idea that AY, can be expressed in terms of the following contributions: (1) interaction between monomers of copolymer and surfactant, (2) displacement of the monomer-micelle equilibrium induced by the copolymer, (3) formation of the surfactant-copolymer aggregation complex, and (4) formation of the mixed micelles. Such a model was applied to most…

Covalently modified halloysite clay nanotubes: synthesis, properties, biological and medical applications

2017

Halloysite (HNT) is a promising natural nanosized tubular clay mineral that has many important uses in different industrial fields. It is naturally occurring, biocompatible, and available in thousands of tons at low cost. As a consequence of a hollow cavity, HNT is mainly used as nanocontainer for the controlled release of several chemicals. Chemical modification of both surfaces (inner lumen and outer surface) is a strategy to tune the nanotube's properties. Specifically, chemical modification of HNT surfaces generates a nanoarchitecture with targeted affinity through outer surface functionalization and drug transport ability from functionalization of the nanotube lumen. The primary focus …

Halloysite nanotubes sandwiched between chitosan layers: novel bionanocomposites with multilayer structures

2018

This work is a contribution to the design of multilayer biocomposites based on halloysite nanotubes (HNTs) and chitosan. Both the polymer and nanotubular inorganic additive have been selected among easily available green materials. An innovative preparation procedure based on the sequential casting of chitosan and HNTs has been proposed in order to obtain multilayer composite biofilms. A physico-chemical investigation (contact angle measurements, differential scanning calorimetry, thermogravimetry) has been conducted to characterize the bionanocomposites. As evidenced by scanning electron microscopy, the nanocomposites possess an intermediate halloysite layer between the chitosan ones. The …

Pluronic nanoparticles as anti-oxidant carriers for polymers

2016

Abstract The immobilization of anti-oxidant stabilizers for polymers, particularly naturally occurring systems, can be considered a valuable route for preventing their migration, volatilization, thermo-degradation and decomposition at typical high processing temperatures, as well as for enhance their solubility in polymers. In this work, an innovative approach for the immobilization of naturally occurring stabilizer, through the encapsulation in copolymer nanoparticles, is proposed. Pluronic nanoparticles (PNPs), based on PEO-PPO-PEO, (PEO: poly (ethylene oxide); PPO: poly(propylene oxide)), without and with quercetin, Q, have been successfully formulated and the critical micellar condition…

A one step enhanced extraction and encapsulation system of cornelian cherry (Cornus mas L.) polyphenols and iridoids with β-cyclodextrin

2021

Abstract The objective of this study was simultaneous extraction and encapsulation of cornelian cherry active principles. As an encapsulating agent, β-cyclodextrin (β-CD) was used to enhance the ultrasound-assisted extraction of cornelian cherry polyphenols and iridoids. Lyophilized cornelian cherry fruit was extracted by four different solvents: pure water, 50% aqueous ethanol (conventional system), 1.5% β-CD water solution and 1.5% β-CD aqueous ethanol solution. The highest enhancement of the extraction efficiency was observed for flavonoids and anthocyanins, especially for cyaniding 3-galactoside and pelargonidin 3-galactoside. Water-ethanolic extract was used to form inclusion complexes…

Covalently modified nanoclays: synthesis, properties and applications

2020

Abstract Clay minerals are phyllosilicates of nanoscale dimensions. According to their ability to entrap and release organic moieties, they have found applications in several fields, such as drug carrier and delivery, support for catalyst, environmental remediation and filler for polymeric matrices. The possibility to modify, by covalent linkage, their surfaces gives the possibility to form new nanomaterials with improved properties respect to the pristine clay minerals. In this chapter, the modifications of the siloxane surfaces of the most representative clay minerals, namely montmorillonite, sepiolites, laponite and halloysite were reviewed and discussed.

Halloysite nanotubes for efficient loading, stabilization and controlled release of insulin

2018

Hypothesis: Oral insulin administration is not actually effective due to insulin rapid degradation, inactivation and digestion by proteolytic enzymes which results in low bioavailability. Moreover insulin is poorly permeable and lack of lipophilicity. These limits can be overcome by the loading of protein in some nanostructured carrier such as halloysite nanotubes (HNTs). Experiments: Herein we propose an easy strategy to obtain HNT hybrid materials for the delivery of insulin. We report a detailed description on the thermal behavior and stability of insulin loaded and released from the HNTs hybrid by the combination of several techniques. Findings: Release experiments of insulin from the H…

Inclusion complexes of triblock L35 copolymer and hydroxyl propyl cyclodextrins: a physico-chemical study

2022

In this work, we studied the formation of supramolecular inclusion complexes (pseudopolyrotaxanes) generated by the interactions between L35 Pluronic (PEO-PPO-PEO triblock copolymer) and hydroxyl propyl-modified cyclodextrins (HP-alpha-CD and HP-beta-CD). The structural characteristics of the L35/CD composites were investigated by X-ray diffraction spectroscopy, which highlighted the effective inclusion of the copolymer. The thermodynamic properties of the pseudopolyrotaxanes were determined through density and speed of sound experiments conducted on aqueous mixtures with various L35/CD compositions, while turbidimetric analyses allowed the investigation of the kinetics of the threading pro…

Determining the selective impregnation of waterlogged archaeological woods with poly(ethylene) glycols mixtures by differential scanning calorimetry

2012

The differential scanning calorimetry (DSC) technique was demonstrated to be a reliable and fast tool for the investigation of the selective impregnation of archaeological woods with poly(ethylene) glycols (PEGs) mixtures. To this aim, waterlogged archaeological woods were impregnated by using aqueous mixtures of PEG 4000 and PEG 400 as well as mixtures of these polymers in the melt state. The efficiency of the treatments was also estimated by determining the total consolidant content entrapped into the cavities of degraded wood by means of DSC and thermogravimetry.

Halloysite nanotubes as nanoreactors for heterogeneous micellar catalysis

2021

Abstract Hypothesis Electrostatic attractions between the anionic head group of sodium alkylsulphates and the positively charged inner surface of halloysite nanotubes (HNTs) drive to the formation of tubular inorganic micelles, which might be employed as nanoreactors for the confinement of non polar compounds in aqueous media. On this basis, sodium alkylsulphates/halloysite hybrids could be efficient nanocatalysts for organic reactions occurring in water. Experiments Sodium decylsulphate (NaDeS) and sodium dodecylsulphate (NaDS) were selected for the functionalization of the halloysite cavity. The composition, the structure and the surface charge properties of the hybrid nanotubes were dete…

AQUEOUS MIXTURES OF A THERMOSENSITIVE CATIONIC BLOCK COPOLYMER AND CYCLODEXTRINS. INCLUSION COMPLEXES FORMATION.

2010

Adsorption of triblock copolymers and their homopolymers at laponite clay/solution interface. Role played by the copolymer nature

2009

The adsorption thermodynamics of copolymers, based on ethylene oxide (EO) and propylene oxide ( PO) units, at the laponite (RD) clay/liquid interface was determined at 298 K. The copolymer nature was tuned at molecular level by changing the hydrophilicity, the architecture and the molecular weight (Mw) keeping constant the EO/PO ratio. Polyethylene (PEGs) and polypropylene (PPGs) glycols with varying Mw and their mixture were also investigated to discriminate the role of the EO and the PO segments in the adsorption process. Enthalpies of transfer of RD, at fixed concentration, from water to the aqueous macromolecule solutions as functions of the macromolecule molality were determined. They …

Quantitative description of temperature induced self-aggregation thermograms determined by differential scanning calorimetry

2012

A novel thermodynamic approach for the description of differential scanning calorimetry (DSC) experiments on self-aggregating systems is derived and presented. The method is based on a mass action model where temperature dependence of aggregation numbers is considered. The validity of the model was confirmed by describing the aggregation behavior of poly(ethylene oxide)-poly(propylene oxide) block copolymers, which are well-known to exhibit a strong temperature dependence. The quantitative description of the thermograms could be performed without any discrepancy between calorimetric and van 't Hoff enthalpies, and moreover, the aggregation numbers obtained from the best fit of the DSC exper…

Non-isothermal thermogravimetry as an accelerated tool for the shelf-life prediction of paracetamol formulations

2021

Abstract In this work, non-isothermal thermogravimetric studies have been carried out on several paracetamol formulations with the aim to predict their shelf-lives under variable storage conditions. Specifically, paracetamol tablets of different brands have been investigated allowing to estimate their pharmaceutical quality by considering the specific drug stability. The proposed protocol is based on the kinetic study of thermogravimetric data by the combination of isoconversional procedures (Friedman and Kissinger-Akahira-Sunose (KAS) methods) and “Master plot” analysis. Accordingly, the kinetics of the paracetamol degradation is totally explored in terms of activation energy, pre-exponent…

Preparation and characterization of bio-organoclays using nonionic surfactant

2015

The present study was aimed at the preparation and characterization of tailor made hybrid materials, whose peculiar hosting capability could be exploited in biotechnological applications. With this purpose, the modification of K10 montmorillonite by intercalation of Tween 20 surfactant, was accomplished. The influence of two internal parameters, namely pH and surfactant/clay ratio, on the surfactant uptake ability by clay was investigated. The adsorption mechanism was elucidated on the basis of complementary kinetic and equilibrium studies and, then, corroborated by the useful information provided by the FT-IR, TGA and XRD characterization. The gathered results allow to draw the conclusion …

Bionanocomposite films containing halloysite nanotubes and natural antioxidants with enhanced performance and durability as promising materials for c…

2020

In the last decade, the interest toward the formulation of polymer films for cultural heritage protection continuously grew, and these films must be imperatively transparent, removable, and should not react/interact with surface of the artworks. In this research, bionanocomposite films, based on chitosan (Ch) and pectin (P) and containing naturally occurring fillers and antioxidants, were formulated by solvent casting methods and were accurately characterized. The natural halloysite nanotubes (HNT) have a two-fold role, specifically, physical compatibilizer and antioxidant carrier. Therefore, the theoretical solubility between Ch and P was estimated considering Hoy&rsquo

Printable Hydrogels Based on Alginate and Halloysite Nanotubes.

2022

The design of hydrogels for the controlled release of active species is an attractive challenge. In this work, we prepared hybrid hydrogels composed of halloysite nanotubes as the inorganic component, and alginate as the organic counterpart. The reported procedure allowed us to provide the resulting materials with a peculiar wire-like shape. Both optical and scanning electron microscopy were used to characterize the morphological properties of the hydrogel wires, whose diameters were ca. 0.19 and 0.47 mm, respectively. The possibility to be exploited as drug delivery systems was carried out by loading the nanoclay with salicylic acid and by studying the release profiles. Thermogravimetric e…

Effects of electrolyte doping on electrodeposited nanostructured manganese oxide and chromium oxide

2020

Abstract Electrolyte additions are used to control the functionality of a nanostructured oxide. Dopant ions affect the size and shape of deposit crystallites and modify the host structure. Such ions can be incorporated into the deposit or form a separate oxide phase. The manganese dioxide family of polymorphs with ion-molecular sieve properties represents the additional possibilities of “template” effects of dopant ions on the phase composition, heterovalent substitution in the cationic sublattice, changes in morphology and alteration of nanocrystallite size during electrocrystallisation. The effects of electrolyte doping in electrodeposited, non-stoichiometric manganese dioxide (NH4+, Li+ …

Selective adsorption of oppositely charged PNIPAAM on halloysite surfaces: a route to thermo-responsive nanocarriers.

2018

Halloysite nanotubes were functionalized with stimuli-responsive macromolecules to generate smart nanohybrids. Poly(N-isopropylacrylamide)-co-methacrylic acid (PNIPAAM-co-MA) was selectively adsorbed into halloysite lumen by exploiting electrostatic interactions. Amine-terminated PNIPAAM polymer was also investigated that selectively interacts with the outer surface of the nanotubes. The adsorption site has a profound effect on the thermodynamic behavior and therefore temperature responsive features of the hybrid material. The drug release kinetics was investigated by using diclofenac as a non-steroidal anti-inflammatory drug model. The release kinetics depends on the nanoarchitecture of th…

Modeling of the Halloysite Spiral Nanotube

2015

A computational SCC-DFTB investigation dealing with the structure of hydrated and anhydrous halloysite nanotubes with a spiral geometry is reported. The peculiar characteristics of these systems are described in terms of tetrahedral and octahedral distortions, of hydrogen bonds geometries involving water molecules and the surfaces in the hydrated nanotube, and of the interlayer interactions in the anhydrous one. When the properties of the spiral nanotube are compared with those of the kaolinite sheet, a certain degree of intrinsic disorder in the halloysite systems is revealed, due to the intrinsic nature of the spiral folding. This is particularly evident in the hydrogen bonds network occu…

Il restauro dello "Scheletro in marmi mischi" della Galleria Abatellis: dalla colofonia naturale ai prodotti di sintesi. Sperimentazione di formulati…

2017

Il lavoro qui presentato ha per oggetto il restauro di un frammento di tarsia marmorea rappresentante uno scheletro, probabilmente in origine collocato all’interno di una cripta o facente parte di un cenotafio o di un monumento sepolcrale, custodito all’interno dei depositi della Galleria Interdisciplinare Regionale della Sicilia di Palazzo Abatellis a Palermo. Della scultura ad alto rilievo, in marmo di Carrara, non si hanno notizie documentarie certe circa l’anno di realizzazione e l’autore, pur potendosi collocare, per lettura analogica con produzioni simili per stile e destinazione, attorno al XVII secolo. Inoltre, l’attento studio dei materiali costitutivi ha permesso di aggiungere un …

Olive mill wastewaters decontamination based on organo-nano-clay composites

2019

Abstract Green composites for environmental applications were successfully prepared by intercalation of the biosurfactant Quillaja saponin onto montmorillonite mineral clay on varying pH and surfactant/clay ratio. Equilibrium adsorption isotherms were constructed and the system was characterized by performing TGA and XRD analyses. The efficiency of the surfactant-modified clay in the removal of the organic content present in olive mill wastewaters (OMW) was evaluated by means of spectrophotometric measurements. The interest for this cogent issue comes from the consideration that, despite their high pollutant content, OMW can be considered as a potential resource of several organic compounds…

Alginate gel beads filled with halloysite nanotubes

2013

Abstract Novel hybrid gel beads with a well defined and controlled size formed by alginate biopolymer and halloysite (Hal) nanotubes were designed, prepared and characterized from the physico-chemical viewpoint. The thermogravimetry made it possible to determine the water content, the total as well as the local compositions of Hal into the gel beads. Dielectric spectroscopy evidenced that Hal reduced the fluctuation of ions. The SEM micrographs showed that the dried beads exhibit a rough surface, with pores in the micrometer range. In addition, the concentration of nanotubes was higher into the bead core at a higher overall loading. The performance of these materials was verified with the s…

FUNZIONALIZZAZIONE E CARATTERIZZAZIONE DI NANOTUBI DI ALLOSITE UTILIZZATI PER LO STUDIO DELL’INCAPSULAMENTO DI DERIVATI FENOLICI

2013

I composti fenolici fanno parte dei metaboliti secondari delle piante e tra questi la curcumina è stata ampiamente studiata per le sue intrinseche proprietà farmacologiche.1-4 La curcumina [bis(4-idrossi-3-metossi-fenil)-1,6-eptadiene-3,5-dione] isolata sotto forma di pigmento giallo dal rizoma secco della curcuma longa è stata utilizzata in presenza di sistemi delivery per applicazioni farmaceutiche.5 Uno degli svantaggi della curcumina è la sua scarsa biodisponibilità in ambiente acquoso;6 problema che può essere risolto incapsulandola in nanocontenitori. Tra i sistemi nanodelivery naturali che non presentano citotossicità vi sono i nanotubi di allosite. I nanotubi di allosite sono…

A comparative thermogravimetric study of waterlogged archaeological and sound woods

2010

Waterlogged archaeological woods Pinus pinaster and Fagus sylvatica L. were analyzed by using TG technique. Degradation processes ascribable to the holocellulose decay were evidenced at nearly the same temperature for sound and archaeological samples. The residual matters at 600 and 900 °C of the sound woods are much lower than those of archaeological waterlogged woods in agreement with the presence of inorganic materials encapsulated during the burial into the marine environment. It was proposed a new protocol to rapidly calculate the maximum water content parameter, which is related to the wood degradation state. TG experiments at variable heating rates were performed to obtain kinetic pa…

Thermodynamics of cyclodextrin-star copolymer threading-dethreading process

2015

We investigated the interactions of a star-like copolymer with cyclodextrins (CD) with different cavity size. Direct measurements of thermodynamic properties were done, and the application of proper molecular models was useful for the interpretation of the involved phenomena. The CD–copolymer inclusion complexes were characterized by isothermal titration calorimetry. The copolymer aggregation induced by temperature was investigated by differential scanning calorimetry, volume and compressibility measurements. The behavior of the ternary T1107/CD/water mixture was interpreted considering competing equilibria. The investigated systems showed an interesting temperature responsive behavior so t…

Halloysite Nanotubes Loaded with Calcium Hydroxide: Alkaline Fillers for the Deacidification of Waterlogged Archeological Woods

2018

A novel green protocol for the deacidifying consolidation of waterlogged archaeological woods through aqueous dispersions of polyethylene glycol (PEG) 1500 and halloysite nanotubes containing calcium hydroxide has been designed. First, we prepared functionalized halloysite nanotubes filled with Ca(OH)2 in their lumen. The controlled and sustained release of Ca(OH)2 from the halloysite lumen extended its neutralization action over time, allowing the development of a long-term deacidification of the wood samples. A preliminary thermomechanical characterization of clay/polymer nanocomposites allows us to determine the experimental conditions to maximize the consolidation efficiency of the wood…

Halloysite based geopolymers filled with wax microparticles as sustainable building materials with enhanced thermo-mechanical performances

2022

This work proposes a novel protocol for the fabrication of halloysite based geopolymers filled with beeswax microparticles obtained from Pickering emulsions. The actual filling of the microwax into the geopolymers has been demonstrated by using several techniques, including thermal analyses, spectroscopies, microscopies and contact angle experiments. According to the morphological and structural investigations, microwax spherical particles (diameter ranging between ca. 3 and 5 μm) have been homogeneously dispersed within the geopolymeric network conferring excellent properties to the hybrid geopolymers in terms of mechanical performances and heat storage capacity although their low content …

Halloysite Nanotubes as Support for Metal-Based Catalysts

Halloysite nanotubes (HNTs) are a natural, biocompatible, environmental friendly and cheap double-layered aluminosilicate mineral that has a predominantly hollow tubular structure. The general stoichiometry of halloysite is Al2Si2O5·4(H2O). The layer units consist of a tetrahedral SiOH sheet stacked with an edge shared octahedral AlO6 sheet with an internal aluminol group AlOH. A water layer exists between the adjacent two layers. Thanks to their structural features, HNTs are suitable for a potential application as support for catalytic composites. Recently, we reported the synthesis of novel palladium-based catalytic systems using halloysite nanotubes modified with imidazolium or triazoliu…

Pickering Emulsion Gels Based on Halloysite Nanotubes and Ionic Biopolymers: Properties and Cleaning Action on Marble Surface

2019

We have fabricated ecocompatible Pickering emulsions based on halloysite nanotubes and ionic biopolymers (chitosan and pectin) from renewable resources. The effect of pectin and chitosan on the Pickering emulsion was investigated by direct visualization of the oil droplets and by the thermodynamic characterization at the interface. Pectin enhances the Pickering emulsion stability, while a phase separation and nonhomogeneous gel was observed in the presence of chitosan. We have demonstrated that the Pickering emulsion in a pectin based gel phase is suitable for wax layer removal from a marble surface. A controlled cleaning is achieved by tuning the contact time between the gel and the marble…

Effect of Polymer Length on the Adsorption onto Aluminogermanate Imogolite Nanotubes

2021

This study evidences the adsorption of model nonionic polymers onto aluminogermanate imogolite nanotubes, attractive porous nanofillers with potential molecular loading and release applications. We resolve the underlying mechanisms between nanotubes and polyethylene glycols with different molecular weights by means of nanoisothermal titration calorimetry. The analysis of the results provides a direct thermodynamic characterization, allowing us to propose a detailed description of the energetics involved in the formation of polymer/imogolite complexes. The affinity toward the nanotube surface is enthalpy-driven and strongly depends on the polymer chain length, which significantly affects the…

Green conditions for the Suzuki reaction using microwave irradiation and a new HNT-supported ionic liquid-like phase (HNT-SILLP) catalyst

2014

A new catalytic system based on modified halloysite nanotubes was employed in the Suzuki reaction under microwave irradiation. A set of solvents, times and bases was screened and the best experimental conditions were obtained when the reactions were carried out for 10 min in water–ethanol at 120 °C in presence of K2CO3 as base. Good recyclability was observed. The new catalytic system was employed using either 1 mol% or 0.1 mol%. The palladium catalyst displayed good activity, allowing the synthesis of several biphenyl compounds in high yield working with only 0.1 mol% palladium loading. The application of microwave irradiation decreased the reaction time and also improved conversion with r…

Extended Investigation of the Aqueous Self-Assembling Behavior of a Newly Designed Fluorinated Surfactant

2009

The physicochemical behavior of the newly synthesized fluorinated 5-hydroxyamino-3-perfluoroheptyl-1,2,4-oxadiazin-6-one (PFHO) surfactant was investigated. Thermal analysis showed that the pure surfactant is thermally stable under an inert atmosphere to 135 degrees C, which is several degrees higher than the melting point (99 degrees C). PFHO is rather active at the water/air interface where it assumes a standing up configuration. It exhibits an enhanced self-assembling behavior; accordingly, the critical micellar concentrations at some temperatures are 2 orders of magnitude lower than those of a similar surfactant having the same phobicity, such as sodium perfluorooctanoate. Even in the d…

Effect of the Biopolymer Charge and the Nanoclay Morphology on Nanocomposite Materials

2016

This work represents a contribution to the design, preparation, and characterization of nanocomposite materials based on biocompatible components. The effects of composition, filler geometry, and polymer charge were highlighted, and their role on the final properties of the nanocomposites was revealed. We combined some biopolymers (methylcellulose, alginate, chitosan) with two nanoclays (kaolinite sheets and halloysite nanotubes) to prepare nanocomposites by means of the casting method from water. The thermal stability, the surface wettability, and the mechanical properties of the obtained films were studied. SEM micrographs highlighted the surface morphology of the biocomposite materials. …

Halloysite-Based Bionanocomposites

2017

Scientific research has been invigorated by a new class of biodegradable materials as alternatives to polymers derived from fossils. Such biomaterials can also offer economic advantages because they are derived from renewable resources. Several biopolymers (gelatin, chitin, chitosan, starch, pectin, cellulose and its modified versions, etc.) have been exploited to produce films and formulations. Their use is limited because of fast degradation, predominant hydrophilic character, and, in some cases, unsatisfactory mechanical properties. However, the properties of these polymers can be improved by using inorganic fillers such as additives. Halloysite nanotube is a promising green filler for t…

Heat capacities and volumes of suspensions in the presence of surfactants

2004

Abstract Density and heat capacity measurements of water–surfactant–silica ternary systems were carried out as functions of the silica and the surfactant concentrations at 298 K. From these properties, the apparent molar volume and heat capacity of the surfactant in a given water+silica mixture were evaluated. As well, the apparent specific volume and heat capacity of silica, at a given concentration, in the water+surfactant mixtures as functions of the surfactant concentration were calculated. Some surfactants (decyltrimethylammonium bromide, sodium octanoate, sodium decanoate, sodium dodecanoate, sodium decylsulfate, sodium perfluorooctanoate and N , N -dimethyldodecylamine- N -oxide) wer…

Current Status of Nanoclay Phytotoxicity

2018

The use of nanotechnology in several fields has created a great interest and its rapid development with application in material science, nanomedicine, medical diagnosis, computer chips, catalysis and so on. The use of nanomaterials represents various advantages, including size, highly active surfaces, unique physico-chemical properties, and in some cases a controlled release of chemicals. In this context phyto-nanotechnology is growing and has promising application in agricultural aspects, such as use of soil remediation, antioxidants, adsorbents, nano-sensor for detection of soil quality, delivery of fertilizers and many others. Plants are very important components of the terrestrial eco-s…

Dispersioni di nanoargille in biofilms. Il ruolo chiave del polimero nel controllo della struttura.

2011

Negli ultimi anni è notevolmente cresciuto l’interesse nei confronti dei nanocompositi. ossia di materiali caratterizzati da una matrice polimerica nella quale sono disperse particelle di dimensione nanometrica. In questo ambito lo sviluppo di sistemi ottenuti dalla combinazione di un biopolimero e di una nanoargilla può costituire una via interessante per realizzare nuovi green materials tecnologicamente interessanti. In virtù di questa considerazione è stato condotto uno studio chimico-fisico su dispersioni di nanotubi di allosite (HNTs) e nanodischi di laponite RD in matrici biopolimeriche (idrossipropilcellulosa e pectina con basso grado di esterificazione) sia in fase acquosa sia in fa…

POROSITY DETERMINATION WITH HELIUM PYCNOMETRY AS A METHOD TO CHARACTERIZE WATERLOGGED WOODS AND THE EFFICACY OF THE CONSERVATION TREATMENTS

2012

The helium pycnometer allows us to measure the cell-wall density of dry woods and the basic density of wood samples soaked with water and/or a consolidant solution if a non-volatile solvent is used. These parameters were correlated to the porosity, which for degraded waterlogged wood is related to the maximum water content. Moreover, this has revealed the possibility of investigating, by means of accurate cell-wall density determination, the efficacy of several consolidants in the treatment of waterlogged woods.

Gold nanoparticles stabilized by modified halloysite nanotubes for catalytic applications

2018

Dispersions of Nanoclays of Different Shapes into Aqueous and Solid Biopolymeric Matrices. Extended Physicochemical Study

2010

Dispersions of nanofillers into aqueous and solid biopolymeric matrices were studied from the physicochemical viewpoint. This work was carried out based on the idea that the combination of biopolymers, derived from renewable resources, and nanofiller, environmentally friendly, may form a new generation of nanomaterials with excellent and unique properties at low cost. To this purpose, two pectins with different degrees of methyl esterification and nanoclays like halloysite and laponite RD were selected. The thermodynamic and structural studies on the aqueous mixtures of pectin and nanoclay were able to discriminate the interactions, which control the adsorption of pectin onto the filler and…

Cyclodextrin/surfactant inclusion complexes: An integrated view of their thermodynamic and structural properties

2021

Cyclodextrins (CDs) play an important role in self-assembly systems of amphiphiles. The structure of CDs provides distinguished physicochemical properties, including the ability to form host-guest complexes. The complexation affects the properties of guest molecules and can produce supramolecular aggregates with desirable characteristics for fundamental and practical applications. Surfactants are particularly attractive host molecules due to their wide variety, availability, responsiveness to different stimuli, and high relevance in different fields, e.g. medical, cosmetic, pharmaceutical, and food industries. The tendency of organization in higher-order supramolecular aggregates arises the…

Synthesis and mesomorphism of related series of triphilic ionic liquid crystals based on 1,2,4-triazolium cations

2021

Abstract The synthesis, liquid crystal and conductivity properties of a series of 27 salts based on the 5-(4-(alkyloxy)phenyl)-1,2,4-triazol-4-ium cation bearing a perfluoroalkyl chain with triflate, tetrafluoroborate and bistriflimide anion are reported. The cations are regarded as triphilic on account of their three distinct regions – hydrocarbon, fluorocarbon and ionic. The mesophases were characterised by a combination of polarised optical microscopy, calorimetry and small-angle scattering experiments using both X-rays and neutrons, while thermal stability was probed using thermogravimetric analysis. The liquid crystal properties are found to be dependent on the anion and the length of …

Inside Back Cover: Aggregation Processes of Perylene Bisimide Diimidazolium Salts (Chem. Eur. J. 42/2015)

2015

Conversion of Organic Dyes into Pigments: Extraction of Flavonoids from Blackberries (Rubus ulmifolius) and Stabilization

2021

The blackberry’s color is composed mainly of natural dyes called anthocyanins. Their color is red–purple, and they can be used as a natural colorant. Anthocyanins are flavonoids, which are products of plants, and their colors range from orange and red to various shades of blue, purple and green, according to pH. In this study, the chemical composition of an extract obtained from blackberries was defined by LC-ESI/LTQOrbitrap/MS in positive and negative ionization mode. Furthermore, we investigated the adsorption process of blackberry extract using several inorganic fillers, such as metakaolin, silica, Lipari pumice, white pozzolan and alumina. The pigments exhibit different colors as a func…

Hybrid supramolecular gels of Fmoc-F/halloysite nanotubes: Systems for sustained release of camptothecin

2017

Supramolecular gel hybrids obtained by self-assembly of Fmoc-L-phenylalanine (Fmoc-F) in the presence of functionalized halloysite nanotubes (f-HNT) were obtained in biocompatible solvents and employed as carriers for the delivery of camptothecin (CPT) molecules. The synthesis of the new f-HNT material as well as its characterization are described. The properties of the hybrid hydrogels and organogels were analyzed by several techniques. The presence of small amounts of f-HNT allows good dispersion of the tubes and the subsequent formation of homogeneous gels. The experimental results show that f-HNT functions only as an additive in the hybrid gels and does not demonstrate gelator behavior.…

Dicationic organic salts: gelators for ionic liquids

2014

Diimidazolium and dipyrrolidinium organic salts were tested for their ability to gel both organic solvents and ionic liquids. Organic salts containing 1-(1-imidazolylmethyl)-3,5-di-(3'-octylimidazolylmethyl)-benzene and 1-(N-pyrrolidylmethyl)-3,5-di-(N,N-octylpyrrolidylmethyl)-benzene cations were used. In addition to the simple bromide anion, also dianions having a naphthalene core such as 1,5- and 2,6-naphthalenedisulfonate and 2,6-naphthalenedicarboxylate were taken into account. Gelation tests demonstrated that organic salts used were able to harden ionic liquids. The materials obtained were investigated for their thermal stability and also for electric conductivity properties using mic…

Kinetic and equilibrium study for cadmium and copper removal from aqueous solutions by sorption onto mixed alginate/pectin gel beads

2013

Abstract Kinetic and equilibrium studies have been carried out to evaluate Cd(II) and Cu(II) sorption from aqueous solution by calcium alginate and new synthesized hybrid calcium alginate/pectate gel beads with different alginate/pectate concentration ratios. Physical and chemical properties of the beads were characterized by different techniques (SEM, EDX, TGA). The best experimental pH conditions were selected on the basis of a study on the acid–base properties of pectin and alginate in aqueous solution and their ability to act as sequestering agents for copper(II) and cadmium(II) ions. Calcium released during the sorption process was determined in order to elucidate a possible ion exchan…

FUNZIONALIZZAZIONE DELLA SUPERFICIE DELL’ALLOSITE MEDIANTE RISCALDAMENTO A MICROONDE

2012

L’allosite (Al2Si2O5•2H2O), è un alluminosilicato naturale, chimicamente simile al caolino; essa ha una struttura tubolare cava dell’ordine dei micrometri (0.5-1 μm ) e un diametro interno dell’ordine dei nanometri (15 nm ). I nanotubi di allosite (HNT) presentano sulla superficie esterna gruppi SiO2 mentre su quella interna gruppi AlOH. Viste le caratteristiche strutturali, HNT trovano applicazioni come Host, fungendo in alcuni casi da nanoreattori. Tali applicazioni sono però limitate dall’idrofilia della superficie, sia interna che esterna. In questo lavoro è stata sviluppata una nuova metodologia sintetica che prevede l’ultilizzo delle microonde per ancorare organosilani come precursori…

Halloysite nanotubes/pluronic nanocomposites for waterlogged archeological wood: thermal stability and X-ray microtomography

2020

Filling a polymer with halloysite nanotubes is considered a promising strategy to generate nanocomposites with tailored physicochemical properties. We have focused our attention on pluronic block copolymer/halloysite nanocomposites prepared by melt blending. The effect of composition on thermal stability and polymer crystallinity was investigated by thermogravimetry and differential scanning calorimetry. Electron microscopy was used to monitor the nanoparticle distribution in the polymeric matrix. The pluronic thermal stability is reduced by the clay nanoparticles. Concerning the polymer crystallinity, it is slightly decreased even if the melting temperature is lowered by halloysite. Furthe…

Filling of Mater-Bi with Nanoclays to Enhance the Biofilm Rigidity

2018

We investigated the efficacy of several nanoclays (halloysite, sepiolite and laponite) as nanofillers for Mater-Bi, which is a commercial bioplastic extensively used within food packaging applications. The preparation of Mater-Bi/nanoclay nanocomposite films was easily achieved by means of the solvent casting method from dichloroethane. The prepared bio-nanocomposites were characterized by dynamic mechanical analysis (DMA) in order to explore the effect of the addition of the nanoclays on the mechanical behavior of the Mater-Bi-based films. Tensile tests found that filling Mater-Bi with halloysite induced the most significant improvement of the mechanical performances under traction force, …

Chemical modification of halloysite nanotubes for controlled loading and release.

2020

Clay minerals have been used for medical purposes from ancient times. Among them, the halloysite nanotube, an aluminosilicate of the kaolin group, is an emerging nanomaterial which possesses peculiar chemical characteristics. By means of suitable modifications, such as supramolecular functionalization or covalent modifications, it is possible to obtain novel nanomaterials with tunable properties for several applications. In this context the covalent grafting of suitable organic moieties on the external surface or in the halloysite lumen has been exploited to improve the loading and release of several biologically active molecules. The resulting hybrid nanomaterials have been applied as drug…

Mixed aggregates based on tetronic-fluorinated surfactants for selective oils capture

2015

Abstract An aqueous star-like copolymer solution was titrated with perfluoro carboxylic acids at various compositions to prepare a polymeric surfactant composed of fluorinated nano-domains. The copolymer is X-shaped where each arm contains ethylene oxide and propylene oxide repetitive units linked to a central ethylenediamine group. The aggregation behavior of the hybrid macromolecule was studied from the physico-chemical point of view by changing parameters like temperature and composition. The solubilization of perfluorinated and hydrogenated alcohols in mixed self-assembled structure revealed that a selectivity toward the fluorinated moiety can be done. The self-assembled structures are …

Effect of Polarity of Solvent on Silanization of Halloysite Nanoclay Using (3-Glycidyloxy propyl) Trimethoxy Silane

2021

Abstract: The grafting of silane groups on clay surfaces has been recently investigated in order to fabricate versatile compounds with new potential applications in materials science and ecological engineering. This work explored the influence of variety of solvents with variable polarity on the silanization of halloysite nanoclay (HNT) surface by (3-Glycidyloxy propyl) trimethoxy silane. To this purpose, the functionalization of HNT by 3-Glycidyloxypropyltrimethoxysilane (GOPTMS) has been conducted in Ethanol (polar protic solvent), Tetrahydrofuran (THF) and Acetonitrile (polar aprotic solvents), and Hexane, 1,4-Dioxane and Toluene (non polar solvents). The silane grafted materials were ch…

Caratterizzazione e valutazione dell’attività anti proliferativa di nuovi sistemi per il drug carrier Allosite-sali triazolici/cardanolo

2014

Da precedenti studi è stato valutato che i nanotubi di allosite modificati con sali triazolici (f-HNT), sono dei promettenti sistemi carrier per molecole biologiche1. In questo lavoro si riportano i risultati ottenuti studiando gli f-HNT come carrier per il cardanolo, molecola con interessanti attività biologiche. L’interazione fra il cardanolo e gli f-HNT è stata valutata tramite HPLC, spettroscopia FTIR, analisi termogravimentrica, misure di angolo di contatto e microscopia a scansione elettronica. Infine sono stati studiati sia il rilascio del cardanolo dal sistema che gli effetti citotossici del complesso f-HNT/Cardanolo verso linee cellulari di epatocarcinoma. I dati sperimentali otten…

Thermal and dynamic mechanical properties of beeswax-halloysite nanocomposites for consolidating waterlogged archaeological woods

2015

Abstract Thermal and mechanical properties were determined for the halloysite nanotubes (HNT)/beeswax composites at various compositions. The beeswax degradation temperatures and time course, provided by thermogravimetry (TG), evidenced the improvement of the thermal properties operated by HNT. Differential scanning calorimetry (DSC) allowed us to determine the enthalpy of melting as well as the time course of the melting process for beeswax. A slight loss of beeswax crystallinity was observed upon HNT addition. The dynamical mechanical analysis (DMA) provided the loss and the storage modulus for the nanocomposites upon heating and it was shown that the nanoclays create an inorganic framewo…

Pickering Emulsions Stabilized by Halloysite Nanotubes: From General Aspects to Technological Applications

2022

Besides surfactants, which decrease the interfacial tension between two immiscible liquids, also interfacially active particles can successfully stabilize an emulsion system by attaching at the liquid–liquid interface. The preparation of the resulting Pickering emulsions has been so far investigated starting from the study of the interactions arising between the dispersed droplets and the stabilizers, till the application of these systems in a wide range of different fields. This work is intended to provide an overall overview about the development of Pickering emulsions by considering the most general aspects and scanning the diverse types of solid stabilizers. Among them, Halloysite nanot…

Development and characterization of co-loaded curcumin/triazole-halloysite systems and evaluation of their potential anticancer activity.

2014

Abstract Positively charged halloysite nanotubes functionalized with triazolium salts (f-HNT) were employed as a carrier for curcumin molecules delivery. The synthesis of these f-HNT new materials is described. Their interaction with curcumin was evaluated by means dynamic light scattering (DLS) and UV–vis spectroscopy in comparison with pristine unmodified HNT (p-HNT). The curcumin load into HNT was estimated by thermogravimetric analysis (TGA) measurements, while the morphology was investigated by scanning electron microscopy (SEM) techniques. Release of curcumin from f-HNT, at three different pH values, by means of UV–vis spectroscopy was also studied. Furthermore, different cancer cell …

Temperature-responsive inclusion complex of cationic PNIPAAM diblock copolymer and γ-cyclodextrin

2012

Aqueous mixtures of γ-cyclodextrin (γ-CD) and the thermosensitive cationic diblock copolymer poly(N-isopropylacrylamide)-b-poly(3-acrylamidopropyl)trimethylammonium chloride (PNIPAAM24-b-PAMPTAM(+)9) or the PNIPAAM homopolymer PNIPAAM47 have been investigated using various experimental methods. Solid γ-CD–polymer inclusion complexes (pseudopolyrotaxanes) form at ambient temperatures in fairly concentrated CD solutions. The NMR measurements showed that the stoichiometry of the inclusion complexes is close to two NIPAAM units per CD molecule. The cationic block of the copolymer is not incorporated into the CD cavity. Synchrotron radiation X-ray diffraction spectra of the solid inclusion compl…

Microwave-assisted synthesis of novel cyclodextrin–cucurbituril complexes

2011

Microwave irradiation was successfully used in order to obtain stable supramolecular aggregates between cyclodextrins and cucurbiturils, without the participation of any long-chain common ‘molecular thread’ guest. These aggregates were characterised by means of various different techniques, namely NMR, thermogravimetry, polarimetry and ESI-MS. Cross-analysis of experimental data allowed us to obtain insights on the stoichiometries of the composites and their thermal stabilities. The possible structures of the composites are briefly discussed, as well as the actual nature of their intrinsic stability.

Chemical and biological evaluation of cross-linked halloysite-curcumin derivatives

2020

Abstract Well designed and safe nano drug carrier systems are an important tool in biomedical applications. The combination of two or more drugs has been used in medicine both to enhance the therapeutic effect and to decrease the side effects of drugs. Biocompatible halloysite nanotubes, that possess two different surfaces, are a suitable nanomaterial for a simultaneous carrier and release of two drugs that can exert a synergistic effect against cancer cells. In this study, three curcumin derivatives and doxorubicin were loaded by supramolecular and covalent linkage at the lumen and external surface of the halloysite nanotubes. The obtained multifunctional systems were characterized by seve…

Modified Halloysite Nanotubes: Nanoarchitectures for Enhancing the Capture of Oils from Vapor and Liquid Phases

2013

We prepared hybrid halloysite nanotubes (HNT/sodium alkanoates) in which the inner cavity of the nanoclay was selectively modified. Physicochemical studies evidenced the interactions between HNT and sodium alkanoates, ruled out clay exfoliation, quantified the amount of the loaded substance, and showed an increase of the total net negative charge, allowing us to obtain rather stable aqueous nanoclay dispersions. These dispersions were exploited as inorganic micelles to capture hydrocarbon and aromatic oils in the vapor and liquid states and were revealed to be nonfoaming but very efficient in encapsulating oils. Here, we have fabricated biocompatibile and low-cost inorganic micelles that ca…

NMR Spectroscopic characterization and thermal behaviour of a new class of dicationic imidazolium ionic liquids

Halloysite nanotubes-carbon dots hybrids multifunctional nanocarrier with positive cell target ability as a potential non-viral vector for oral gene …

2019

Abstract Hypothesis The use of non-viral vectors for gene therapy is hindered by their lower transfection efficiency and their lacking of self-track ability. Experiments This study aims to investigate the biological properties of halloysite nanotubes-carbon dots hybrid and its potential use as non-viral vector for oral gene therapy. The morphology and the chemical composition of the halloysite hybrid were investigated by means of high angle annular dark field scanning TEM and electron energy loss spectroscopy techniques, respectively. The cytotoxicity and the antioxidant activity were investigated by standard methods (MTS, DPPH and H2O2, respectively) using human cervical cancer HeLa cells …

Calorimetry: a Valuable Tool for Emerging Smart Nanomaterials

2012

It is well known that calorimetry is a powerful technique to determine the complete energetics (standard free energy, enthalpy and entropy) of interaction processes. We are now assisting to the increment of the use of nano-calorimetry, which appears rather versatile because it can evidence weak interactions quickly and accurately and, furthermore, needs very small amounts of material. Unfortunately, over the years the calorimetry has been applied to restricted fields so that it has been underemployed in studying smart nanomaterials (polypseudorotaxanes, polymeric aggregates, surface functionalized nanoparticles, nanocomposites, etc.) to which a tremendous scientific interest has been recent…

Colloidal stability and self-assembling behavior of nanoclays

2020

Abstract Currently, nanoclays are attracting the attention of a wide part of the scientific community, due to some of their most peculiar features that make them good candidates for applications in different fields. In light of this, some strategies can be pursued in order to obtain stable colloidal dispersions of nanoclays with the aim to improve their features and to expand their use. Hence, this chapter presents an overview on the structural and morphological characteristics, the physico-chemical properties and the main approaches that are taken into account for the preparation of homogeneous suspensions of Halloysite, Imogolite and Laponite in both aqueous and apolar solvent media. In p…

Functionalized halloysite multivalent glycocluster as a new drug delivery system.

2020

A new design for halloysite nanotube materials was obtained by grafting chemically modified cyclodextrin units onto the nanotube surface. In particular, grafted cyclodextrins were decorated with thiosaccharide pendants, in order to mimic the well-known binding of sugars to proteins and the glyco-cluster effect occurring during cellular recognition events. The obtained materials were characterized by using a combination of varied techniques (FT-IR spectroscopy, thermogravimetric analysis, scanning electron microscopy, dynamic light scattering, turbidimetry), and their potential drug-delivery abilities were tested by studying their interactions with the common naturally occurring anticancer a…

Nanocomposites based on esterified colophony and halloysite clay nanotubes as consolidants for waterlogged archaeological woods

2017

We have designed an innovative protocol for the consolidation of waterlogged archaeological woods by using acetone mixtures of halloysite clay nanotubes and a chemically modified colophony (Rosin). Firstly, we have investigated the thermal properties of HNTs/Rosin nanocomposites, which have been prepared by means of the casting method from acetone. The HNTs content have been systematically changed in order to study the influence of the inorganic filler on the thermal stability and glass transition process of Rosin. We have observed that the thermal properties of the hybrids are affected by the specific HNTs/Rosin interactions. Then, acetone dispersions of HNTs/Rosin composites at variable f…

Stability of Halloysite, Imogolite, and Boron Nitride Nanotubes in Solvent Media

2018

Inorganic nanotubes are attracting the interest of many scientists and researchers, due to their excellent application potential in different fields. Among them, halloysite and imogolite, two naturally-occurring aluminosilicate mineral clays, as well as boron nitride nanotubes have gained attention for their proper shapes and features. Above all, it is important to reach highly stable dispersion in water or organic media, in order to exploit the features of this kind of nanoparticles and to expand their applications. This review is focused on the structural and morphological features, performances, and ratios of inorganic nanotubes, considering the main strategies to prepare homogeneous col…

The Essential Oil of Thymbra capitata and its Application as A Biocide on Stone and Derived Surfaces

2019

Many chemicals used nowadays for the preservation of cultural heritage pose a risk to both human health and the environment. Thus, it is desirable to find new and eco-friendly biocides that can replace the synthetic ones. In this regard, plant essential oils represent effective alternatives to synthetic substances for the preservation of historical monuments. Thymbra capitata (syn. Thymus capitatus) is a medicinal and aromatic plant growing in the Mediterranean area and endowed with important pharmacological properties related to its essential oil. Among them, the antimicrobial ones make the T. capitata essential oil an ideal candidate for industrial applications

FUNCTIONALIZED HALLOYSITE NANOTUBES FOR ENHANCED REMOVAL OF Hg2+ IONS FROM AQUEOUS SOLUTIONS

2021

AbstractWater is essential for humans, animals, and plants; pollutants, usually derived from anthropogenic activities, can have a serious effect on its quality. Heavy metals are significant pollutants and are often highly toxic to living organisms, even at very low concentrations. Among the numerous removal techniques proposed, adsorption onto suitable adsorbent materials is considered to be one of the most promising. The objective of the current study was to determine the effectiveness of halloysite nanotubes (HNT) functionalized with organic amino or thiol groups as adsorbent materials to decontaminate polluted waters, using the removal of Hg2+ ions, one of the most dangerous heavy metals…

Films of Halloysite Nanotubes Sandwiched between Two Layers of Biopolymer: From the Morphology to the Dielectric, Thermal, Transparency, and Wettabil…

2011

This study focused on the preparation and characterization of films based on biopolymers (hydroxypropylcellulose and low methoxyl pectin) and halloysite nanotubes (HNTs). The morphology is strongly dependent on the polymer nature. In particular, we observed a sandwich-like structure composed of two hydroxypropylcellulose layers incorporating the HNTs and a homogeneous distribution of the nanotubes into the low methoxyl pectin matrix. The different mesoscopic properties were invoked to explain the dielectric, thermal, and wettability properties of the corresponding films. Nanocomposites obtained by combining materials from renewable resources and HNTs is a challenging task in view of designi…

Thermodynamic Study For The Protonation Of Halloysite

2016

The Halloysite (Al2Si2O5(OH)4·2H2O) is an abundant and cheap clay and is considered one of the most promising nano structured and naturally occurring clay mineral. Large deposits of this material are present in France, Belgium, China, New Zealand and USA [1,2]. Among the spheroidal, tubular or platy morphologies, the tubular is the most common and abundant one. Typically, halloysite nanotubes (HNTs) are formed by 15 – 20 aluminosilicate layers, having a length of 1 ± 0.5 μm, and inner and outer diameters of 10 – 15 nm and 50 -70 nm, respectively [1]. In each layer, the SiOH and the AlOH groups are disposed on the external and the internal surfaces, respectively. As consequence, in each nano…

Volumes and heat capacities of the aqueous sodium dodecanoate/sodium perfluorooctanoate mixtures in the presence of β-cyclodextrin

2003

Apparent molar volumes (VΦ) and heat capacities (CΦ) of the sodium dodecanoate (NaL)/sodium perfluorooctanoate (NaPFO) mixtures in the water/β-cyclodextrin (β-CD) solvent as functions of the surfactant total molality (mt) were determined at 25°C. For a given surfactant mixture, VΦ decreases with mt to ca. 0.05 mol kg−1 thereafter it increases tending to a constant value. CΦ displays a behaviour opposite to VΦ. The mt values where the apparent molar properties exhibit extrema are nearly coincident with the critical micellar concentrations determined by conductivity. An equation correlating VΦ to mt was derived by assuming that the equilibria for the 1∶1 surfactant/cyclodextrin complex format…

Simultaneous Removal and Recovery of Metal Ions and Dyes from Wastewater through Montmorillonite Clay Mineral

2019

The main objective of this work was to evaluate the potential of Montmorillonite nanoclay (Mt), readily and inexpensively available, for the simultaneous adsorption (and removal) of two classes of pollutants: metal ions and dyes. The attention was focused on two &ldquo

Reduced graphene oxide/silver nanoparticles/β-cyclodextrin nanosponges composites with improved photocatalytic activity

2023

Significant activity improvement was achieved by associating graphene oxide-silver composite photocatalysts with cyclodextrin-based nanosponge materials, due to the synergistic effect provided by the supramolecular host abilities of the nanosponge. Three photocatalysts were prepared, fully characterized (FT-IR, ss-NMR, Raman, XRD, SEM, EDX, AFM, ICP, TGA, potentiometric titration), and tested for the oxidative photodegradation of some dyes and phenols, chosen as model organic pollutants. Compared to the unsupported photocatalyst, the nanosponge-based materials showed enhanced performances (being able to carry out the degradation even of dyes which do not react in the presence of the unsuppo…

Grafting of (3-chloropropyl)-trimethoxy silane on halloysite nanotubes surface

2021

Modified halloysite nanotubes (HNTs-Cl) were synthesized by a coupling reaction with (3-chloropropyl) trimethoxysilane (CPTMS). The incorporation of chloro-silane onto HNTs surface creates HNTs-Cl, which has great chemical activity and is considered a good candidate as an active site that reacts with other active molecules in order to create new materials with great applications in chemical engineering and nanotechnology. The value of this work lies in the fact that improving the degree of grafting of chloro-silane onto the HNT’s surface has been accomplished by incorporation of HNTs with CPTMS under different experimental conditions. Many parameters, such as the dispersing media, the molar…

Biocompatible Poly(N-isopropylacrylamide)-halloysite Nanotubes for Thermoresponsive Curcumin Release

2015

The grafting of poly(N-isopropylacrylamide) (PNIPAAM) onto the halloysite external surface is proposed in order to obtain a novel thermoresponsive drug carrier for curcumin delivery. The new nanomaterial is characterized by means of FT-IR spectroscopy, thermogravimetric analysis, and SEM investigations. A high density of polymer chain was achieved at the nanoparticle surface. The PNIPAAM dehydration phenomenon was observed in water above 32 °C that is nearly coincident with the lower critical solution temperature for the polymer. The colloidal stability as well as the wettability of the obtained nanomaterial may be triggered by temperature stimuli. In vitro tests simulating the gastro-intes…

Chitosan-based smart hybrid materials: a physico-chemical perspective.

2020

Chitosan is one of the most studied cationic polysaccharides. Due to its unique characteristics of being water soluble, biocompatible, biodegradable, and non-toxic, this macromolecule is highly attractive for a broad range of applications. In addition, its complex behavior and the number of ways it interacts with different components in a system result in an astonishing variety of chitosan-based materials. Herein, we present recent advances in the field of chitosan-based materials from a physico-chemical perspective, with focus on aqueous mixtures with oppositely charged colloids, chitosan-based thin films, and nanocomposite systems. In this review, we focus our attention on the physico-che…

Sedimentation of halloysite nanotubes from different deposits in aqueous media at variable ionic strengths

2019

Abstract Halloysite clay is a natural nanomaterial that is attracting a growing interest in colloidal science. The halloysite aqueous dispersion stability is a key aspect for the configuration of a purification protocol as well as to establish the durability of a formulation. A physico-chemical study demonstrated the role of ionic strength and nanotube characteristic sizes on the sedimentation behavior. We highlighted the importance of the electrostatic repulsions exercised between the particles in the settling process. A protocol for image analysis has been proposed to provide robust information from time resolved optical images on the suspensions. In conclusion, we managed to correlate mi…

One-pot synthesis of ZnO nanoparticles supported on halloysite nanotubes for catalytic applications

2020

Abstract A versatile catalyst based on halloysite and zinc oxide (HNT@ZnO) was prepared, for the first time, starting from ZnO commercial bulk form as Zn precursor source, in a one-pot procedure. This strategy gives the possibility to obtain small ZnO nanoparticles loaded on the HNT surface without the use of inorganic salts which envisage the removal of undesired anions and therefore a calcination process at high temperature. It was found that the presence of halloysite improved the UV–vis spectral absorption ability of ZnO. The hybrid was successful used as photocatalyst for the methylorange and rhodamine B degradation. In addition, after eight consecutive cycles for the methylorange phot…

Thermogravimetric analysis. A tool to evaluate the ability of mixtures in consolidating waterlogged archaeological woods

2010

Waterlogged archaeological woods (Pinus pinaster, Ulmus cf. minor and Fagus sylvatica L.) were consolidated by using Colophony, Rosin 100, and a mixture of Poly(ethylene) glycol (PEG) 3000 and Poly(propylene) glycol (PPG) 425. The efficiency of the consolidants was estimated by determining the content entrapped into the cavity of degraded wood. For this purpose, thermogravimetry was demonstrated to be a reliable tool. In the case that the polymeric mixture was used for impregnation, it was also possible to discriminate the amount of PEG 3000 from that of PPG 425 captured by the wood capillaries. Regardless of the wood nature, all the consolidants were present in treated samples in large amo…

Temperature-controlled poly(propylene) glycol hydrophobicity on the formation of inclusion complexes with modified cyclodextrins. A DSC and ITC study.

2011

The study highlighted the main forces driving the formation of hydroxypropyl-cyclodextrins (HP-CDs) + poly(propylene) glycol 725 g mol(-1) inclusion complexes. The temperature parameter was chosen as the variable to modulate the hydrophobicity of the polymer, and consequently ITC experiments as functions of temperature as well as DSC measurements were done in a systematic way. The polymer is not included into HP-α-CD, it is strongly bound to HP-β-CD and it is floating in HP-γ-CD. The stability of the inclusion complexes is entropy controlled. The gain of the entropy is a unique result compared to the opposite literature findings for inclusion complexes based on polymers and CDs. This peculi…